Inhaltszusammenfassung zur Seite Nr. 1
GPS105
Operating Manual
&
Quick Start
Guide
GPS Transceiver
with an
Integrated
UHF Radio
To bring outstanding wireless communication products
to people's lives throughout the world.
Inhaltszusammenfassung zur Seite Nr. 2
WARNINGS & NOTIFICATIONS When using the GPS105 in a motor vehicle it is the user's responsibility to ensure operating the GPS105 does not detract from the safe operation of the vehicle. For safety reasons it is not recommended that a driver change any settings while in motion. Please come to a complete stop or have a passenger make changes if necessary. The latitude, longitude, and altitude indications on the display are based on WGS-84 Datum, and the altitude indication may not appear depending
Inhaltszusammenfassung zur Seite Nr. 3
Quick Start Guide The Quick Start Guide pages are designed to allow you to install and operate your GPS105 as quickly as possible, however it does not attempt to explain any of the advanced features of the GPS105 unit. INSTALLING YOUR GPS105 Please consider the following before installing. The GPS105 is designed to fit into a standard car stereo (DIN) fitting. You may also use the supplied bracket & fasteners to mount the GPS105 in other locations. The GPS105 uses a UHF antenna and a GPS interna
Inhaltszusammenfassung zur Seite Nr. 4
2 CONNECTING YOUR GPS105 EXTERNAL SPEAKER JACK BACK PANEL UHF ANTENNA CONNECTOR GPS ANTENNA CONNECTOR DC POWER CORD Microphone Socket i. Remove fuse from fuse holder along power lead. ii. Connect 13.8V supply to the power lead making sure positive is applied to the red wire and ground to the black wire. iii. Connect the UHF Antenna with PL259 fitting (not included). iv. Connect the GPS Internal Antenna. v. Make sure the Power Switch knob is OFF (see Controls page 4). vi. Re-insert the fuse into
Inhaltszusammenfassung zur Seite Nr. 5
3 TEST FOR A GPS SIGNAL i. Turn the GPS105 ON. ii. The Welcome display will appear. SEARCHING SEARCHING FOR FOR INSTANT iii. After 3 seconds the initial display will switch to the UHF-CB display. iv. At the top of the display the unit will indicate it is searching for satellite information. Make sure the GPS antenna has an unobstructed view of the sky. For the initial power up it may take up to 15 minutes to secure satellite information. When satellite data has been retrieved 'SEARCHING FOR SATE
Inhaltszusammenfassung zur Seite Nr. 6
4 SETTING USER NAME You may personalize your GPS105 by setting a User name which will appear at the top of the display. The User name also forms part of your call ID when communicating to radios using similar technology (GPS105 or GPS205) on channel 22 or 23. To set your Username: MENU i. Press & hold to bring up the menu list. ii. Press and scroll down until USER NAME is highlighted. ENT iii. Press . iv. Enter Name: Press or to select desired character. Press or to move to previous or next char
Inhaltszusammenfassung zur Seite Nr. 7
5 SEND POSITION ON The SEND POSITION function enables the GPS105 to transmit your User name and position on channels 22 and 23. The factory setting for this feature is OFF. Current regulations permit enabling the SEND POSITION function to operate on Channels 22 and 23 only. The SEND POSITION will be OFF from the factory. To turn SEND POSITION ON: MENU i. Press & hold to bring up the menu list. ii. Scroll to highlight SENDPOSITION. iii. Press ENT . iv. Press to select ON. v. Press to confirm sett
Inhaltszusammenfassung zur Seite Nr. 8
CONTENTS Warnings & Notifications...................................................................................................................................................i Quick Start Guide.............................................................................................................................................................ii Installing Your GPS105.......................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 9
CONTENTS GPS Operation...........................................................................................................................................................13 Speed Warning............................................................................................................................................13 Early Warning Safety Alerts...........................................................................................................................14 Warning Vol
Inhaltszusammenfassung zur Seite Nr. 10
INTRODUCTION The Uniden GPS105 is designed to provide you with years of trouble free service. It's rugged components and materials are capable of withstanding harsh environments. We are certain that you will enjoy your GPS105. Please read this operating Manual carefully to ensure you gain the optimum performance of the unit. FEATURES Backlit LCD Display Key Beep ON/OFF GPS FUNCTIONS Navigation to pre-programmed Australian and New Zealand cities and suburbs Mark and delete up to 500 of yo
