Inhaltszusammenfassung zur Seite Nr. 1
iA9 IB_US version
Size: 178 x 178 mm (16 pages)
Printing color: Black
Mat’l: 90gsm book paper
Apr. 13, 11.
P1
Model iA9
The Home System
® ®
For Your iPhone or iPod
works with
iHome + Sleep
alarm clock app
iHome + Radio
internet radio app
download QR code
reader app and scan
Note: iHome+Sleep and iHome+Radio apps are not covered in detail in this booklet. To learn more about how
these apps can enhance your experience, please download the free iHome+Sleep app from the App Store and
review the
Inhaltszusammenfassung zur Seite Nr. 2
P2 Table of Contents Quick Start ........................................................................................................................................................................1 Controls and Indicators / Unit Display ..........................................................................................................................2 Setting Up the Unit ..................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
P3 quick start 1: power 2: antennas 3: inserts RESET TEST Select the dock insert for your iPhone/iPod model from the Snap AM antenna into provided Attach AC adaptor cable to DC table below and place insert in stand, then plug antenna cable jack on back of the unit and plug dock. To remove insert, place into socket on back of iA9. the other end into a wall socket. thumbnail in slot and gently pull Move antenna 12” away. Extend upwards. FM antenna. NOTE: Inserts provide the best stabil
Inhaltszusammenfassung zur Seite Nr. 4
P4 Controls and Indicators Top Panel Dock Play/Pause Button Alarm 2 Button Nap Button Alarm 1 Button Set + Button, skip/search FWD Volume + Button Wakeup Button Bedtime Button wakeup bedtime Set - Button, Volume - Button alm. reset skip/search REV Alarm Reset / Power Button EQ Button Mode Button Presets Button Snooze/Dimmer Button Rear Panel Time Sync / Set Button Line-in Jack AC Adaptor Jack Time Zone Button DC 7.5V 2.5A time time DST am line in sync/set zone -1 +1 antenna DST
Inhaltszusammenfassung zur Seite Nr. 5
P5 Setting Up the Unit Connect Unit to Power Source Plug the AC adaptor cable into the AC Adaptor Jack and the other end into a standard 120V AC wall socket. Adaptor must be plugged in to operate unit. The unit does not operate on batteries (a battery back up system maintains clock settings during power failures). Updating firmware on the Unit For best performance, make sure to update the unit’s firmware. To do so, download the free iHome+Sleep app from the App Store. Launch the app, then go
Inhaltszusammenfassung zur Seite Nr. 6
P6 Using the Unit Using the Alarms This unit has a dual alarm system so you can set two separate alarms to different alarm times, wake-to sources and frequencies (daily, weekdays or weekend).Tip: Download the free iHome+Sleep app for advanced alarm, snooze and sleep functions Setting the Alarms Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for whichever alarm you are setting 1. Press and hold the or Button until the alarm time
Inhaltszusammenfassung zur Seite Nr. 7
P7 Using the Unit Snooze Operation 1. Default snooze time is 9 minutes. To program a custom snooze time, press and hold the Snooze Button during normal operation (when alarm is not sounding) until the snooze minutes display appears. Press the + or - Button to set the snooze timer from 1 to 29 minutes. Press and release the Snooze/Dimmer Button to exit snooze setting mode. 2. Press and release the Snooze/Dimmer Button after an alarm sounds. The alarm will be silenced for the set snooze duratio
Inhaltszusammenfassung zur Seite Nr. 8
P8 Using the Unit 3. You can set up to 12 presets (6 AM, 6 FM).To memorize a station as a preset: A. Press and release the Mode Button to select the desired AM or FM band. B. Press and release the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then hold the Presets Button until the selected preset number begins flashing in the display. C. Press and release the + or - Button to tune the radio to a desired station. Hold briefly to have
Inhaltszusammenfassung zur Seite Nr. 9
P9 Using the Unit Nap Operation Nap mode lets you set an alarm separate from the Alarm 1 and Alarm 2 settings. The nap wake to source by default is the buzzer alarm, but if an iPhone/iPod is docked (no other source is playing), that will act as the alarm source. If you are listening to the radio or aux-in source, it will be muted and the buzzer will sound at the selected wake time. 1. Press and release the Nap Button located on top of the unit as needed to adjust the nap timer for 5, 10, 15, 2
Inhaltszusammenfassung zur Seite Nr. 10
P10 A Consumer Guide to Product Safety IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water a
Inhaltszusammenfassung zur Seite Nr. 11
P11 Troubleshooting Symptom Possible Problem Solution Unit does not turn on AC adaptor isn't plugged into a working wall Plug the AC adaptor into a working wall socket and plug the connector socket or not plugged into the power supply into the supply jack on the unit jack on back of the unit Unit doesn’t respond Unit requires a reset If unit is plugged in and doesn't respond, try resetting the unit by following these steps: a) remove iPhone/iPod from dock b) unplug unit from power source c)
Inhaltszusammenfassung zur Seite Nr. 12
P12 Troubleshooting Symptom Possible Problem Solution Sound is distorted Volume level is set too high Decrease the volume Sound source is distorted If the iPhone/iPod original sound source is old or of poor quality, distortion and noise are easily noticed with high-power speakers. Try a different audio file from a trusted source such as iTunes. If you are using an external sound source try reducing the output volume on the device itself. Also try turning bass boost OFF. EQ settings are too h
Inhaltszusammenfassung zur Seite Nr. 13
P13 Limited 1 Year Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 1 Year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service
