Inhaltszusammenfassung zur Seite Nr. 1
USER’S MANUAL
SMOOTH AGILE DMT X2
USER WEIGHT LIMITATION: 350lbs(160kgs).
SERIAL NUMBER (found on frame):
ST-MNL-X2-SMUS-01
Inhaltszusammenfassung zur Seite Nr. 2
2 SMOOTH AGILE DMT X2 PREASSEMBLY For future service or related questions: Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth Fitness AGILE DMT X2. Name: ______________________________ Phone Number: ___________________ Receipt: ______________________ Open the boxes: You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the boxes. Check the
Inhaltszusammenfassung zur Seite Nr. 3
3 www.smoothfitness.com POWER REQUIREMENTS Power Requirements: IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN. This AGILE Trainer can be seriously damaged by sudden voltage
Inhaltszusammenfassung zur Seite Nr. 4
4 SMOOTH AGILE DMT X2 SUPPLIED COMPONENTS This list identifies the major components you will use to assemble this product. No. Description Qty. A3 A2 A1 A1 Handlebar Assembly – Left 1 A2 Console Assembly 1 A3 Handlebar Assembly – Right 1 A4 Main Frame Assembly 1 A5 Incline Frame Assembly 1 A6 Computer Assembly 1 701 Action Handlebar Lower Cover 4 A5 A6 A4 702 Pedal Arm Front Pivot Cover 2 703 Incline Frame Cover 1 704 Undercarriage Cover - Left 1 705 Undercarriage Cover -
Inhaltszusammenfassung zur Seite Nr. 5
5 www.smoothfitness.com SUPPLIED HARDWARE This list identifies the hardware you will use to assemble the product. To help distinguish between the various types of screws and bolts, use the scale below to measure them and compare them to the sizes listed. No. Description Qty. 501 502 503 504 505 501 4 x 12mm Screw – Cone Point 4 502 15 x 22 – M8 x 10mm Bolt 2 503 15 x 26 – M8 x 15mm Bolt 2 507 510 506 508 509 511 504 M8 x 16mm Allen Head CAP Bolt 4 505 20 x 78 – M14 x 35mm Bo
Inhaltszusammenfassung zur Seite Nr. 6
6 SMOOTH AGILE DMT X2 COMPLETE PARTS LIST Item No. Description Qty. Part No. 100 101 Console Support Tube 1 X2-101 102 Action Handlebar – Left 1 X2-102 103 Action Handlebar – Right 1 X2-103 104 Moving Linkage – Left 1 X2-104 105 Moving Linkage – Right 1 X2-105 106 Pedal Arm – Left 1 X2-106 107 Pedal Arm – Right 1 X2-107 108 Pedal Swing Arm 2 X2-108 109 Incline Frame 1 X2-109 110 Incline Transmission Tube-Front 1 X2-110 111 Incline Transmission Tube-Back 1 X2-111 112
Inhaltszusammenfassung zur Seite Nr. 7
7 www.smoothfitness.com COMPLETE PARTS LIST Item No. Description Qty. Part No. 226 Crank 2 X2-226 227 Crank Disk 1 X2-227 228 Crank Disk Oval Cap 2 X2-228 229 Crank Axle Bushing 2 X2-229 230 Bearing 6005 2 X2-230 231 Crank Disk Axle 1 X2-231 232 Bearing Holder 1 X2-232 233 Belt 1 X2-233 234 Level Adjuster 2 X2-234 235 Control Board Base 1 X2-235 236 Speed Sensor Base 1 X2-236 237 Overlay 1 X2-237 238 Speaker Bracket 1 X2-238 300 301 Console Housing - Upper 1 X2-301 302
Inhaltszusammenfassung zur Seite Nr. 8
