Inhaltszusammenfassung zur Seite Nr. 1
CRS-101
INFRARED WIRELESS MICROPHONE SYSTEM
INSTALLATION INSTRUCTIONS
Inhaltszusammenfassung zur Seite Nr. 2
This package contains the ff: 1 each . . . . . . . . . . CRS-CASE - MIXER/AMPLIFIER 2 each . . . . . . . . . . CRS-IRS - IR SENSORS 1 each . . . . . . . . . . CRS-PMIC - PENDANT MICROPHONE 1 each . . . . . . . . . . CRS-PENCH - PENDANT CHARGER 1 each . . . . . . . . . . CRS-PBAT3.7 - PENDANT MICROPHONE BATTERY 1 each . . . . . . . . . . CRS-LMIC - LAPEL MICROPHONE Optional Accessories (Sold Separately) 1 each . . . . . . . . . . CRS-HSMIC - HEADSET MICROPHONE
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INSTRUCTIONS Read all of these instructions before operating and save instructions for later use. 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the instructions should be adhered to. 4. Follow Instructions – All operating and u
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION Congratulations and thank you for purchasing the OWI CRS-101 Infrared Wireless Microphone System. This compact system is suitable for Classrooms, Training rooms, Conference rooms and for Public speaking. The CRS System is an Infrared (IR) Wireless system that allows the speaker the freedom to move about the room without the restriction of a microphone cable. The two included CRS-IRS IR Sensors allow use of several options of microphones. The CRS-CASE is an amplified audio
Inhaltszusammenfassung zur Seite Nr. 5
CRS-CASE FEATURES Figure 1. CRS-CASE Top View - Door Closed CRS-CASE CABINET FEATURES 1. DOOR LOCK – Locks the CRS-CASE Door to keep unauthorized fingers off the system controls and settings. Also allows safe storage of the Pendant, Headset and Lapel Microphones. Figure 2. CRS-CASE Bottom View 2. MOUNTING KEYHOLES – Two screw keyholes for securing the CRS-CASE to a wall or shelf. 5
Inhaltszusammenfassung zur Seite Nr. 6
Figure 3. CRS-CASE Front Panel CRS-CASE FRONT PANEL FEATURES The CRS-CASE Front Panel features all of the controls for the CRS-101 System. 3. POWER SWITCH – One, two position toggle switch turns the power mains to the CRS-CASE ON/OFF. 4. STORAGE SPACE – Internal compartment allows safe storage of the Pendant, Headset and Lapel Microphones. 5. WIRE ACCESS – Space in the CRS-CASE cabinet allows connection to an external audio source and two wired microphones, with the door closed.
Inhaltszusammenfassung zur Seite Nr. 7
Figure 4. CRS-CASE Inside Panel CRS-CASE INSIDE PANEL FEATURES An external audio source such as a CD/DVD Player, computer, projector, cable, satellite, etc and standard unbalanced, low impedance wired microphones can be connected to the Inside Panel. 11. LINE IN – Two, RCA Jacks connect to the L & R line-level audio outputs on a stereo audio source. NOTE: The CRS will output BOTH channels to BOTH Speakers (mono). Use either channel for a mono source. 12. TV/DVD – One, mono ¼” phone
Inhaltszusammenfassung zur Seite Nr. 8
Figure 6. CRS-CASE Bottom Side Panel CRS-CASE BOTTOM SIDE PANEL FEATURES 17. AC POWER CORD – One, three prong AC cord connects to a standard 110VAC/60Hz outlet. Provides AC power to the CRS-101. Figure 7. CRS-IRS IR Sensor CRS-IRS IR SENSOR FEATURES 18. MINI PLUG – One, 3.5mm mini plug connects to one of the three IR Sensor Jacks on the CRS- CASE Side Panel. 19. CABLE – 50’ cable allows the IR Sensors to be positioned away from the CRS-CASE for optimum coverage for rece
Inhaltszusammenfassung zur Seite Nr. 9
Figure 8. CRS-HHMIC Hand Held Microphone (Optional) CRS-HHMIC HAND HELD MICROPHONE FEATURES (Optional) The HHMIC Hand Held Microphone is an optional accessory that can be used for presentations or can be passed around the room for Q&A so everyone in the room can clearly hear questions from the class or audience. NOTE 1: The CRS-HHMIC is an optional accessory and must be purchased separate from the CRS-101. NOTE 2: The CRS-HHMCS Charger is also an optional accessory and is pur
Inhaltszusammenfassung zur Seite Nr. 10
Figure 9. CRS-PMIC Pendant Mic/Charger CRS-PMIC PENDANT MIC/CHARGER FEATURES The CRS-PMIC Pendant Microphone can be used as a wireless microphone itself or as an IR Transmitter when used with the Lapel or Headset Mics. 26. MIC INPUT – One, 3.5mm mini jack connects to the mini plug on either the CRS Lapel Mic or Headset Mic. When either is connected to this jack, it overrides the Pendant Microphone, so only the Lapel Mic or Headset Mic will be active. 27. CLIP – Clips the Pendant Mic
Inhaltszusammenfassung zur Seite Nr. 11
Figure 10. CRS-LMIC Lapel Mic CRS-LMIC LAPEL MIC FEATURES The CRS-LMIC Lapel Microphone is used with the Pendant Mic for inconspicuous hands-free presentations. 34. MICROPHONE – Detects audible sound such as voice. Should be positioned as close to the speaker’s mouth as possible. 35. LAPEL CLIP – Attaches the Lapel Microphone to a jacket lapel, shirt or blouse. 36. MINI PLUG - Connects to the MIC Input on the CRS-PMIC Pendant. High output IR LED’s on the Pendant output audio as inf
