Inhaltszusammenfassung zur Seite Nr. 1
IC Recorder
Operating Instructions
ICD-SX25/SX35/SX45/SX55
© 2004 Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
For the customers in the United States Owner’s Record The model number is located at the rear panel and the serial number is located inside the battery compartment. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. ICD-SX25/SX35/SX45/SX55 Serial No. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules
Inhaltszusammenfassung zur Seite Nr. 3
Notice for users Program © 1999, 2000, 2001, 2002, 2003, 2004 Sony Corporation Documentation ©2004 Sony Corporation All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Getting Started Step 1: Installing the Batteries ............................................................................. 6 Replacing the Batteries ................................................................................. 7 Step 2: Setting the Clock ...................................................................................... 8 Basic Operations Recording Messages ............................................................................................
Inhaltszusammenfassung zur Seite Nr. 5
Editing Messages Adding a Recording ............................................................................................ 34 Adding a Recording to a Previously Recorded Message ...................... 34 Adding an Overwrite Recording during Playback ................................ 35 Erasing Messages ................................................................................................ 36 Erasing Messages one by one ...............................................................
Inhaltszusammenfassung zur Seite Nr. 6
BGetting Started Step 1: Installing the Batteries 1 Slide and lift the battery compartment lid. 2 Insert two LR03 (size AAA) alkaline batteries with correct polarity, and close the lid. If the battery compartment lid is accidentally detached, attach it as illustrated. Clock setting display appears when you insert batteries for the first time, or when you insert batteries after the unit has been without batteries for a certain period of time. Please refer to steps 3 to 6 in “Step 2: Setting the
Inhaltszusammenfassung zur Seite Nr. 7
Getting Started Replacing the Batteries The battery indicator on the display window shows the battery condition. Notes • Do not use manganese batteries for this unit. • When you replace the batteries, insert the new ones within 3 minutes after you remove the exhausted ones. Otherwise, the display may show the clock setting display or incorrect date and time when you re-insert the batteries. In this case, set the date and time again. The recorded messages and alarm setting, however, will remain.
Inhaltszusammenfassung zur Seite Nr. 8
Step 2: Setting the Clock You need to set the clock to use the alarm function or record the date and time. Clock setting display appears when you insert batteries for the first time, or when you insert batteries after the unit has been without batteries for a certain period of time. In this case, proceed from step 4. Jog lever Press up (>). Turn toward MENU. Press the center (x•B). Press down (.). 1 Turn the jog lever toward MENU. The menu mode will be displayed in the display window. 2 Press
Inhaltszusammenfassung zur Seite Nr. 9
Getting Started 2 Press the jog lever (x•B). The month digits will flash. 3 Set the month and day in sequence, then press the jog lever (x•B). The hour digits will flash. v 5 Set the time. 1 Press the jog lever up or down (>/.) to select the digits of the hour. 2 Press the jog lever (x•B). The minute digits will flash. 3 Set the minute. 4 Press the jog lever (x•B). The menu mode will be displayed again. Note If you do not press the jog lever (x•B) for more than one minute, the clock setting mode
Inhaltszusammenfassung zur Seite Nr. 10
BBasic Operations Recording Messages You can record the maximum of 99 messages in each of the three (A, B, and C) folders. You can record messages in the following three ways: • Add a recording behind the last recorded message • Add a recording to a previously recorded message (page 34) • Add an overwrite recording (page 35) This section explains how to add a recording behind the last recorded message. Message 1 Message 2 Message 3 Blank space When you record a new message. .. Message 1 Messag
Inhaltszusammenfassung zur Seite Nr. 11
Basic Operations Select the folder. 1 Turn the jog lever toward FOLDER repeatedly to display the folder (A, B, or C) in which you wish to record messages. Selected folder Start recording. 2 1 Press zREC/REC PAUSE button. Built-in You do not need to keep pressing microphone z z z z zREC/REC PAUSE while recording. 2 Speak into the built-in microphone. Remaining memory Recording mode indication OPR indicator Microphone (lights in red during Current message sensitivity recording**) number Counter di
