Inhaltszusammenfassung zur Seite Nr. 1
SSC-5000
System Keyboard
user manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsung.com/global/register
Inhaltszusammenfassung zur Seite Nr. 2
general facts CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN This symbol indicates that dangerous CAUTION : TO REDUCE THE RISK OF ELECTRIC This symbol indicates that there are voltage consisting a risk of electric shock SHOCK, DO NOT REMOVE COVER (OR BACK) NO important operating and maintenance is present within this unit. USER-SERVICEABLE PARTS INSIDE REFER SERVICING instructions in the literature accompanying TO QUALIFIED SERVICE PERSONNEL this unit. WARNING • To reduce the risk of fire or ele
Inhaltszusammenfassung zur Seite Nr. 3
GENERAL FACTS FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of FCC Rules. These limits are designed to provide reasonable protection agai
Inhaltszusammenfassung zur Seite Nr. 4
general facts CONTENTS 4 Contents GENERAL FACTS 5 Introduction 5 Checking Contents & Accessories 6 Name and function of each part 2 8 Installation Environment Setup INSTALLATION 8 Cautions for Installation 9 Adjusting System Keyboard Angle 9 Fixing Power Cord 8 10 Connecting RS-485 Device CONNECTING WITH OTHER 12 Connecting to PC using USB port EQUIPMENT 12 Connecting Other System Keyboard 13 Basic System Diagram of SSC-5000 10 14 Log-in INSTRUCTIONS 15 Camera control 19 DVR control 14 22 Main
Inhaltszusammenfassung zur Seite Nr. 5
GENERAL FACTS INTRODUCTION SSC-5000 system keyboard is a controller that controls Cameras, DVR, and other devices by using RS-485. An user-friendly on-screen menu, touch screen, and joystick applied, it is easy to operate. Features • Long-distance remote control Through RS-485 communication, remote control is possible up to 1.2 kilometers. (Based on the one System Keyboard) • Integrated System Control A System Keyboard can control Camera (Receiver Unit) and DVR. • You can connect 2 or more Sys
Inhaltszusammenfassung zur Seite Nr. 6
general facts NAME AND FUNCTION OF EACH PART Front side Name Function LCD Display It shows the operating status of the system keyboard.. Camera movement button PRESET, PATTERN, SCAN, AUTO PAN ALARM RESET button Use this to set on or off the alarm. - IRIS control (IRIS CLOSE/OPEN) Camera lens button - FOCUS control (FOCUS NEAR/FAR) - ZOOM control (ZOOM TELE/WIDE) The Pan/Tilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/ DOWN/LEFT/RIGHT. Press the button on the top of Joysti
Inhaltszusammenfassung zur Seite Nr. 7
GENERAL FACTS Back side Name Function USB Port This is a software uploading port of the System Keyboard. Composite Video IN/OUT This is an AV In / Out port. For RS-485 communication, it will be connected to the RS-485 terminals of other System Keyboards or controlling devices such as cameras, and DVR. RS-485 (Port1, 2) M You can specify different protocols for Port 1 and Port 2. DC12V IN DC 12V power input terminal English _7
Inhaltszusammenfassung zur Seite Nr. 8
installation INSTALLATION ENVIRONMENT SETUP The following information is prepared for safe installation of the unit. • This unit can be placed on a flat table or installed in the rack. It should not be used vertically or skew, but horizontally. • The location of the unit and the composition of wiring are very important in properly operating the system. When equipment is placed too close or if ventilation is not properly done, system may not work properly, and maintenance of the system may be di
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION ADJUSTING SYSTEM KEYBOARD ANGLE You may adjust the angle of the product as shown below. FIXING POWER CORD Hang the power cord as shown in the following figure to prevent it from being deviated when you connect it with the main body. English _9
Inhaltszusammenfassung zur Seite Nr. 10
connecting with other equipment You can use the SSC-5000 System Keyboard with a camera, DVR, and the other equipments. This chapter describes how to connect each equipment. CONNECTING RS-485 DEVICE - Connect RS-485 Device through the port in the back of SSC-5000. - You are able to install and control the camera and DVR supporting RS-485 communication. - Either Half Duplex or Full Duplex method is applicable for connection. M For the Half Duplex method, use TX +,-. M To connect RS-485, be careful
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTING WITH OTHER EQUIPMENT Connecting SHR-4081, SHR-4160, SHR-508X Series, SHR-516X Series, SHR-208X and SHR-216X Series DVRs Connect to SSC-5000 through the RS-485 port on the rear of the DVR. Connecting as Half Duplex - Connect TX (+) of the RS-485 port of the DVR to TX (+) of SSC-5000. - Connect TX (-) of the RS-485 port of the DVR to TX (-) of SSC-5000. Connecting as Full Duplex - Connect RX (+) of RS-485 port of the DVR to RX (+) of SSC-5000. - Connect RX (-) of RS-485 port of the
