Bedienungsanleitung Altec Lansing inMotion iM510

Inhaltszusammenfassung zur Seite Nr. 1

User’s guide

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

The lightning flash with arrowhead, within an Caution: To prevent the risk of electric shock, do The exclamation point within an equilateral equilateral triangle, is intended to alert the user to not remove cover (or back). No user-serviceable triangle is intended to alert the user to the the presence of uninsulated “dangerous voltage” parts inside. Refer servicing to qualified service presence of important operating and within the product’s enclosure that may be of personnel. maintenance (servi

Inhaltszusammenfassung zur Seite Nr. 4

Power INMOTION IM510 Use one of the following two options to power your inMotion iM510: MOBILE AUDIO AC (Wall outlet) Power Thank you for purchasing this Altec Lansing Insert the barrel connector from the power supply product. For generations, Altec Lansing has into the DC connector on the rear of the inMotion been first in audio innovation. Today, our line of iM510. After this connection is made, insert the power supply into a wall outlet. powered speakers has received more performance awards t

Inhaltszusammenfassung zur Seite Nr. 5

– Turn off the iM510 and disconnect the power 1. Connect one end of the 3.5 mm stereo cable supply. into the auxiliary input jack (AUX) located on the back of the inMotion iM510 system, and the – Use a USB cable (not included) to connect the other end to the headphone or line out jack on iM510 to your computer. your alternate audio device. Note: After syncing the Sansa player to your 2. Set the volume on the audio source at mid-level. computer, be sure to disconnect the USB cable before reconnec

Inhaltszusammenfassung zur Seite Nr. 6

Symptom Possible Problem Solution The Power No batteries are installed. Install four AA batteries (not included) into the LED is battery compartments on the bottom of the not lit inMotion iM510 (two to each compartment). (Battery Make sure the batteries are installed as illustrated Operation). in the battery compartments. The power isn’t turned on. Turn on the inMotion iM510 by pushing the power button located on the top of the unit. A blue LED will light around the button when the power is on.

Inhaltszusammenfassung zur Seite Nr. 7

Symptom Possible Problem Solution There is a The Sansa player is not correctly Turn off the Sansa player, remove it from the crackling seated into the docking station. docking station, reseat it, and turn it on again. sound coming If using an alternate audio source,  Connect an alternate audio source — such as a from the audio source is not properly CD player, MP3 player, or portable DVD player — speakers. connected to the inMotion iM510 to your inMotion iM510 by plugging one end of or there is

Inhaltszusammenfassung zur Seite Nr. 8

This Class B digital apparatus complies with Canadian ICES-003.  Cet appareillage digital de Classe B est conforme au ICES-003 canadien. Corporate Headquarters 535 Rte. 6 & 209, Milford, PA 18337-0277, USA  866-570-5702  570-296-4434  Fax 570-296-6887 Designed in USA. Made in China A11913 R02