Inhaltszusammenfassung zur Seite Nr. 1
TM
ControlCenter
ADCC0200
ADCC0300
Keyboard Installation and Operation Instructions
Inhaltszusammenfassung zur Seite Nr. 2
ADCC0200 and ADCC0300 Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. Copyright Under copyright laws, the contents of this manual may not be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without prior written consent of American Dynamics Video Products Division.
Inhaltszusammenfassung zur Seite Nr. 3
Keyboard Installation and Operation TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT INSTALL THIS PRODUCT IN HAZARDOUS AREAS WHERE HIGHLY COMBUSTIBLE OR EXPLOSIVE PRODUCTS ARE STORED OR USED. THE EQUIPMENT SUPPLIED WITH THIS MANUAL IS DESIGNED FOR USE IN A GENERAL PUR- POSE CCTV INSTALLATION AND HAS NO OTHER FUNCTION. DO
Inhaltszusammenfassung zur Seite Nr. 4
ADCC0200 and ADCC0300 PPOUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE PAS DÉPOSER LE COUVERCLE. AUCUN COMPOSANT NE PEUT ÊTRE RÉPARÉ PAR L’UTILISATEUR. FAIRE APPEL À UN TECHNICIEN DE MAINTENANCE COMPÉTENT. POUR PRÉVENIR TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CETTE UNITÉ À LA PLUIE NI À L’HUMIDITÉ. NE PAS INSTALLER CET APPAREIL DANS UN ENDROIT DANGEREUX OÙ DES PRODUITS HAUTEMENT INFLAMMABLES OU EXPLOSIFS SONT STOCKÉS ET UTILISÉS. L’ÉQUIPEMENT FOURNI AVEC LE PRÉSENT MANUEL EST CONÇ
Inhaltszusammenfassung zur Seite Nr. 5
Keyboard Installation and Operation UM STROMSCHLÄGE ZU VERMEIDEN, DARF DIE ABDECKUNG NICHT ENTFERNT WERDEN. DAS GERÄT ENTHÄLT KEINE DURCH DEN ANWENDER WARTBAREN TEILE. WARTUNGSARBEITEN DÜRFEN NUR VON QUALIFIZIERTEM WARTUNGSPERSONAL DURCHGEFÜHRT WERDEN. DIESES GERÄT DARF KEINER FEUCHTIGKEIT ODER REGEN AUSGESETZT WERDEN. DIESES PRODUKT DARF NICHT IN GEFAHRENBEREICHEN INSTALLIERT WERDEN, IN DENEN LEICHT ENTFLAMMBARE ODER EXPLOSIVE PRODUKTE GELAGERT ODER VERWENDET WERDEN. DIE ZUSAMMEN MIT DIESEN ANL
Inhaltszusammenfassung zur Seite Nr. 6
ADCC0200 and ADCC0300 PER RIDURRE IL RISCHIO DI SHOCK ELETTRICI, NON RIMUOVERE IL COPERCHIO. L’INTERNO NON CONTIENE PARTI CHE L’UTENTE POSSA RIPARARE. RIVOLGERSI A TECNICI DI ASSISTENZA QUALIFICATI. PER EVITARE IL RISCHIO DI INCENDI O SHOCK, NON ESPORRE L’APPARECCHIO ALLA PIOGGIA O ALL’UMIDITÀ. NON INSTALLARE IL PRODOTTO IN AREE A RISCHIO, NELLE QUALI SONO IMMAGAZZINATI O UTILIZZATI MATERIALI ALTAMENTE INFIAMMABILI O ESPLOSIVI. L’APPARECCHIO CUI QUESTO MANUALE SI RIFERISCE È DESTINATO ALL’USO IN
Inhaltszusammenfassung zur Seite Nr. 7
Keyboard Installation and Operation CON EL FIN DE REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, ABSTÉNGASE DE RETIRAR LA CUBIERTA, YA QUE EN SU INTERIOR NO HAY NINGÚN COMPONENTE QUE PUEDA SER REPARADO POR EL USUARIO. EN EL CASO DE QUE SEA NECESARIO, ACUDA A PERSONAL DE SERVICIO CUALIFICADO PARA QUE REALICE LA REPARACIÓN. NO EXPONGA ESTE DISPOSITIVO A LA LLUVIA O LA HUMEDAD. NO INSTALE ESTE PRODUCTO EN ÁREAS PELIGROSAS EN LAS QUE HAYA ALMACENADAS O SE UTILICEN PRODUCTOS ALTAMENTE INFLAMABLES O EXPLOSI
Inhaltszusammenfassung zur Seite Nr. 8
ADCC0200 and ADCC0300 OM DE KANS OP ELEKTRISCHE SCHOKKEN TE VERMIJDEN, DIENT U DE KAP NIET TE VERWIJDEREN. HET APPARAAT BEVAT GEEN ONDERDELEN DIE DOOR DE GEBRUIKER KUNNEN WORDEN GEREPAREERD. LAAT ONDERHOUD UITVOEREN DOOR GEKWALIFICEERD ONDERHOUDSPERSONEEL. OM DE KANS OP BRAND OF ELEKTRISCHE SCHOKKEN TE VERMIJDEN, DIENT U DIT APPARAAT NIET AAN REGEN OF VOCHT BLOOT TE STELLEN. INSTALLEER DIT PRODUCT NIET IN GEVAARLIJKE OMGEVINGEN WAAR ONTBRANDINGS- OF ONTPLOFFINGSGEVOELIGE STOFFEN STAAN OPGESLAGEN
