Inhaltszusammenfassung zur Seite Nr. 1
User Guide:
GSM2228UG001
Enfora Mini-MT
User Guide
Revision 1.02
Inhaltszusammenfassung zur Seite Nr. 2
Document Title: Enfora Mini-MT User Guide Revision: 1.02 Date: 03/21/2008 Status: Released Document Control ID: GSM2228UG001 General All efforts have been made to ensure the accuracy of material provided in this document at the time of release. However, the items described in this document are subject to continuous development and improvement. All specifications are subject to change without notice and do not represent a commitment on the part of Enfora, Inc. En
Inhaltszusammenfassung zur Seite Nr. 3
Regulatory Compliance FCC The modem was tested and certified to meet FCC Parts 15 in a stand-alone configuration, which demonstrated that the GSM2000 Mini-MT complies with Part 15 emission limits. FCC Part 22 & Part 24 is covered by the Enfora Enabler-IIG "modular approval" process for a transmitter. This approach, described by FCC Public Notice DA 00-131407 released June 26, 2000, is intended to afford relief to equipment manufacturers by eliminating the requirement for obtaini
Inhaltszusammenfassung zur Seite Nr. 4
Enfora shall not be liable for consequential or incidental damages, injury to any person or property, anticipated or lost profits, loss of time, or other losses incurred by Customer or any third party in connection with the installation of the Products or Customer's failure to comply with the information and instructions contained herein.
Inhaltszusammenfassung zur Seite Nr. 5
Warranty Information LIMITED WARRANTY Enfora warrants to the original purchaser of the product that, for a period of one (1) year from the date of product purchase, the product hardware, when used in conjunction with any associated software (including any firmware and applications such as the modem manager) supplied by Enfora, will be free from defects in material or workmanship under normal operation. Enfora further warrants to such original purchaser that, for a period of ninet
Inhaltszusammenfassung zur Seite Nr. 6
applicable warranty period. Enfora shall not have any obligation to provide any software bug fixes, upgrades or new releases except as necessary to correct any covered defect of which purchaser notifies Enfora during the applicable warranty period. Enfora shall have no obligation under this limited warranty for (a) normal wear and tear, (b) the cost of procurement of substitute products or (c) for any defect that is (i) discovered by purchaser during the warranty period but purchaser do
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents 1 INTRODUCTION ...........................................................................................1 2 PRODUCT SPECIFICATIONS......................................................................2 3 GETTING STARTED.....................................................................................3 4 OVERVIEW OF THE ENFORA MINI-MT ......................................................4 4.1 LED INDICATORS............................................................
Inhaltszusammenfassung zur Seite Nr. 8
8.5.1 Reset the modem to factory defaults.............................................31 8.5.2 Connecting the Mini-MT to the Enfora Test Server .......................31 8.5.3 Configure the Modem to Access the GPRS network.....................32 8.5.4 Verify Registration Status..............................................................33 8.5.5 Verify GPRS Activation..................................................................33 8.5.6 Configure the modem to access the Enfora Server..
Inhaltszusammenfassung zur Seite Nr. 9
Table of Figures Figure 1 – Mini-MT Features.................................................................................4 Figure 2 – Mini-MT Front View..............................................................................4 Figure 3 – Mini-MT Side View...............................................................................5 Figure 4 – SIM Door and SIM Lock.....................................................................14 Figure 5 – Open SIM Door....................
