Bedienungsanleitung Marshall electronic 990

Inhaltszusammenfassung zur Seite Nr. 1

Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
http://www.mxl-usb.com
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245 990 USB Stereo
http://www.mxl-usb.com
Manual
MXL USB.007 Mic Manual
Warranty
Stereo Gold Diaphragm
Marshall microphones are guaranteed against defects in material and workmanship for one year
from date of purchase. Should you encounter any problem with this unit, promptly contact the
USB Condenser Mic
company you purchased it from for

Inhaltszusammenfassung zur Seite Nr. 2

Congratulations on your purchase of the MXL 990 USB Stereo mic which uses 7. Then select the Audio/MIDI icon in the top row. From the drop down menu two gold diaphragm capsules in an X/Y pattern for stereo recording. MXL micro- under Audio Input, select the USB Audio Codec as shown in Figure #13 below. phones are the result of world-class engineering and manufacturing capabilities. They are designed to provide you with outstanding performance and exceptional value. While we encourage you to

Inhaltszusammenfassung zur Seite Nr. 3

Unpack Your Microphone Begin by examining the contents of your MXL USB kit. You should have the following components: • One MXL 990 USB Stereo microphone • A 10-foot USB 2.0 high speed cable • A desktop microphone stand plus the mounting ring • Owners manual • Microphone applications guide Getting Familiar With Your Microphone In addition to speaking or singing into the side of the microphone with the RED LED facing you, you should also understand the use of the three-position attenu- ati

Inhaltszusammenfassung zur Seite Nr. 4

3. While holding the microphone upright and firmly in one hand, secure the 7. By watching the movements of the Input level meter in this window, you can microphone to the desktop stand by screwing the black mounting ring into the now see that the MXL USB microphone is working as you speak into it. This microphone’s base. The microphone should now sit securely in the desktop stand. setting will be saved as the default input whenever the microphone is plugged in. 4. At this point, attach the en

Inhaltszusammenfassung zur Seite Nr. 5

4. Next, click on the Sound icon in the Hardware group as shown in Figure #8 below. 4. Select File - Properties. It should look like Figure #3. Figure #8 5. After opening the Sound dialog screen, there will be three tabs at the top of the window, select the Input tab by clicking on it. 6. Then select the USB Audio Codec as the device for sound input as shown in Figure #9 below. Figure #3 5. Click the Convert Now… button. It should look like Figure #4. Figure #9 Figure #4 www.mxl-usb.com 8 5

Inhaltszusammenfassung zur Seite Nr. 6

6. In the Attributes drop down Window, select 44.100 kHz, 16-Bit, Stereo as PLEASE NOTE: Each new recording made with this basic sound recording shown in Figure #5. utility will require you to re-select the 44.1 kHz sample rate. Sound Recorder defaults to the 8 kHz Mono setting, which produces unwanted noise. You are now ready to use the recording application of your choice. PLEASE NOTE: Professional recording applications typically default to the highest sample rate allowed by your computer