Inhaltszusammenfassung zur Seite Nr. 1
Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
DXZ548RMP
RDS-EON FM / MW / LW RADIO CD / MP3 / WMA
COMBINATION
•
COMBINE RADIO FM/PO/GO RDS-EON-LECTEUR DE CD/
MP3/WMA
•
RDS-EON UKW/MW/LW RADIO CD/MP3/WMA
KOMBINATION
•
COMBINAZIONE DI RADIO RDS-EON FM/MW/LW E
LETTORE CD/MP3/WMA
•
RDS-EON FM/MW/LW RADIO CD/MP3/WMA COMBINATIE
•
COMBINACIÓN DE RADIO RDS-EON DE FM/MW/LW Y
REPRODUCTOR DE CD/MP
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing this Clarion product. ∗ Please read this owner’s manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual. ∗ This manual includes the operating procedures of the CD changer, DVD changer, DAB and TV tuner connected via the CeNET cable. The CD changer, DVD changer and TV tuner have their own man
Inhaltszusammenfassung zur Seite Nr. 3
English English English Display Items Handling Compact Discs Contents 1. PRECAUTIONS ............................................................................................................................... 3 • Do not use commercially available CD protec- Use only compact discs bearing the or : Manual indication Handling Compact Discs ................................................................................................................. 4 tion sheets or discs equipped with stabi
Inhaltszusammenfassung zur Seite Nr. 4
English English English Français Deutsch Italiano Nederlands Español Svenska Português Names of the Buttons and Their Functions CONTROLS / LES COMMANDES / REGLER / CONTROLLI 3. NOMENCLATURE 2. • Switch the operation mode among the Radio [FNC] button REGELAARS / CONTROLES / KONTROLLER / CONTROLOS mode, etc. Note: • Press the button to turn on the power. • Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold). Press and hold the button for 1second
Inhaltszusammenfassung zur Seite Nr. 5
English 4. DCP The control panel can be detached to prevent Storing the DCP in the DCP Case theft. When detaching the control panel, store it Hold the DCP, in the orientation as shown in the in the DCP (DETACHABLE CONTROL PANEL) figure below, and put it into the supplied DCP case to prevent scratches. case. (Ensure the DCP is in the correct orienta- We recommend taking the DCP with you when tion.) leaving the car. DCP Removing the DCP 1. Press the [FNC] button for 1 second or longer to switch of
Inhaltszusammenfassung zur Seite Nr. 6
English 5. REMOTE CONTROL (Optional) Receiver for remote control unit If you buy the RCB-164 sold separately, you can enjoy the use of Operating range: 30˚ in all directions the Remote Control function. Signal transmitter Remote control unit [ ] [ ] FUNC 2-ZONE [ ] [ ],[ ] [ ],[ ] [ ] BAND [ ] TA [ ] [ ] MUTE DISP [ ] [PS/AS] PTY [ ] AF Inserting the Batteries 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. AA (SUM-3, IEC
Inhaltszusammenfassung zur Seite Nr. 7
English Functions of Remote Control Unit Buttons Mode CD changer Radio (RDS) /DAB CD/MP3/WMA TV DVD changer Button [FUNC] Switches among radio, DAB, CD/MP3/WMA, CD changer, DVD changer, TV. Plays the first track Moves the next disc [BAND] Switches reception Switches reception while in the CD in increasing order. band. band. mode. Top play. Plays the first track of a current folder in the MP3/WMA mode. [ ] , [ ] Increases and decreases volume (in all modes). Moves preset Moves tra
Inhaltszusammenfassung zur Seite Nr. 8
English 6. OPERATIONS Note:Be sure to read this chapter referring to the front diagrams of Basic Operations chapter “2. CONTROLS” on page 5 (unfold). Adjusting the volume CAUTION Turning the [ROTARY] knob clockwise increases Be sure to lower the volume before switch- the volume; turning it counterclockwise de- ing off the unit power or the ignition key. The creases the volume. unit remembers its last volume setting. If you ∗ The volume level is from 0 (minimum) to 33 (maxi- switch the power off
Inhaltszusammenfassung zur Seite Nr. 9
English Basic Operations Adjusting the tone Adjusting the treble (Gain, Press the [A-M] button and select the item to Frequency) adjust. Each time you press the [A-M] button, This adjustment can be performed when the Z- the item changes as following order: Enhancer Plus is set to “CUSTOM”. ●When “BASS BOOST” is set 1. Press the [A-M] button and select “TREBLE”. “B-BOOST 0” ➜ “BAL 0” ➜ “FADER 0” ➜ 2. Turning the [ROTARY] knob clockwise em- Last function mode. phasizes the treble; turning it count
Inhaltszusammenfassung zur Seite Nr. 10
English Basic Operations Radio Operations Adjusting the Z-Enhancer Plus Listening to the radio 1. Press the [Z+] button and select the Z-En- 1. Press the [FNC] button and select the radio hancer Plus mode to adjust. mode. The frequency or PS appears in the display. 2. Press the [A-M] button and turning the [RO- ∗ PS: Programme service name TARY] knob clockwise adjusts in the + direc- tion; tuning it counterclockwise adjusts in the 2. Press the [BND] button and select the radio - direction. band.
