Bedienungsanleitung Newcon Optik BINOCULAR SIB 16X40 WP

Inhaltszusammenfassung zur Seite Nr. 1

Operation Manual





























SIB 16x40 WP


WATERPROOF BINOCULAR

WITH GYRO IMAGE STABILIZATION


NEWCON ™ 2010 Printed in Canada

105 Sparks Ave, Toronto, ON M2H 2S5 Canada

Inhaltszusammenfassung zur Seite Nr. 2

10. QUALITY CERTIFICATE IMPORTANT INFORMATION The SIB 16x40 WP has passed the quality inspection. Read prior to activation You have just purchased a complicated electronic device. To Production date ____________________________ operate it properly, please read this manual carefully. Here are some common precautions that must be noted. Serial number ______________________________ • NEVER switch to the stabilization mode while the power Quality Inspector signature _______

Inhaltszusammenfassung zur Seite Nr. 3

Features of the SIB 16x40WP Gyro binocular 9. CUSTOMER SUPPORT • Stabilized image • Rigid construction Should you experience any difficulties with your Newcon • Waterproof OPTIK product, consult the enclosed manual. If the problem • Surveillance in moving environment remains unresolved, contact our customer support department at • Alternative external power supply (416) 663-6963 or Toll free at 1-877-368-6666. Our operating hours are 9am-5pm, Monday - Friday, Standard East T

Inhaltszusammenfassung zur Seite Nr. 4

CAREFULLY READ ALL THE INSTRUCTIONS BEFORE USE! 8. WARRANTY FAILURE TO OBEY THE INSTRUCTIONS WILL VOID THE WARRANTY! NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 1. BRIEF DESCRIPTION months from the date of manufacturing. Should your Newcon SIB 16x40WP Gyro Stabilizing Binoculars is an ultimate product prove defective during this period, please bring

Inhaltszusammenfassung zur Seite Nr. 5

7. TROUBLESHOOTING 2. APPEARANCE AND CONTROLS The stabilization mode does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image. Turning the eyepieces (2), adjust to achieve the clearest image on the screen. If the view still does not seem in focus, clean the lenses. They could be foggy

Inhaltszusammenfassung zur Seite Nr. 6

- Prepare fresh silica gel. You should replace the powder 3. TECHNICAL CHARACTERISTICS indoors or, if in the field, in dry windless weather only. - Unscrew the desiccant compartment cap with the supplied Magnification 16x wrench. Angular field of view, no less 3° - Pour the wet silica gel out off the compartment and fill it Exit pupil diameter, mm 2.5 with fresh one. Close the cap. The wet silica gel may be regenerated. To dry it, place the silica Minimum focus, m 30 gel int

Inhaltszusammenfassung zur Seite Nr. 7

4. SUPPLIED ACCESSORIES Precautions: SIB 16x40 WP is a sophisticated precision optical instrument equipped with electronics. Therefore, it should be handled SIB 16x40 WP is supplied in the following assembly: with due care. - Device 1 pc. • Keep your device away from direct sunlight, impacts, dust, - Objective lens caps 2 pc. moisture, and sudden changes of temperatures. o o • Do not keep the device at temperatures higher than 50 C (122 F). - Carrying case 1 pc. • Do not touch

Inhaltszusammenfassung zur Seite Nr. 8

5.2. Operation with image stabilization ATTENTION! It is not allowed to engage the stabilizing mode - Extract the battery cartridge. To do this, rotate the of the device when the power supply control compartment cover (1) counterclockwise at quarter of the indicator is not glowing, or in less than a minute circle. The battery cartridge turns loose and can be extracted after device has been turned ON. easily from the body of the unit. Note: Don’t apply extra strength to the han