Inhaltszusammenfassung zur Seite Nr. 1
USER’S GUIDE
V:1041-0208-10
ITP280B
Bar Speaker for iPhone/iPod
For the most up-to-date version of this User’s Guide, go to www .ilive.net
Inhaltszusammenfassung zur Seite Nr. 2
Warnings a nd Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE WARNING: TO REDUCE THE RISK OF BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ELECTRIC SHOCK, DO NOT REMOVE COVER • WARNING: To prevent fire or shock hazards, do not expose this unit (OR BACK). NO USER-SERVICEABLE PARTS to rain or moisture. INSIDE. REFER SERVICING TO QUALIFIED • AveRTIssemeNT: Pour réduire le risque d’incendie ou de choc SERVICE PERSONNEL. électrique, ne pas exposer cet appareil sous la pluie et l’humid
Inhaltszusammenfassung zur Seite Nr. 3
fcc Warnings NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in ac- cordance with the instructions, may cause harmful interference to radio communications. However, there is no gu
Inhaltszusammenfassung zur Seite Nr. 4
Bar sP eaker for iPhone/iPod f eatures • Works with iPhone • Video output • Made for iPod • Line input (3.5mm) • 37” length • Auxiliary input (RCA) • FM radio • Remote control • Station memory presets (20 FM) • Subwoofer output • Last channel memory • S-video output • Treble and bass controls • 2 audio/video inputs • 3.1 channel stereo system • S-video output • Preset EQ • Basic iPhone/iPod controls • Digital clock • Supports Universal docking brackets • SRS TruSurround XT™ with simulated 5.1 •
Inhaltszusammenfassung zur Seite Nr. 5
ta BLe of contents introduction 6 s etu P 8 cL ock, aL ar M, and sL eeP tiM er 9 iPhone/iPod and r adio 10 aV1, aV2, au XiLiary in Put , Line in Put , eQ 11 Basic c onnecti Vity 12 c onnecting the B a r sP eaker to a t V 13 Mounting the Bar sP eaker to a Wa LL 14 c o MPany infor Mation 16 CUsTOmeR HeLPLINe | 1-314-621-2881 iLive | ITP280B 5
Inhaltszusammenfassung zur Seite Nr. 6
introduction Po Wer Press to turn the bar speaker off or on. VoL uMe Press to adjust the volume. source Press to switch between iPod/ iPhone, FM radio, AV1, AV2, Line, and AUX modes. PLay/P ause Press to play or pause a docked iPhone or iPod. iPod dra Wer Press to open and close the iPod docking drawer. Line inPut (3.5mm) Use to connect an MP3 player or other audio source to the bar speaker. reset Press using a paperclip or like Video outPut suBW oofer outPut object to reset the bar speak
Inhaltszusammenfassung zur Seite Nr. 7
standB y/on nuMBer key Pad Press to turn the bar speaker off or on. iPod dra Wer Press to open or close the motorized Mute drawer for iPhone and iPod. Press to mute the volume of the bar speaker. rePeat Press to repeat the current track or aL arM entire album. With the power off, press to set and activate the alarm. Menu uP/do Wn for iPod Press to navigate the menu on a cL ock docked iPhone or iPod. With the power off, press to set the clock. treBLe In EQ mode MUSIC 2.1 or MUSIC 3.1, sLe
Inhaltszusammenfassung zur Seite Nr. 8
s etu P Power Plug the attached AC cord into a standard AC power outlet to power the bar speaker. Battery Power Requires 2 AAA batteries (not included) 8 iLive | ITP280B
Inhaltszusammenfassung zur Seite Nr. 9
cL ock, aL ar M, and sL eeP t iMer s etting the s leep t imer s etting the c lock 1 With the bar speaker powered on, press the 1 Press the Po Wer button to turn the bar sLeeP button repeatedly to set the sleep speaker off. timer. 2 Press the cL ock button on the remote. 2 After the set amount of time expires, the bar The clock will begin to blink. speaker will automatically power off. 3 Press the re V/fWd for iPod Min/hr buttons on the remote to adjust the hour and minute. 4 Press the cL ock