Inhaltszusammenfassung zur Seite Nr. 11
English Radio Operations Manual tuning Auto store There are 2 ways available: Quick tuning and Auto store is a function for storing up to 6 sta- step tuning. tions that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a When you are in the step tuning mode, the fre- previously stored station remains unoverwritten quency changes one step at a time. In the quick at the memory position. tuning mode, you can quickly tune the desired frequency. 1. Press the [BND]
Inhaltszusammenfassung zur Seite Nr. 12
English RDS Operations 1. Press and hold the [T] button for 1 second or RDS (Radio Data System) longer to switch to the adjustment selection This unit has a built-in RDS decoder system that display. supports broadcast stations transmitting RDS data. 2. Turning the [a] or [d] button to select This system can display the name of the broad- “LINK ACT”. cast station being received (PS) and can auto- matically switch to the broadcast station with the 3. Turn the [ROTARY] knob clockwise for “LNK best
Inhaltszusammenfassung zur Seite Nr. 13
English RDS Operations ∗ Some countries do not yet have PTY broadcast. TA (Traffic Announcement) ∗ In the TA standby mode, a TP station has priority In the TA standby mode, when a traffic announce- over a PTY broadcast station. ment broadcast starts, the traffic announcement ●Setting the PTY standby mode broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic When you press the [ ] button, “PTY” lights in programme (TP) automatic tuning is also poss
Inhaltszusammenfassung zur Seite Nr. 14
English RDS Operations 3. If you press and hold any one of the PTY preset memory [DIRECT] buttons for 2 seconds or longer, 1. When you press the [ ] button, the PTY the selected PTY is stored into that preset select mode is turned on. channel memory. 2. Turning the [ROTARY] knob clockwise or counterclockwise to select the desired PTY. The 29 types of PTY below can be selected. PTY item ENGLISH DEUTSCH SVENSKA FRANCAIS Contents News Nachrich Nyheter Infos News Affairs Aktuell Aktuellt Magazine To
Inhaltszusammenfassung zur Seite Nr. 15
English RDS oprations CD/MP3/WMA Operations Emergency broadcast MP3/WMA If an emergency broadcast is received, all the What is MP3? function mode operations are stopped. MP3 is an audio compression method and clas- “ALARM” appears in the display and the emer- sified into audio layer 3 of MPEG standards. gency broadcast can be heard. This audio compression method has penetrated ●Cancelling an emergency broadcast into PC users and become a standard format. If you press the [AF] button, emergency b
Inhaltszusammenfassung zur Seite Nr. 16
English CD/MP3/WMA Operations 2. Files without MP3/WMA data will not play. 1. Types of recording that can be played are as The indication “––:––” appears in the play follows. time display if you attempt to play files with- Setting Set to CD Set to MP3/WMA out MP3/WMA data. Disc ● Logical format (File system) Mixed with CD and Play CD Play MP3/WMA 1. When writing MP3/WMA file on a CD-R disc MP3/WMA type tracks or CD-RW disc, please select “ISO9660 level CD type track only Play CD Play CD 1, 2 or
Inhaltszusammenfassung zur Seite Nr. 17
English CD/MP3/WMA Operations ∗ The mode changes each time the [FNC] button is Note: pressed. (Modes are not displayed for equipment • If the CD playing is not a CD-text CD or no user that is not connected.) title has been input, “NO TITLE” appears in the display. Radio (DAB) CD/MP3/WMA • If MP3/WMA disc is not input TAG, “NO TAG” ap- pears in the display. (CD changer) •For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0. •Tag displays give priority to V2.3 / 2.2. (TV) (AUX) (DVD ch
Inhaltszusammenfassung zur Seite Nr. 18
English CD/MP3/WMA Operations Folder Select Scan play This function allows you to select a folder con- This function allows you to locate and play the taining MP3/WMA files and start playing from first 10 seconds of all the tracks recorded on a the first track in the folder. disc. 1. Press the [DN] or [UP] button. 1. Press the [SCN] button to perform scan play. Press the [DN] button move to the previous The indication “SCN” lights up in the display, play list. and “TRK SCAN” (or “ -SCAN” when se
Inhaltszusammenfassung zur Seite Nr. 19
English CD/MP3/WMA Operations Folder repeat play Play list mode This function allows you to play a track currently This function allows you to play tracks, up to lat- being played in the MP3/WMA folder repeatedly. est 5 time stamps, by reading the play list infor- mation written on the disc. 1. Press and hold the [RPT] button for 1 second or longer to perform folder repeat play. 1. Press and hold the [PLAY LIST] button for 1 second or longer to turn on or off the play list The indications “FOLDE
Inhaltszusammenfassung zur Seite Nr. 20
English Operations Common to Each Mode 7. Repeat step 4 to 6 to enter up to 30 Turning the screen saver function characters for message. on or off 8. Press and hold the [ ] button for 2 This unit is provided with the screen saver func- seconds or longer to store the message in tion which allows you to show various kinds of memory and cancel input message mode. patterns and characters in the Operation Status ∗ Press the [BND] button can cancel the input indication area of the display in a random