Inhaltszusammenfassung zur Seite Nr. 10
Mini-MT User Guide Revision 1.02 1 Introduction This document provides a brief introduction to the Enfora® Mini-MT personal asset tracking device. This guide will provide basic instructions for configuring a Mini-MT for evaluation purposes. Advanced features are described in detail in the following reference documents: • GSM2228AT001 - Enfora Mini-MT AT Commands • GSM2228CB001 - Enfora Mini-MT Cook Book GSM2228UG001
Inhaltszusammenfassung zur Seite Nr. 11
Mini-MT User Guide Revision 1.02 2 Product Specifications System Requirements Application Interface Interface: USB • Host Protocols: AT Commands, UDP/API, L x W x H: 100.33 x 58.92 x 25.4 mm CMUX Housing: Polycarbonate • Internal Protocols: PPP, UDP/API, Weight: 136 g UDP/PAD, CMUX, TCP/PAD TX Power: Class 4 • API Control/Status: AT (2W @850/ 900 MHz) • Real-Time-Clock (RTC), Event Engine Class 1 Scriptable, Friends IP, Wake-Up and Keep (1W @1800/1900 MHz) Alive
Inhaltszusammenfassung zur Seite Nr. 12
Mini-MT User Guide Revision 1.02 3 Getting Started Getting started with the Enfora Mini-MT will require the following: - Mini-MT (GSM2228) - USB to mini-USB cable (not supplied) (CAW-6000-0006) - Activated SIM card (not supplied) - Personal Computer (not supplied) o Operating Systems: Windows 2000, or XP o USB port - The USB drivers for the Mini-MT are available on the Enfora website at www.enfora.com. The customer will need to acquire a user id and password from their dist
Inhaltszusammenfassung zur Seite Nr. 13
Mini-MT User Guide Revision 1.02 4 Overview of the Enfora Mini-MT Geo-Fence User-Defined Speaker Volume Up Volume Down LED’s PTC Microphone (Push To Call) Figure 1 – Mini-MT Features Figure 2 – Mini-MT Front View GSM2228UG001 Page 4
Inhaltszusammenfassung zur Seite Nr. 14
Mini-MT User Guide Revision 1.02 Headset Jack USB Connector Figure 3 – Mini-MT Side View GSM2228UG001 Page 5
Inhaltszusammenfassung zur Seite Nr. 15
Mini-MT User Guide Revision 1.02 4.1 LED Indicators There are four LED’s used to provide status to the user. See Figure 2 for LED information. The LED functions are defined in the table below. Power Mode CALL ON GPS BAT Yellow Yellow Yellow Red Hibernate OFF OFF OFF Low Battery, less than 20% Slow Blink 250mS/10Sec Low Battery, less than 5% OFF Active / Battery Blink when Slow blink Blink when Low Battery, receiving or 500mS/10Sec locked less than 20% originating ca
Inhaltszusammenfassung zur Seite Nr. 16
Mini-MT User Guide Revision 1.02 4.2 Switches 4.2.1 Push To Call (PTC) The Push To Call (PTC) switch allows the user to place a call to a number that has been programmed. To meet GSM specification, pressing the PTC button with no SIM installed will cause the unit to initiate a “411” call. The application provider will need to configure the emergency number for its region. 4.2.2 Set Geo-Fence The switch is used to initiate a geo-fence with a default radius of one-half mile. Th
Inhaltszusammenfassung zur Seite Nr. 17
Mini-MT User Guide Revision 1.02 4.3 Interconnections 4.3.1 USB Connection The USB connector (see Figure 3) is used for charging the battery and for data communication. The unit will charge from a laptop computer, AC to USB power adapter, or vehicle power to USB adapter. (See Figure 3) Data communications with the Mini-MT is also performed through the USB connector. The USB connection is used to configure or customize the Mini-MT operation. This connection also is used to provid
Inhaltszusammenfassung zur Seite Nr. 18
Mini-MT User Guide Revision 1.02 4.3.3 Speaker An integrated speaker allows the user to make a phone call to the pre-configured dispatch number when in hands-free mode. The user can adjust the volume to a comfortable level using the volume up (‘+’) or down (‘-’) buttons. WARNING The Mini-MT is intended for use in speaker mode or headset mode only. Do not use the device held up to the head. The audio levels and ! SAR ratings have not been approved for use in this manner.
Inhaltszusammenfassung zur Seite Nr. 19
Mini-MT User Guide Revision 1.02 4.3.5 SIM A SIM cardholder is located under the battery on the bottom of the Mini-MT. The SIM card is required to enable the voice and data communication capabilities of your Mini- MT device. 4.3.6 Battery A 1340mA/H Li-Ion battery is supplied with the Mini-MT that will allow operation without USB power. The Mini-MT battery life varies based on configuration and use of the Mini-MT. The battery must be installed in the Mini-MT in order to config
Inhaltszusammenfassung zur Seite Nr. 20
Mini-MT User Guide Revision 1.02 5 Battery Removal / Insertion / Charging The Mini-MT is supplied with a 1340mA/H Lithium-Ion rechargeable battery with built- in safety features. The battery should be removed to gain access to the SIM card and for turning the unit off (shipping or travel). The battery is shipped with a red protective cover over the battery terminals and must be removed before use. The following steps provide instructions for how to remove or replace a battery. NOTE
