Inhaltszusammenfassung zur Seite Nr. 1
MC2000
Owner’s Manual
2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com
Inhaltszusammenfassung zur Seite Nr. 2
Copyright 2003 by M&S Systems MC2000 and the M&S Digital Networks logo are registered trademarks of M&S Systems. RealOne Player is a registered trademark of RealNetworks, Inc. Windows is a registered trademark of Microsoft Corporation.
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents MC2000 Owner’s Manual...................................................................................... 1 Introduction.............................................................................................................. 3 System Description and Features........................................................................ 3 Important Safety Instructions for the MC2000 ................................................ 5 Getting Started: Set up the System .
Inhaltszusammenfassung zur Seite Nr. 4
Info Menu ................................................................................................................34 Troubleshooting ....................................................................................................36 Warranty.................................................................................................................37 Definitions...............................................................................................................39
Inhaltszusammenfassung zur Seite Nr. 5
Introduction Built around a digital network hub, the MC2000 is a whole-house distributed audio communications system complete with multi-source music, door chimes, intercom, paging, and monitoring. The illustration below shows you the layout of your new MC2000 room station. Volume Controls Display Menu Microphone Control Buttons Figure 1 - Room Station Layout Keep this manual in a safe place for future reference. If you lose the manual, you can download it from the M&S Systems web si
Inhaltszusammenfassung zur Seite Nr. 6
have their favorite rock station blaring in another room. You can even select the music playing in another room to play in the room you’re in. You can program the MC2000 to let you go to sleep with music and to wake up with music. The intercom feature lets you communicate with someone at the front door or talk to someone in another room. The paging feature lets you make announcements (for example, “Dinner is ready. Everyone wash hands and come to the table!”). You can even monitor anothe
Inhaltszusammenfassung zur Seite Nr. 7
Important Safety Instructions for the MC2000 The MC2000 must be installed by certified M&S Systems dealers or installers, and must conform to all local building and electrical codes. DO NOT expose the MC2000 to moisture. Doing so can create fire or shock hazards and void the warranty. DO NOT attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards and will invalidate your warranty. Neither the hub nor the room stations c
Inhaltszusammenfassung zur Seite Nr. 8
Unplug the MC2000 from the wall outlet prior to cleaning. Use only a damp cloth to clean the hub cabinet, room stations, and speakers. Do not wipe the LCD with a damp cloth; use only a soft cloth on the LCD screen. Do not use liquid cleaners or aerosol cleaners. 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 6
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started: Set up the System We recommend you customize your MC2000 prior to using the system. Customizing the system will make the system easier to use and will allow you to access all system features. The Greeting Menu is shown in Figure 2. This is the default MC2000 room station menu. This menu provides you with single button access to several key features. Each of these features will be described later in this document. Currently selected Page all room stations audio media
Inhaltszusammenfassung zur Seite Nr. 10
1. Press the More button shown in Figure 3. More Button Figure 3 - Main Menu 2. Press the Setup button shown in Figure 4. Setup Button Figure 4 - More Screen 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 8
Inhaltszusammenfassung zur Seite Nr. 11
The Setup Menu is where you establish the time, date, and year settings and customize the system to meet your needs for each room with the room station. Assign names to Set the time the roomstations Set the Date Set the privacy features for the room stations Enable or disable password function Set options for the door stations Adjust intercom settings Return to the Main Menu Figure 5 - Setup Menu Set the Time The Set Time menu allows you to set or change the current system t
Inhaltszusammenfassung zur Seite Nr. 12
3. After you have the time at the correct setting, press Set to save the settings or Cancel to discard them. After 30 seconds of inactivity, the room station screen will return to the Greeting Menu shown in Figure 2. Set the Date The Set Date menu allows you to set or change the current system date. Follow the steps below to set or change the date. 1. Press the Set Date button shown in Figure 5. Select month, day The current system date & year to change (month/day/year) Decrease s
Inhaltszusammenfassung zur Seite Nr. 13
Name a Roomstation The Name Room menu allows you to customize each room station’s system name. To change the room station name, follow the steps shown below. 1. Press the Name Room button shown on Figure 5. Name of the room Select the letters of the name. Right and left arrows. Up and down arrows. Save the settings Cancel the changes Figure 8 - Name Room Menu 2. To set the room name use the right and left arrows (shown in Figure 8) to select the character to change and the up
Inhaltszusammenfassung zur Seite Nr. 14
Room Features The Room Features menu allows you to customize each room’s intercom, paging and monitoring settings. These settings must be adjusted at each room station on the MC2000 system. To set the options for a room station follow the steps presented below. Receive page toggle Receive intercom toggle Return to setup menu Receive monitor toggle Press to get to additional options Figure 9 - Room Features Menu All options are toggles; pressing the button alternates between turning
Inhaltszusammenfassung zur Seite Nr. 15
To select one of these room station configurations press the button shown in Figure 2, each button press will toggle between the pre-configured room settings. After 30 seconds of inactivity, the room station returns to the Greeting Menu shown in Figure 2. 2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 13
Inhaltszusammenfassung zur Seite Nr. 16
Door Stations The MC2000 system supports two door stations. Once the doorbells are installed, they will ring on all room stations. Whether the doorbells can be heard or monitored from an individual room station depends on how it’s been set up. To set up the door station functionality for a particular room station, follow the steps shown below. Use the same method shown below to establish the defaults for each of the two door stations. To get to the Door Station Menu select Door Station
Inhaltszusammenfassung zur Seite Nr. 17
2. To change the name of a door station, press the Name Station button. The default MC2000 settings are “Front Door” and “Rear Door”. The Name Station menu looks like the Name a Room menu shown in Figure 8. 3. To set the microphone volume and acoustic decay press the Intercom button shown in Figure 11. These settings allow you to enhance the sound of your MC2000 system and to set the sensitivity of the microphone. Use the top set of up and Use the bottom set of up down arrows to set the
Inhaltszusammenfassung zur Seite Nr. 18
Setting up a Password The Password menu allows you to establish a four-digit password for your MC2000 system. This password protects your system settings and keeps them from being changed. The MC2000 passwords are numerical (numbers 1 – 8) and are four numbers in length. Once a password is established, it must be entered at the room station before making any changes to the room station. Please record your password and keep it in a safe place. Establishing a Password Establishing a pass
Inhaltszusammenfassung zur Seite Nr. 19
Figure 14 - Enter Password Screen 7. You are required to confirm the password by re-entering the same four numbers. A confirmation screen tells you the password has been set. DO NOT FORGET THIS NUMBER! Record it in a safe place for safekeeping. If you forget the password number, you will not be able to make changes to the setup menu (for example, changing the time) and will have to contact M&S Systems technical support team at 1-800-366-9422 to get instructions for resetting your pa
Inhaltszusammenfassung zur Seite Nr. 20
Removing or Changing a Password Follow the steps below to change or remove your MC2000 password. You will need to have the current password to complete this step. 1. Press Setup from the Main Menu shown in Figure 3. You will be prompted to enter the password as shown in Figure 16. Figure 16 - Enter Password Screen 2. Enter the password. 3. Press the Password button shown in Figure 5. 4. To change the password, press the Change Password button shown in Figure 17. Figure 17 -
