Bedienungsanleitung Hobie Twist-and-Stow

Inhaltszusammenfassung zur Seite Nr. 1

The Twist-and-Stow Rudder System Patent Pending
Twist-and-Stow Rudder Features
The Twist-and-Stow rudder system comes pre-installed and
The left steering control line
adjusted from our factory. With extensive use, the rudder
passes up through the hole in
system may need to be adjusted. The following information
the hex head bolt.
is intended to familiarize you with the rudder and how it
works.
The left steer-
These bolts give you the ability
ing control line
to change between a larger or
is

Inhaltszusammenfassung zur Seite Nr. 2

Up/Down Control Assembly Pull more of this line to The following is a detail of how the up/down rud- get more DOWN tension. der control is set up inside the kayak. Up/Down Handle A Bungee cord fits is attached to the down control line and fits The down control around the control arm post. line passes around Pull more of this line to get the block mounted Control Arm more UP tension. on the inside of the hull Up Control Line Down Control Line Pull more of this line and wrap it around the Steer