Inhaltszusammenfassung zur Seite Nr. 12
Recording Messages (continued) Stop recording. 3 Press x x x x xSTOP. The unit stops at the beginning of the current recording. If you do not change the folder after you stop recording, the next time you record you will record in the same folder. Other operations To Do this pause recording* Press zREC/REC PAUSE. During recording pause, the OPR indicator flashes in red and “PAUSE” flashes in the display window. release pause and Press zREC/REC PAUSE again. resume recording Recording resumes from
Inhaltszusammenfassung zur Seite Nr. 13
Basic Operations Tips for Using the Built-in Microphone Recording a sound centering on a specific direction To record a sound centering on a specific direction, slide the DIRECTNL switch to “ON” position. When you record a sound at a conference/meeting or in a spacious place etc., use this setting. Note The DIRECTNL switch functions only in the “SP” or DIRECTNL “LP” recording mode. In the ST or STLP modes where the high-performance sound reproduction is important, sound is recorded in the stere
Inhaltszusammenfassung zur Seite Nr. 14
Recording Messages (continued) Using Convenient Functions while Recording Monitoring the recording When recording from the built-in microphone, you connect headphones supplied or not supplied to the i (headphones) jack and monitor the recording from the connected headphones. You can adjust the volume with VOL +/–, but the recording level is fixed. Note If you turn up the volume excessively or place the headphones near the microphone while monitoring recording, the microphone may pick up the soun
Inhaltszusammenfassung zur Seite Nr. 15
Basic Operations Memory remain indication During recording, the remaining memory indicator decreases one by one. When the remaining recording time reaches 5 minutes, the remaining memory indication flashes. When the remaining time reaches 1 minute, the remaining memory indication will flash in the display window regardless of the display mode (page 26). When the memory is full, recording automatically stops and “FULL” will be displayed with an alarm sound. To continue recording, first erase some
Inhaltszusammenfassung zur Seite Nr. 16
Recording with an External Microphone or Other Equipment You can record sound of an external microphone or other equipment (tape recorder, MiniDisc player, or etc.) with the IC recorder. Depending on the device you use, connect the IC recorder as follows. For available accessories, consult with your nearest Sony dealer. Recording with an External Microphone Connect an external microphone to the m (microphone) jack. When you connect an external mini-plug (stereo) microphone, the built-in micro
Inhaltszusammenfassung zur Seite Nr. 17
Basic Operations Recording with Other Equipment To record the sound of the IC recorder with other equipment, connect the i (headphones) jack of the IC recorder to the audio input connector (minijack, stereo) of other equipment. mini-plug (stereo) Tape recorder, etc. mini-plug (stereo) GB 17
Inhaltszusammenfassung zur Seite Nr. 18
Playing Back Messages When playing back a previously recorded message, start from step 1. When playing back a message you have just finished recording, start from step 3. Select the folder. 1 Turn the jog lever toward FOLDER repeatedly to display the folder (A, B, or C) in which you wish to play messages. Selected folder Select the message number. 2 Press the jog lever up or down (>/.) to display the desired message number. • Press up (>): for next message number. • Press down (.): for previous
Inhaltszusammenfassung zur Seite Nr. 19
Basic Operations Start playback. 3 i (headphones) jack 1 Press the jog lever (x•B). Counter display* 2 Adjust the volume with VOL +/– . * The display selected with the DISP in the menu (page 26) appears. OPR indicator **When the LED in the menu is set to “OFF”, the OPR (lights in green during indicator turns off (page 49). playback**) After playing back one message, the unit stops at the beginning of the next message. When the last message in a folder has been played back, the unit stops at the
Inhaltszusammenfassung zur Seite Nr. 20
Playing Back Messages (continued) Other operations To Do this stop at the current position Press xSTOP or the jog lever (x•B). (Playback Pause function) To resume playback from that point, press the jog lever (x•B) again. go back to the beginning Press the jog lever down (.) of the current message* once.** go back to previous Press the jog lever down (.) messages repeatedly. (During stop mode, keep the jog lever pressed to go back the messages continuously.) skip to the next message* Press the