Inhaltszusammenfassung zur Seite Nr. 12
connecting with other equipment Connecting PC Based DVR - Connect SSC-5000 through the RS-485 port in the back of PC Based DVR. - Connect SIGNAL (+) in the RS-485 port of PC Based DVR with TX (+) of SSC-5000. - Connect SIGNAL (-) in the RS-485 port of PC Based DVR with TX (-) of SSC-5000. CONNECTING TO PC USING USB PORT You can use the provided USB cable to connect to the PC with uploading software for updating software of the System Keyboard. CONNECTING O
Inhaltszusammenfassung zur Seite Nr. 13
CONNECTING WITH OTHER EQUIPMENT BASIC SYSTEM DIAGRAM OF SSC-5000 1. One Keyboard to One Device Digital Video Recorder 2. One Keyboard to Multiple Devices (“Daisy-Chain” Type Wiring) Digital Video Digital Video Recorder Recorder 3. Multiple Keyboards to Multiple Devices (“Daisy-Chain”Type Wiring) Digital Video Digital Video Recorder Recorder M Do not use together with the SSC-2000/SSC-1000 because it is different with the SSC-2000/SSC-1000 in communication method. In case of using the keyboard
Inhaltszusammenfassung zur Seite Nr. 14
instructions LOG-IN 1. Turn on the power of all the components of the system. 2. When the power is applied by connecting the power adapter at the Login back of system keyboard, the following indication is displayed on the Operator No. Password LCD screen. Clear Enter 3. Using the keypad of the touch screen or the number key of the Login keyboard, enter the registered Operator number (1~32) and press Error No. . Invalid Operator! The default Operator No. is 1. Clear Refer to “MENU set
Inhaltszusammenfassung zur Seite Nr. 15
INSTRUCTIONS CAMERA CONTROL Selecting a camera 1. Press “CAM” ( ) key. The camera display part of the screen will CAM 002 be as follows. MON 2. Enter the camera number (0~255) you want by using the number key 002 002 and press [ENTER] button. Selecting a monitor This function is to choose a monitor displaying the image of the camera. 1. Press the [MON] button. 2. Enter the monitor number(0~255) that shows the image of the chosen camera and press . PAN/TILT control Move the joystick
Inhaltszusammenfassung zur Seite Nr. 16
instructions PRESET movement Preset CAM Press the [PRESET] button on the keyboard to start PRESET POSITION 000 000 movement. MON Save The screen will appear as shown in the right fi gure. 001 001 Delete PRESET position movement 1. Enter the preset number you want to operate. 2. Press [ENTER] button. PRESET programming This function is to set the camera screen the user wants to call and Preset CAM 000 000 monitor whenever he/she wants to. Maximum 128 screens can be preset. (0~127) MON Save 001
Inhaltszusammenfassung zur Seite Nr. 17
INSTRUCTIONS Clear PRESET mode Preset Press icon on the right below to go out of the PRESET mode. CAM 0 000 00 It will return to the camera control mode. MON Save 001 001 Delete CAMERA TITLE input CAM 1. You can title the selected camera. 000 Press the camera title line to call the title input page on the screen. MON 001 001 2. English small letter input page will appear. CAM 000 000 MON 001 001 TEXT text Number Symbol Back Space Clear OK 3. Press if you want to enter large lette
Inhaltszusammenfassung zur Seite Nr. 18
instructions CAMERA connection information Press the part marked as shown in the right fi gure to know the number CAM 000 of DVR that are connected to the selected camera. MON 001 001 A window will appear as shown in the right fi gure when you press the Connecting Info. CAM camera number display part. 000 MON 001 001 CAM DVR 000 001 Move to the connected device When you press on the connection information screen, DVR 001 will be selected and the screen will be changed into the DVR con
Inhaltszusammenfassung zur Seite Nr. 19
INSTRUCTIONS DVR CONTROL Please refer to the manual of each DVR since DVR’s functions are varied depending on the model. Press the [MENU] button on the DVR set, then go to “System Remote Control Device” in the Settings menu to ensure that "Samsung System Keyboard" is properly set. The DVR will be controllable after the appropriate settings (ID, baud rate, etc.) are set. DVR selection 1. Press the [DVR] button. CAM 000 2. Enter the DVR number (0~255) you want by using the number keys MON an
Inhaltszusammenfassung zur Seite Nr. 20
instructions 4. SHR-2XXX Series, SHR-508X, 516X Series Record Mode Select Channel DVR DVR 012 012 Freeze Search SHR-5082 SHR-5162 Alarm Zoom MON MON 000 Audio Eject 000 Select Channel Select Channel DVR DVR 002 002 SHR-5082 SHR-2042 MON MON 002 002 002 002 Controlling the PTZ device connected to the DVR PTZ devices connected to some DVRs may not be controllable, depending on the DVR model. In this case, press the icon in DVR Control mode and move to Camera Control mode to control the co