Inhaltszusammenfassung zur Seite Nr. 12
Figure 11. CRS-HSMIC Headset Mic (Optional) CRS-HSMIC HEADSET MIC FEATURES (Optional) The CRS-HSMIC Lapel Microphone is used with the Pendant Mic and is another option for hands-free presentations. NOTE: The CRS-HSMIC is an optional accessory and must be purchased separate from the CRS-101. 37. MICROPHONE – Detects audible sound such as voice. Should be positioned as close to the speaker’s mouth as possible. 38. MIC BOOM – Adjustable mic boom allows the microphone to be set to
Inhaltszusammenfassung zur Seite Nr. 13
Figure 12. Typical Classroom Application INSTALLATION CRS-CASE The CRS-CASE can be wall or shelf mounted. It should be located in a central location that allows the IR Sensors to be equally spread in the classroom for optimum visibility to the microphones. Consideration should also be given to locating the CRS-CASE in close proximity to any audio source that will be connected to the Line In, such as a CD/DVD Player, Projector, Computer, VCR, Cable, Satellite, etc. It should be
Inhaltszusammenfassung zur Seite Nr. 14
Wall Mount The CRS-CASE has two screw keyholes on the Bottom Panel that allow it to be secured to a wall or cabinet. (Figure 2) Whenever possible, the screws for the keyholes should be secured to a wood panel instead of drywall to avoid having the screws work loose over time after repeated use of the CRS. If use of a wood panel is not possible or desirable, use screw anchors to secure the mounting screws to the drywall. There is an additional, smaller screw hole in the CRS-CASE Storage Sp
Inhaltszusammenfassung zur Seite Nr. 15
Figure 14. Typical CRS System Connections CONNECTIONS The CRS-101 System requires only a few simple connections and sets up in minutes. The only required connections are the IR Sensors, Speakers and Power Cord. Connecting an optional audio source such as a CD/DVD Player, VCR, Computer, Projector, Cable, Satellite, etc is also simple using standard RCA- RCA audio patch cables. IR Sensors 1. Connect the CRS-IRS IR Sensor mini plugs to any two of the three IR Sensor Inputs on the CRS-
Inhaltszusammenfassung zur Seite Nr. 16
Line In 1. Connect the left and right line level audio outputs of an audio source to the L and R Inputs on the CRS-CASE using a stereo RCA-RCA patch cable with gold ends. NOTE: Though the CRS has Left and Right Inputs, the Speaker Outputs are mono, so BOTH channels will be output from BOTH speakers. 2. Feed the audio patch cable through the Wire Access in the CRS-CASE Cabinet to allow connection with the door closed. TV/DVD 1. Connect the left and right line level outputs of a TV/Proje
Inhaltszusammenfassung zur Seite Nr. 17
OPERATION 1. IF TURNING THE SYSTEM ON FOR THE FIRST TIME, turn the VOL Knobs all the way down (full counterclockwise). 2. With all system connections confirmed, press the Power Switch to turn the system ON. 3. If using the Lapel or Headset Mic, connect to the Pendant as shown in Figure 16. Be sure the Pendant is pointing toward the IR Sensors so the IR Pulses from the Pendant will be ‘seen’ by the IR Sensors. 4. Turn the Hand Held Microphone (or Pendant) ON. 5. Set the MAIN VOL Knob on t
Inhaltszusammenfassung zur Seite Nr. 18
SPECIFICATIONS CRS-CASE MIXER/AMPLIFIER IR Carrier Frequency 2.06MHz and 2.56MHz Deviation Range ± 40kHz Input Sensitivity LINE 150mV TV/DVD (Unbalanced Line Mono) 150mV COMP (Unbalanced Line Mono) 150mV Signal to Noise LINE ≥70dB TV/DVD (Unbalanced Line Mono) ≥70dB COMP (Unbalanced Line Mono) ≥70dB WIRELESS MIC ≥100dB THD <0.5% @ 1KHz Frequency Response 60Hz-14KHz ±3dB Output Power 2-30W (Max) Voltage 110V AC / 60Hz Input Impedance LINE 47 K Ω
Inhaltszusammenfassung zur Seite Nr. 19
CRS-PMIC PENDANT MICROPHONE Polar Pattern Unidirectional Electret Condenser Microphone IR Carrier Frequency 2.06MHz or 2.56MHz Battery 3.7V 800MAh AA Lithium Dimensions H x W x D 4.7 x 1.3 x 0.7 inches (120 x 34 x 18 mm) Weight (with battery) 0.13lbs (.57kg) CRS-PENCH PENDANT CHARGER Input Voltage 110V AC / 60Hz Output Voltage 6V DC Output Current 1000mA CRS-LMIC LAPEL MICROPHONE Pattern Cardioid Directional Frequency Response 55Hz-17KHz ± 2dB Sensitivi
Inhaltszusammenfassung zur Seite Nr. 20
Battery Current/Life 0.1mA @ 5V Voltage 2.5-11V DC Cable Length 40 inches (1.016m) Weight 0.04 lbs (0.02kg) Dimensions Headset 6.1 inches (155 mm) Microphone 0.20 inches (5.1 mm) Body 6.7 inches (170 mm) Accessory HM-008 Windscreen CRS-HHMIC HANDHELD MICROPHONE Polar Pattern Uni-directional Dynamic Carrier Frequency 2.06MHz and 2.56MHz Battery 2.4V NiMH 2400MAh approx 7 hours (low output); 4 Hours (high output) Dimensions 1.9 x 9.5 inches (50 x 240mm)