Inhaltszusammenfassung zur Seite Nr. 9
Keyboard Installation and Operation CHAPTER 1: ABOUT THE ADCC0200 AND ADCC0300 KEYBOARD .................................................. 3 Key Features ....................................................................................................................................... 3 ADCC0200 and ADCC0300 Keyboard Overview ................................................................................4 Feature Quick Reference ..............................................................
Inhaltszusammenfassung zur Seite Nr. 10
ADCC0200 and ADCC0300 CHAPTER 4: PROGRAMMING WITH THE ADCC0200/ADCC0300 KEYBOARDS ............................ 28 Entering Program Mode (RS232 only) ..............................................................................................28 Exiting Program Mode (RS232 only) ................................................................................................. 28 Matrix Menu ...........................................................................................................
Inhaltszusammenfassung zur Seite Nr. 11
Keyboard Installation and Operation Chapter 1: About the ADCC0200 and ADCC0300 Keyboard This chapter describes the features of the ADCC0200/ADCC0300 keyboard. It also describes the location and function of the keyboard's front panel components Key Features The ADCC0200/ADCC0300 is a video control station that is fully compatible with the American Dynamics MegaPower family of matrix switchers. The ADCC0200/ADCC0300 enables the user to view and control cameras and video recorders at local and remo
Inhaltszusammenfassung zur Seite Nr. 12
ADCC0200 and ADCC0300 ADCC0200 and ADCC0300 Keyboard Overview The keyboard consists of the following elements: 1. Clear key - clears any numerical data entered during camera, monitor selection etc. Used to backstep or exit the menu system. 2. Menu key - used to enter the matrix menu system. 3. View key - used to call views. 4. Tour/Sequence key - used to call a sequence. 5. Shift key - when held down, allows multiple use of other keys. 6. Pattern key - used to call patterns. 7. Preset key - used
Inhaltszusammenfassung zur Seite Nr. 13
Keyboard Installation and Operation 11. Numeric keypad - keys ranging from 0 to 9 that enable the user to select specific cameras, monitors, presets, sequences, etc. 12. Monitor key - selects the monitor whose number was entered on the numeric keypad. 13. Camera key - selects the camera whose number was entered on the numeric keypad. 14. Alarm acknowledge key - acknowledges/clears an alarm displayed on the currently active monitor. 15. Focus Near/Focus Far Key - adjusts the lens focus for the se
Inhaltszusammenfassung zur Seite Nr. 14
ADCC0200 and ADCC0300 33. Auxiliary key - toggles auxiliary between ON state and OFF state (if function is available). O 34. Flip key - automatically turns the selected dome through 180 . 35. Auxiliary 2 key - toggles auxiliary 2 between ON state and OFF state. 36. Auxiliary 4 key - In RS485 mode, momentarily switches auxiliary 4 from its OFF state to its ON state for the period the key is held down. In RS232 mode, toggles auxiliary 4 between ON state and OFF state. 37. Last/Decrement key - in T
