Inhaltszusammenfassung zur Seite Nr. 1
FEED MIXER
524-15B
ASSEMBLY, OPERATION
AND PARTS MANUAL
ROTO-MIX
P.O. BOX 1724
3305 E. Wyatt Earp Blvd.
Dodge City, Kansas 67801
(620) 225-1142
SERIAL NUMBER ____________
441908 05/2007
1
Inhaltszusammenfassung zur Seite Nr. 2
524-15 TABLE OF CONTENTS PAGE NO. WARRANTY----------------------------------------------------------------------------------------- 3 SCALES WARRANTY & SERVICE POLICY ----------------------------------------------- 4 OPERATOR QUALIFICATIONS --------------------------------------------------------------- 5 SAFETY INFORMATION ---------------------------------------------------------------------- 6-20 CHAIN TENSION & LOADING INSTRUCTIONS-----------------------------------
Inhaltszusammenfassung zur Seite Nr. 3
WARRANTY ROTO-MIX LLC, warrants to the original purchaser all products manufactured by it to be free from defects in material and workmanship under normal use and service. ROTO-MIX’s obligation under this warranty is limited to repairing or replacing, as the company may elect, free of charge and without charge for installation, at the place of business of a dealer or distributor authorized to handle the equipment covered by this warranty or at a ROTO-MIX plant, any parts that prove, in t
Inhaltszusammenfassung zur Seite Nr. 4
SCALES WARRANTY & SERVICE POLICY DIGI-STAR SCALE SYSTEMS Digi-Star, LLC warrants for a period of one year from date of installation, to correct by repair or replacement, at Digi-Star’s option, any defect in material or workmanship in any part of this product. In the event of replacement, Digi-Star’s sole obligation shall be to provide replacement products or parts. F.O.B. Fort Atkinson, Wisconsin. EATON ELECTRONIC SCALES Eaton scale systems are warranted for two years from the dat
Inhaltszusammenfassung zur Seite Nr. 5
OPERATOR QUALIFICATIONS Operation Of this mixer/feeder shall be limited to competent and experienced persons. In addition, anyone who will operate or work around a mixer/feeder must use good common sense. In order to be qualified, he or she must also know and meet all other qualifications, such as: 1. Some regulations specify that no one under the age of sixteen (16) may operate power machinery. It is your responsibility to know what these regulations are in your area and/or situ
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY TAKE NOTE! THIS SAFETY ALERT SYMBOL FOUND THROUGHOUT THIS MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY AND THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH. THIS SYMBOL MEANS -ATTENTION! -BECOME ALERT! -YOUR SAFETY IS INVOLVED! SIGNAL WORDS: Note the use of the signal words DANGER, WARNING, and CAUTION with the safety messages. The appropriate signal word for each has been selected u
Inhaltszusammenfassung zur Seite Nr. 7
SAFETY FIRST REMEMBER: The careful operator is the best operator. Most accidents are caused by human error. Certain precautions must be observed to prevent the possibility of injury or death. DO NOT ALLOW PERSONNEL OTHER THAN THE QUALIFIED OPERATOR NEAR THE MACHINE. NEVER START MACHINE UNTIL ALL GUARDS AND SAFETY SHIELDS ARE IN PLACE. DO NOT CLEAN, ADJUST OR LUBRICATE THE MACHINE WHILE IT IS IN MOTION. BEFORE STARTING TRACTOR ENGINE, BE SURE PTO SHIELDS TURN FREELY.
