Bedienungsanleitung ZyXEL Communications PRESTIGE 660R-6XC

Inhaltszusammenfassung zur Seite Nr. 1

Prestige 660R-6xC Quick Start Guide

Prestige Rear Panel Connections
Prestige Rear Panel Connections
PORT CONNECTION
DSL Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire).
Connect the micro filter(s) (optional – see the appendix in your User’s Guide for details) between the wall
jack and your telephone(s).
Be careful not to insert an RJ-11 connector into the RJ-45 port.
LAN 10/100M Use an Ethernet cable to connect this port to a compu

Inhaltszusammenfassung zur Seite Nr. 2

Prestige Front Panel LED Description Prestige Front Panel LED Description LED COLOR STATUS DESCRIPTION Red On The power to the Prestige is too low. 10/100M Green On The Prestige has a successful 10Mbps Ethernet connection. Blinking The Prestige is receiving or sending data. Amber On The Prestige has a successful 100Mbps Ethernet connection. Blinking The Prestige is receiving or sending data. Off The LAN is not connected. DSL/ACT Green On The Prestige is linked successfully to

Inhaltszusammenfassung zur Seite Nr. 3

P Pr re ep pa ar riin ng g Y Yo ou ur r N Ne et tw wo or rk k All computers must have a 10M or 100M network card and TCP/IP installed. TCP/IP should already be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems. See your User’s Guide for information on configuring static IP address for your computer. These procedures are for dynamic IP address assignment. Setting up Your Windows 95/98/Me Computer Installing TCP/IP Components 1. Click Start, S

Inhaltszusammenfassung zur Seite Nr. 4

3. The Internet Protocol TCP/IP Properties window opens. Click Obtain an IP address automatically. 4. Click Obtain DNS server automatically. 5. Click Advanced, IP Settings tab and remove any installed gateways, then click OK. 6. Click OK to save and close the Internet Protocol (TCP/IP) Properties window. 7. Click OK to close the Local Area Connection Properties window. 8. Turn on your Prestige and restart your computer (

Inhaltszusammenfassung zur Seite Nr. 5

3. Enter “1234”, the default password, to access the SMT main menu. As you type a password, the screen displays an asterisk “ * ” for each character you type. S Sa af fe et ty y W Wa ar rn niin ng gs s For your safety, be sure to read and follow all warning notices and instructions. To reduce the risk of fire, use only No. 26 AWG or larger telephone wire. Do NOT open the device or unit. Opening

Inhaltszusammenfassung zur Seite Nr. 6

T Tr ro ou ub blle es sh ho oo ot tiin ng g PROBLEM CORRECTIVE ACTION The PWR/SYS LEDs Make sure the Prestige’s power adaptor is connected to the Prestige and plugged into an appropriate are off. power source. Check that the Prestige and the power source are both turned on. Turn the Prestige off and on. If the error persists, you may have a hardware problem. In this case, you should contact your vendor. The LAN LED won’t Check the cable connection to the Prestige LAN port. turn on. Mak