Inhaltszusammenfassung zur Seite Nr. 1
OPERATION AND PARTS MANUAL
COLLOMIX
Hand Mixers
CX100HF
CX100HFE
CX300HF
CX400HFE
CX600HF
CX600HFE
Revision #3 (03/11/08)
To find the latest revision of this
publication, visit our website at:
www.multiquip.com
THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
Inhaltszusammenfassung zur Seite Nr. 2
CX-HF HAND MIXERS — SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give other materials can generate dust, mists and fumes off dust or mists containing crystalline silica. Silica is a containing chemicals known to cause serious or fatal basic component of sand, quartz, brick clay, granite a
Inhaltszusammenfassung zur Seite Nr. 3
CX-HF HAND MIXERS — TABLE OF CONTENTS Component Drawings STOW CX-HF SERIES Mixer Assembly (CX100) ................................... 18-21 HAND MIXERS Mixer Assembly (CX300) ................................... 22-25 Silicosis/Respiratory Warnings .................................. 2 Mixer Assembly (CX400) ................................... 26-29 Table Of Contents ..................................................... 3 Mixer Assembly (CX600) ................................... 30-33 Parts Ord
Inhaltszusammenfassung zur Seite Nr. 4
CX-HF SERIES HAND MIXERS — PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒❒❒ ❒ Dealer account number ❒ ❒❒❒ ❒ Dealer name and address ❒ ❒❒❒ ❒ Shipping address (if different than billing address) ❒ ❒❒❒ ❒ Return fax number ❒ ❒❒❒ ❒ Applicable model number ❒ ❒❒❒ ❒ Quantity, part number and description of each part ❒ ❒❒❒ ❒ Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day
Inhaltszusammenfassung zur Seite Nr. 5
CX-HF SERIES HAND MIXERS — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when Rotating Parts operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Manual has been developed NEVER operate equipment with covers or to provide complete instructions for guards removed. Keep fingers, hands, hair and the safe
Inhaltszusammenfassung zur Seite Nr. 6
CX-HF SERIES HAND MIXERS — RULES FOR SAFE OPERATION ■ Keep work area clean and well-lit. Keep area around the DANGER clear of obstructions which could cause persons to mixer fall onto moving parts. Dark and cluttered work areas can Failure to follow instructions in this manual may lead to cause accidents. serious injury or even death! This equipment is to be ■ NEVER operate the mixer in an explosive atmosphere such operated by trained and qualified personnel only! This as in the presence of f
Inhaltszusammenfassung zur Seite Nr. 7
CX-HF SERIES HAND MIXERS — RULES FOR SAFE OPERATION ■ DO NOT spray water onto electric motor. Do not expose Maintenance Safety equipment to rain or wet conditions. Water entering the ■ NEVER lubricate components or attempt service on a running equipment will increase the risk of electric shock. machine. ■ Double-insulated tools are equipped with a polarized plug ■ ALWAYS allow the machine a proper amount of time to cool (one blade is wider than the other). This plug will fit on a before servi
Inhaltszusammenfassung zur Seite Nr. 8
K E L T I S R CX-HF SERIES HAND MIXERS — SYMBOLS USED Some of the following symbols may be used on this equipment. Familiarize yourself with them and their meaning. Proper interpretation of these symbols will allow you to operate the equipment better and safer. Symbols Name Designation/Explanation A Amperes Current V Volts Voltage (potential) Hz Hertz Frequency (cycles per second) W Watt Power kg Kilograms Weight Minutes min Time S Seconds Time Diameter Size of mixer paddle n No load speed Rot
Inhaltszusammenfassung zur Seite Nr. 9
CX-HF SERIES HAND MIXERS — SPECIFICATIONS Table 1. CX-HF Series Specifications Model CF X100HF/CX100HFECE X300HCE X400HF CX600HF/CX600HF VV oltage 1V 10-120 V / 2301V 10-120 2V 30 110-120 V/230 W0 atts 80 00/1,00 80 0 10 ,40 1,400/1,60 H1 P 11 . 18 . 12 . 1.7/2. A4 mps 72 .2/4. 70 . 61 . 12.7/7. G1 ears 2 2 2 RPM Under Load 00 -790/0-670 00 -47 00 -50 0-490/0-42 Gear 1 RPM Under Load N0 /A 00 -89 00 -85 0-620/0-63 Gear 2 Recommended Mixing 4) .75 inches (120 mm)4) .75 inches (120 mm5) .5 inches
Inhaltszusammenfassung zur Seite Nr. 10
CX-HF SERIES HAND MIXERS — GENERAL INFORMATION Application Ensure that the extension cable is carefully laid out avoid- ing wet areas, sharp edges and locations where vehicles The Stow CX-HF Series Hand Mixers are designed for mixing might run over it. liquid and power-based products such as paints, mortar, adhesives, plaster, and similar substances used in the Unroll the extension cable fully or it will overheat and could building industry and building-related trades. catch fire. Make sure t
Inhaltszusammenfassung zur Seite Nr. 11