Inhaltszusammenfassung zur Seite Nr. 11
CONTROLS 6 5 GPS105 3 1 2 4 10 7 8 9 1. LCD Display SCAN 2. /MEM - Scan Key/Memory Key 3. NAVI - Navigation Key 4. VOL/SQ - Centre Knob (Power-VOLUME): Turns the Power ON/OFF and adjusts the Volume. Outer Ring (SQUELCH): Adjusts the Squelch 5. PTT - Push to Talk(PTT) switch 6. Channel Instant - Instant Channel switch 7. Speaker DISP 8. /MENU/ - Display key/ Menu key/ Back to previous Display key ENT 9. /MARK/ - Enter key/ Mark key/ Move to next Display key 10. SCROLL - up, down, left, right keys
Inhaltszusammenfassung zur Seite Nr. 12
INDICATORS 12 13 11 14 15 16 17 18 20 19 UHF-CB Display 11 GPS - GPS status icon 16 MEMORY icon 12 USER NAME - An example (MICHAEL) is shown 17 CTCSS icon 13 BUSY - Receive icon 18 SCAN icon 14 INSTANT - Channel Instant icon 19 CTCSS Channel indicator 15 DUPLEX icon 20 Channel indicator 5
Inhaltszusammenfassung zur Seite Nr. 13
INCLUDED WITH YOUR GPS105 GPS105 Owners Manual Microphone Mounting Bracket, Knobs, Microphone Hanger Screws Rubber washer, Washer Stars and washers and Screws. DC Power Cord with fuse GPS Internal Antenna If any of these items are missing from the box, contact your dealer immediately. 6 Manual Quick Start Guide GPS Transceiver with Integrated UHF Radio GPS105 Operating & an
Inhaltszusammenfassung zur Seite Nr. 14
UHF CB - OPERATION All UHF-CB functions are only available when in UHF-CB mode. SETTING THE SQUELCH 1. To turn the unit ON, rotate VOL knob clockwise. Adjust volume to a comfortable level. 2. Think of the Squelch control as a gate. If you turn SQUELCH fully clockwise it raises the "Squelch Gate" so that no signals get through. 3. If you turn the SQUELCH fully counter clockwise, it lowers the "Squelch Gate" so that everything gets through - noise, weak signals and strong signals. 4. To set the "S
Inhaltszusammenfassung zur Seite Nr. 15
UHF CB - OPERATION SELECTING A CHANNEL The GPS 105 uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed on page 26. To select a desired channel in UHF-CB Mode: 1. Press or momentarily to step up or down a channel. 2. Press and hold or to rapidly step up or down channels. TO TRANSMIT AND RECEIVE 1. Before you transmit, listen for activity on the selected channel. 2. When the channel is clear, press and hold the PTT to transmit.
Inhaltszusammenfassung zur Seite Nr. 16
UHF CB - OPERATION TO OPERATE IN DUPLEX MODE (REPEATERS) The Duplex function enables you to access local repeater stations. You can only activate Duplex from CH01-CH08. UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions. Contact a retailer for a list of repeaters available in your area. Operation with the aid of a Repeater To turn DUPLEX ON/OFF: 1. Select the channel of the rep
Inhaltszusammenfassung zur Seite Nr. 17
UHF CB - OPERATION SCANNING with PRIORITY CHANNEL The scan function scans channels that are in the scan memory and stops at an active channel. Whichever channel you have selected when SCAN begins becomes the Priority Channel. SCAN will check the priority channel every 1.5 seconds. To initiate scanning: 1. Press SCAN momentarily to begin scanning. The SCAN icon flashes on the display. 2. Press PTT, INSTANT or any function key to cancel SCAN. If SCAN is cancelled while stopped on a busy channel th
Inhaltszusammenfassung zur Seite Nr. 18
UHF CB - OPERATION INSTANT CHANNEL The Instant Channel feature enables a chosen channel to be called at the press of a button. Only one channel at a time is designated as the Instant Channel. To register or change the Instant channel: 1. Select a channel using scroll or . 2. Press and hold the Instant Channel button. 'INSTANT' will appear on the UHF-CB display for the channel selected. To use Instant Channel: Press the Instant Channel button momentarily when in the UHF-CB mode to instantly chang
Inhaltszusammenfassung zur Seite Nr. 19
UHF CB - OPERATION KEY BEEP ON/OFF Your radio emits a beep each time one of the keys (except for the PTT button) is pressed. To turn Key Beep ON/OFF: 1. Press & hold MENU . 2. Scroll to highlight KEY BEEP. 3. Press ENT . 4. Press or to select ON or OFF. 5. Press ENT to confirm. ROGER BEEP Roger Beep is a BEEP that is sent to notify the end of transmission. Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if Key Beep is turned off. However, Roger Bee
Inhaltszusammenfassung zur Seite Nr. 20
GPS OPERATION The GPS antenna must have an unobstructed view of the sky for the GPS105 to retrieve satellite data which is used for the GPS features described on pages 13 to 25. Current regulations permit the SEND POSITION to operate on Channels 22 and 23 only. To comply with current regulations, Uniden recommends not to transmit data more than 10 times within an hour on channels 22 and 23. SPEED WARNING OPERATION FLOW Press & hold ENT ENT SPEEDWARNING MENU If the current speed that the GPS105 i