Inhaltszusammenfassung zur Seite Nr. 8
SAFETY READ BEFORE YOU FEED EQUIPMENT SAFETY GUIDELINES Safety of the operator is one of the main concerns in designing and developing a new piece of equipment. Designers and manufactures build in as many safety features as possible. However, every year many accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment. You, the operator, can avoid many accidents by observing the following precautions in this section. To a
Inhaltszusammenfassung zur Seite Nr. 9
SAFETY READ BEFORE YOU FEED KEEP ALL SHIELDS IN PLACE Do not operate mixer/feeder without safety shields in place. Rotating parts can crush or dismember causing personal injury or death. Disconnect PTO driveline before removing shields for adjustment or service. OPERATE MIXER/FEEDER SAFELY Rotating parts can entangle or strike people, resulting in personal injury or death. Never enter a mixer/feeder while in operation. Operate the mixer/feeder from the operator’s
Inhaltszusammenfassung zur Seite Nr. 10
SAFETY READ BEFORE YOU FEED STAY CLEAR OF ROTATING DRIVELINES Entanglement in rotating driveline can cause serious injury or death. Keep tractor master shield and driveline shields in place at all times. Make sure rotating shields turn freely. Wear close fitting clothing. Stop the engine and be sure PTO driveline is stopped before making adjustments, connections, or cleaning out PTO driven equipment . PREVENT BATTERY EXPLOSIONS Keep sparks, lighted matches, and open flam
Inhaltszusammenfassung zur Seite Nr. 11
SAFETY READ BEFORE YOU FEED PREPARING TRACTOR FOR TRAILER MIXER POSITIONING DRAWBAR IMPORTANT: Drive components can be damaged from excessive speed. Under no circumstances should a feed mixer equipped with 540 RPM be operated by a tractor with 1000 RPM PTO. Feed mixers are available with either 540 or 1000 RPM driveline. Match tractor PTO with the feed mixer driveline. IMPORTANT: To prevent driveline damage, adjust tractor drawbar to recommended setting. Disengage tractor PT
Inhaltszusammenfassung zur Seite Nr. 12
SAFETY SIGNS 12
Inhaltszusammenfassung zur Seite Nr. 13
SAFETY SIGNS 13
Inhaltszusammenfassung zur Seite Nr. 14
SAFETY SIGNS 14
Inhaltszusammenfassung zur Seite Nr. 15
SAFETY READ BEFORE YOU FEED SAFETY DECAL CARE Keep safety decals and signs clean and legible at all times. Replace safety decals and signs that are missing or have become illegible. Replaced parts that displayed a safety sign should also display the current sign. Safety decals or signs are available from your dealer or the ROTO-MIX manufacturing plant. How to Install Safety Decals: Be sure that the installation area is clean and dry. Decide on the exact position before y
Inhaltszusammenfassung zur Seite Nr. 16
SAFETY READ BEFORE YOU FEED REMEMBER Your best assurance against accidents is a careful and responsible operator. If there is any portion of this manual or function you do not understand, contact your dealer or the ROTO-MIX plant. BEFORE OPERATION: Carefully study and understand this manual. Do not wear loose-fitting clothing which may catch in moving parts. Always wear protective clothing and substantial shoes. Keep wheel lug nuts or bolts tightened to specified torque. Assure tha
Inhaltszusammenfassung zur Seite Nr. 17
SAFETY READ BEFORE YOU FEED DURING OPERATION: Beware of bystanders, particularly children! Always look around to make sure that it is safe to start the engine of the towing vehicle or move the unit. This is particularly important with higher noise levels and quiet cabs, as you may not hear people shouting. NO PASSENGERS ALLOWED - Do not carry passengers anywhere on, or in, the tractor or equipment, except as required for operation. Keep hands and clothing clear of moving parts. Do no
Inhaltszusammenfassung zur Seite Nr. 18
SAFETY READ BEFORE YOU FEED DURING OPERATION (CONT.) Never leave running mixer/feeder unattended. As a precaution, always recheck the hardware on mixer/feeder following every 100 hours of operation. Correct all problems. Follow the maintenance safety procedures. FOLLOWING OPERATION: Following operation, or when unhitching, stop the tractor or towing vehicle, set the brakes, disengage the PTO and all power drives, shut off the engine and remove the ignition keys. Store the unit in an a
Inhaltszusammenfassung zur Seite Nr. 19
SAFETY READ BEFORE YOU FEED HIGHWAY AND TRANSPORT OPERATIONS (CONT.): Comply with state and local laws governing highway safety and movement of farm machinery on public roads. Use approved accessory lighting flags and necessary warning devices to protect operators of other vehicles on the highway during daylight and nighttime transport. The use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. Local laws should be checked for all hi
Inhaltszusammenfassung zur Seite Nr. 20
SAFETY READ BEFORE YOU FEED PERFORMING MAINTENANCE (CONT.): Always use the proper tools or equipment for the job at hand. Use extreme caution when making adjustments. Never use our hands to locate hydraulic leaks on attachments. Use a small piece of cardboard or wood. Hydraulic fluid escaping under pressure can penetrate the skin. When disconnecting hydraulic lines, shut off hydraulic supply and relieve all hydraulic pressure. Openings in the skin and minor cuts are susceptible to in