CX-HF SERIES HAND MIXERS — GENERAL INFORMATION Paddles The CX-HF Series Hand Mixers can use different paddles depending on the application it will be used for. See table below for the available paddles. Table 3. Paddles for CX-HF Series Mixers Mixer Mr odelDh iameteLe engtCs hucksiz Mixe Used With FM Series — Low Viscous Materials, Wallpaints, Lacquers (Material Flow: from top to the bottom) 3/4" and F" M120HF4" 3/4 23 1/4 6F 5 lb CX100H HEXAFIX® LX Series — Epoxy Resins, Adhesives & all liquid
Inhaltszusammenfassung zur Seite Nr. 12
CX-HF SERIES HAND MIXERS — COMPONENTS 1 2 4 3 6 5 7 8 9 Figure 1. Mixer Major Components 5. Gear Selection Lever — This lever is used to select the Refer to Figure 1 for the location of the following mixer gear (slow or fast) at which the unit is operating (not components. applicable on CX100HF/CX100HFE). 1. Ventilation Slits — These openings allow ventilation to 6. Protection Frame Fastening Screws — Holds the the unit to prevent overheating. protection frame securely in place. 2. Safety Loc
Inhaltszusammenfassung zur Seite Nr. 13
CX-HF SERIES HAND MIXERS — SETUP 2. A 120V/230V power supply can also be used. Make Assembly sure that the power supply conforms to the Before using the hand mixer, the following steps need to be specifications on the nameplate of the mixer. Voltage performed. decrease of more than 10% will cause loss of power and overheating. 1. Insert the mixing tools (see Table 3 for the different ® mixing tools/paddles available) into the HEXAFIX 3. Use an extension cord (see Table 2) of adequate current c
Inhaltszusammenfassung zur Seite Nr. 14
CX-HF SERIES HAND MIXERS — OPERATION 4. When submerging the mixing tool in the mixing material CAUTION or when lifting out the mixing tool, always reduce the speed. When the mixing tool is fully submerged, ALWAYS hold the machine with both hands while working. increase the speed again to ensure that the motor is adequately cooled. 1. To start , press the starting lockout button then press 5. During mixing, guide the mixer around the mixing the ON/OFF switch (Figure 4). The integrated electronic
Inhaltszusammenfassung zur Seite Nr. 15
CX-HF SERIES HAND MIXERS — MAINTENANCE Mixer Storage CAUTION For storage of the mixer for over 30 days, the following is ALWAYS disconnect the mixer from the power supply recommended: before cleaning, changing the mixing paddle or performing any maintenance. Clean the mixer and mixing tool. Cover the mixer and place it a clean dry area, that is CAUTION protected from harsh elements. To assure product safety and reliability, repairs, maintenance, and adjustments should be performed by an aut
Inhaltszusammenfassung zur Seite Nr. 16
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and QTY. Column remarks used in the Parts section of this manual. Use the help Numbers Used - Item quantity can be indicated by a numbers found on the back page of the manual if there are any number, a blank entry, or A/R. questions. A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length. The contents and part numbers listed in the parts section are subject to
Inhaltszusammenfassung zur Seite Nr. 17
CX-HF SERIES HAND MIXERS — SUGGESTED SPARE PARTS CX100HF/CX100HFE/CX300HF/CX300HFE/CX400HFE/CX600HF/CX600HFE (1 TO 4 UNITS) QTY. P/N DESCRIPTION 2 ......... CM20509 ....... SPRING FOR BRUSH ASSY (CX100, CX300, CX400) 1 ......... CM20567 ....... BRUSH SET (CX100, CX300, CX400) 2 ......... CM20569 ....... BRUSH HOLDER (CX600) 1 ......... CM20566 ....... BRUSH SET (CX600) 1 ......... CM20593 ....... SWITCH ASSY (CX100, CX300) 1 ......... CM20703 ....... SWITCH ASSY (CX400) 1 ......... CM20597 ...
Inhaltszusammenfassung zur Seite Nr. 18
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 64 73 76 23 24 1 6 76 32 73 4 73 59 85 12 61 57 15 62 38 42 60 80 36 70 7 39 10 3 82 72 29 71 71 5 50 55 58 11 2 116 70 70 117 70 100 70 70 116 70 30 118 31 119 9 120 PAGE 18 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV. #3 (03/11/08)
Inhaltszusammenfassung zur Seite Nr. 19
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. NO PART NO PART NAME QTY. REMARKS 1 CM20530 MOTOR HOUSING TOP 1 2 CM20531 MOTOR HOUSING BOTTOM 1 3 CM20560 GEAR HOUSING ASSY 1 4 CM20552 PLATE ASSY 1 5 CM20524 BAFFLE PLATE 1 6 CM20525 RECTIFIER 1 7 CM20527 AIR OUTLET 1 8 CM20601 COVER, TOP 1 9 CM20559 ARMATURE, OEM10 230V ................................. 1 ......... CX100HFE ONLY 9 CM20591 ARMATURE, OEM10 110V ................................. 1 ......... CX100HF ONLY 10 CM20556 FIELD COIL, OEM10/
Inhaltszusammenfassung zur Seite Nr. 20
CX100 HAND MIXER — MIXER ASSEMBLY MIXER ASSY. 70 8 37 68 64 73 76 23 24 1 6 76 32 73 4 73 59 85 12 61 57 15 62 38 42 60 80 36 70 7 39 10 3 82 72 29 71 71 5 50 55 58 11 2 116 70 70 117 70 100 70 70 116 70 30 118 31 119 9 120 PAGE 20 — CX-HF SERIES HAND MIXERS — OPERATION AND PARTS MANUAL — REV. #3 (03/11/08)
