Inhaltszusammenfassung zur Seite Nr. 1
MODEL
XIS100
Integration Dock for iPod®
INSTALLATION INSTRUCTIONS
08905180D - 1 -
Inhaltszusammenfassung zur Seite Nr. 2
DESCRIPTION Xantech's ‘XIS100' docking station is the industry's first iPod docking station designed for the hi- resolution television revolution. It features a unique component video output capability that will enable owners of the new 480p video output iPods to see their video in full native resolution on a plasma, LCD, or other compatible TV screen with component video input. The ‘XIS100' features a unique on- screen menu display and control system and is compatible with the latest iPo
Inhaltszusammenfassung zur Seite Nr. 3
QUICK START STEP 1: Connect the XIS100 to the power supply and use the included A/V cable to connect to a composite video and audio amplifier. The XIS100 is preconfigured for composite video support. Direct the handheld remote control to the XIS100 and press the ‘power’ button. The blue ring indicator light on the XIS100 will light ‘on’. Be sure the remote control has batteries installed. With a connected display and the XIS100 powered on, the screen on the right will appear
Inhaltszusammenfassung zur Seite Nr. 4
BASIC CONNECTIONS The XIS100 is ready to be used right out of the box. Simply connect a power supply and determine if composite or component video is required. In all cases, the A/V cable must be used to provide left and right audio connections. In component video applications, the composite end on the A/V cable has no connection. Figure A: COMPONENT VIDEO Figure B: COMPOSITE VIDEO 08905180D - 4 -
Inhaltszusammenfassung zur Seite Nr. 5
NOTE 1: The XIS100 is shipped with composite video output selection. To change to component video, first connect the composite video output, then proceed through the ‘settings’ on the on-screen display. In the ‘Settings’ menu, select “TV Out” and then “Component” to set the XIS100 to component video output. Please remember that some iPods do not have a 480p video output, and therefore cannot output video via the XIS100's component outputs. If you use more than one iPod with XIS100 and
Inhaltszusammenfassung zur Seite Nr. 6
REMOTE CONTROL BUTTON CONTROL Main Whenever pressing this button, you Menu can go back to the Main Menu. With XIS100 in stand-by, pressing and holding this key for 5 seconds will reset all settings of the XIS100. The TV will display a confirmation screen. Power Press it to power on and off. Select When you decide to select a item, press it to enter or play it. Select When you are in a menu, press them UP/ to go up and down and select what
Inhaltszusammenfassung zur Seite Nr. 7
BASE STATION – FRONT VIEW BASE STATION 1 Dock Well Connects to the iPod connector. Gently slide the iPod unit into the vertical connector and verify it is not tilted. Included with the XIS100 is a Dock Well adaptor for all iPod units. 2 IR Eye Discreetly hidden is a front panel IR eye used to communicate with the XIS100 remote control. Be sure the remote control is pointing directly towards this lens. 3 Indicator Bar The indicator bar lights up when the unit is on. The indi
Inhaltszusammenfassung zur Seite Nr. 8
BASE STATION – REAR VIEW BASE STATION 4 Video Format This selector switch is used to select NTSC or PAL format. (See NOTE 2 on Page 6) 5 IR IN Modulated IR. Connect to a Xantech IR bus system. 6 RS232/422 Connect to RS232 or RS422 communications devices. Use Xantech RS422 adaptors, sold separately, if needed (See Page 10). To change between 232 and 422, use the on-screen ‘settings’ menu. 7 Component Out Component video output to be connected to a display. 8 A/V Output Composit
Inhaltszusammenfassung zur Seite Nr. 9
SETTINGS MENU NOTE: The XIS100 will retain all its settings until they are changed again. To return the XIS100 to its default settings, place the XIS100 in standby (connected to a power supply, but not turned on). Point the remote towards the XIS100 and press and hold down the “MENU” button on the remote for more than 5 seconds. The XIS100 will acknowledge this reset by indicating so on the TV screen (composite or component output, whichever one that was last selected). Screensaver
Inhaltszusammenfassung zur Seite Nr. 10
About XIS100: This selection will indicate the firmware version and any additional XIS100 information. RS422 ADAPTORS Part number RJ45-to-DB9 Adaptor Description 06500833 Interfaces XIS100 to Xantech RS422232 RS422-to-RS232 Adaptor 06500834 Interfaces XIS100 to Xantech RS2321x8 Router and SP touchpanels CONTROL COMMANDS – RC68X IR COMMANDS Key Definition RC68X 1 Menu 80 2 Power 90 3 Up 20 4 Left E0 5 Select 48 6 Right A8 7 Down 08 8 Volume Up F0 9 Volume Down 98 10 Pla
Inhaltszusammenfassung zur Seite Nr. 11
Xantech Limited Warranty (Effective for products sold after July 1, 2006) Xantech Corporation (“Xantech”) warrants to the holder of a valid proof of purchase as the first end-user purchaser (“You”), its products to be free from defects in materials and workmanship for the periods specified below from the date of purchase. This limited warranty extends only to You for product purchased and used in the United States of America. For product purchased outside of the United States of Ameri
Inhaltszusammenfassung zur Seite Nr. 12
ADDITIONAL NOTES: THREADED INSERT FOR INSTALLATION OF BASE UNIT IN PUBLIC PLACES: A) Remove the two race track shaped bump-ons from the bottom of the docking station to expose two threaded inserts. B) Use M4x0.7 machine screws (not supplied) to secure the XIS100 base unit in place. C) While screw length will be determined by mounting surface thickness, XIS100’s maximum thread depth is 8mm. CONTROL COMMANDS – RS232 SERIAL STRING COMMANDS See document 08905193 – XIS100 Serial