Inhaltszusammenfassung zur Seite Nr. 15
Keyboard Installation and Operation Feature Quick Reference The features that are available depend on the keyboard in use (ADCC0200 or ADCC0300) and the communication format that is utilized (RS232 or RS485). Standard Matrix Operations FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300 RS485 RS232 RS485 RS232 Select Monitor Monitor number → Select Camera Camera number → Select Matrix/Site Site number → AND Telemetry Enable/Disable Pan Left/Right Joystick Left/Right Tilt Up/Do
Inhaltszusammenfassung zur Seite Nr. 16
ADCC0200 and ADCC0300 Standard Matrix Operations (continued) FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300 RS485 RS232 RS485 RS232 Run Tour Tour number → Hold Tour AND Restart Current Tour Last and Next Camera or (When Tour Held) F1 Function Function number → F2 Function Function number → AND Matrix Menu Operations FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300 RS485 RS232 RS485 RS232 Enter Menu Mode AND Move Cursor Up Joystick Up Move Cursor Down Joystick
Inhaltszusammenfassung zur Seite Nr. 17
Keyboard Installation and Operation Dome Operations FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300 RS485 RS232 RS485 RS232 Enter Dome Menu Mode → AND Exit Dome Menu Mode Via Dome Menu Scroll Up Dome Menu Joystick Up Scroll Down Dome Menu Joystick Down Scroll Left in Dome Menu Joystick Left Scroll Right in Dome Menu Joystick Right Cycle Field Options/Values or (or Twist Joystick) Enter Selection or Program Pattern → Pattern number → AND
Inhaltszusammenfassung zur Seite Nr. 18
ADCC0200 and ADCC0300 VCR (PIP) / Direct Control Mode (All Functions Available in Direct Control Mode) FEATURE KEYBOARD COMMAND ADCC0200 ADCC0300 RS485 RS232 RS485 RS232 Select VCR Mode RS232: VCR number → - - RS485: - - Play Stop Rewind Fast Forward Record Pause Reverse Play Search Menu Enter ENTER key Increment/Decrement or Record or Playback Speed Up Joystick Up Down Joystick Down Left Joystick Left Right Jo
Inhaltszusammenfassung zur Seite Nr. 19
Keyboard Installation and Operation Chapter 2: Connection and Setup This chapter describes the power and data connections between the ADCC0200/ ADCC0300 keyboard and the switching system being used. IMPORTANT NOTE The default setting for the keyboard is RS485 mode at 19200 baud. To change these settings, enter the Special Config menu by pressing SHIFT ( ) and CLEAR ( ) keys within five seconds of powering up the keyboard. Then press one of the following: to change baud rate. to change the mode
Inhaltszusammenfassung zur Seite Nr. 20
ADCC0200 and ADCC0300 Installation Precautions This installation should only be carried out by qualified personnel, and should conform to all local electrical codes. Safeguards should be taken to avoid unintentional operation by employees and maintenance personnel working about the premises, by falling objects, by customers, by building vibration, and by similar causes. CAUTION: DO NOT CONNECT THE POWER SUPPLY UNTIL ALL CONNECTIONS HAVE BEEN VERIFIED Connections for Cable Distance of Greater tha