Inhaltszusammenfassung zur Seite Nr. 10
iPhone/iPod and r adio docking an iPhone/iPod t uning the f M r adio 1 Press the Po Wer button to turn the bar 1 Press the Po Wer button to turn the bar speaker on. speaker on. 2 Press the source button to switch to 2 Press the source button to switch to FM iPhone/iPod mode. (iPod button on the radio mode. remote) 3 Press the skiP/tune buttons on the 3 Press the iPod dra Wer button to open the remote to tune the FM radio. MOTORIZED DOCK FOR iPhone/iPod. s aving a station as a Preset 4 Locate
Inhaltszusammenfassung zur Seite Nr. 11
aV1, aV2, a u XiLiary in Put, Line inP ut, and eQ Line input aV1 and aV2 Requires an 3.5mm audio cable (not included) Requires an RCA audio/video cable (not included) 1 Connect 3.5mm audio cable to the Line inPut. Connect the other end of the 1 Connect an RCA audio/video cable to the 3.5mm cable to an MP3 player or other aV1 or aV2 inPuts. Connect the other end audio source. of the RCA cable to the audio/video outputs on a DVD player, stereo system, gaming 2 Press the Po Wer button to turn
Inhaltszusammenfassung zur Seite Nr. 12
Basic c onnecti Vity Below, you’ll see a basic flow chart of how you can connect your home entertainment devices to the bar speaker, and in turn how the bar speaker connects to them. AUDIO S-VIDEO VIDEO AUDIO &/Or VIDEO AUDIO &/Or VIDEO AUDIO DVD PLAYER DIGITAL CABLE or SATELLITE TUNER GAMING CONSOLE VCR SUBWOOFER 12 iLive | ITP280B
Inhaltszusammenfassung zur Seite Nr. 13
c onnecting the Bar sP eaker to a t eLeVision c omposite Video o utput Requires an RCA audio/video cable (not TELEVISION VIDEO INPUT AUDIO OUTPUTS included. 1 Plug an RCA audio/video cable into the COMPOSITE VIDEO OUTPUT (yellow) on the bar speaker and the composite video input (yellow) on a television. 2 Plug the remaining plugs on the included RCA audio/video cable into the RCA AUXILIARY AUDIO INPUTS (red and white) on the bar speaker and the RCA stereo audio outputs (red and white) on
Inhaltszusammenfassung zur Seite Nr. 14
Mounting the Bar sP eaker to a Wa LL important n otes We recommend having this bar speaker professionally mounted. The included spacers should be used at your discretion to extend the face of the bar speaker farther from the wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker needs to be flush with the face of the television. required tools • Manual or Power Screwdriver • Stud Finder • Pencil • Tape Measure • Level included hard
Inhaltszusammenfassung zur Seite Nr. 15
Mounting the Bar sP eaker to a Wa LL g etting started studs 1 Use the t a Pe Measure to decide how high you’d like to hang the bar speaker on the wall. The bar speaker must be hung within 6 feet of screws spacer an AC power outlet for the attached AC power mounting cable to reach. bracket 2 Use the s tud f inder to locate 2 parallel wooden studs to screw the mounting brackets into. 16” 3 Mark the wall at the center of the studs using the Penci L. 4 Line the LeVeL up on both of your marks
Inhaltszusammenfassung zur Seite Nr. 16
c o MPany infor Mation green initiative environmental Commitment to ‘Protect for Today and sustain for Tomorrow’ 2009 marks the official launch of DPI, Inc.’s corporate campaign for a greener and cleaner world. DPI and its four brands, iLive, WeatherX, Capri, and GPX, are building upon environmental initiatives introduced at all of their facilities to help formulate and sustain significant and important conservation efforts within its manufacturing and marketing communities. In addition