8 SMOOTH AGILE DMT X2 COMPLETE PARTS LIST Item No. Description Qty. Part No. 329 Pedal Swing Arm Cap 2 X2-329 330 Incline Frame Positioner 1 X2-330 331 Wheel Cap 112 x 41.5mm 2 X2-331 332 Wheel Cap 46 x 12mm 2 X2-332 333 Wheel 140 x 51.86mm 2 X2-333 334 Bearing Bracket 2 X2-334 335 Control Board Cover 1 X2-335 336 Oval Tube Cap 2 X2-336 337 Rear Cover – Left 1 X2-337 338 Rear Shroud – Left 1 X2-338 339 Rear Shroud – Right 1 X2-339 340 Rear Cover –Right 1 X2-340 341 Pivot Arm
Inhaltszusammenfassung zur Seite Nr. 9
9 www.smoothfitness.com COMPLETE PARTS LIST Item No. Description Qty. Part No. 419 Bushing 12 x 62mm 4 X2-419 420 M8 x 90mm Allen Head Bolt 4 X2-420 421 M12 C Clip 2 X2-421 422 12 x 20 x 0.5mm PU Washer 2 X2-422 423 2.5 x 7mm Screw 14 X2-423 424 M6 x 12mm Allen Head CAP Bolt 3 X2-424 425 6 x 10 x 1mm Spring Washer 11 X2-425 426 20 x 6 x T1.5mm Washer 3 X2-426 427 M42 C Clip 2 X2-427 428 M8 x 16mm Allen Head Bolt 8 X2-428 429 M10 x20mm Bolt 4 X2-429 430 10 x 16 x 2mm Spring Washe
Inhaltszusammenfassung zur Seite Nr. 10
10 SMOOTH AGILE DMT X2 COMPLETE PARTS LIST Item No. Description Qty. Part No. 462 M4 x 10mm Screw 2 X2-462 463 4mm Washer 4 X2-463 464 3 x 12mm Screw – Cone Point 6 X2-464 465 5.4 x 8 – M5 x 7mm Screw 2 X2-465 466 M4 x 10mm Screw 4 X2-466 500 501 4 x 12mm Screw – Cone Point 4 X2-501 502 15 x 22 – M8 x 10mm Bolt 2 X2-502 503 15 x 26 – M8 x 15mm Bolt 2 X2-503 504 M8 x 16mm Allen Head CAP Bolt 4 X2-504 505 20 x 78 – M14 x 35mm Bolt 2 X2-505 506 4 x 12mm Screw – Flat Point 4 X
Inhaltszusammenfassung zur Seite Nr. 11
11 www.smoothfitness.com COMPLETE PARTS LIST Item No. Description Qty. Part No. 616 Elevation Motor 1 X2-616 617 Speed Sensor 1 X2-617 618 Transformer 1 X2-618 619 Control Board 1 X2-619 620 Power Insert 1 X2-620 621 Power Switch 1 X2-621 622 Power Breaker 1 X2-622 623 Elector-magnetic System 1 X2-623 624 Magnetic Sensor 1 X2-624 625 5/16” Cable Tie 4 X2-625 626 3/8” Cable Tie 3 X2-626 627 Cable Plug 2 X2-627 628 Touch Control Board 1 X2-628 629 iPod dock connect 6pins wire 1
Inhaltszusammenfassung zur Seite Nr. 12
12 SMOOTH AGILE DMT X2 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 314 346 347 632 464 465 465 345 349 464 345 463 348 423 464 610 633 466 466 613 461 237 238 463 302 633 301 302 423 304 401 423 305 401 303 614 306 518 307 710 519 519 101 709
Inhaltszusammenfassung zur Seite Nr. 13
13 www.smoothfitness.com PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 402 203 201 403 204 402 204 103 403 201 202 706 407 627 627 202 203 318 707 407 707 315 515 514 513 210 407 102 316 317 210 706 513 514 515 504 501 701 502 501 701 502 503 503 701 504 701 501 501 413 412 211 104 105 211 412 413
Inhaltszusammenfassung zur Seite Nr. 14
14 SMOOTH AGILE DMT X2 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 320 415 414 414 321. 322 323 320 416 417 415 116 321 418 322 416 417 117 416 212 702 323 505 419 214 420 116 417 411 418 324 403 117 216 212 421 422 213 411 419 214 212 212 213 213 213 505 422 702 424 426 325 417 421 324 216 420 428 425 427 324 215 411 326 411 403 106 428 324 428 411 411 107 411 215 426 424 326 325 427 425 411
Inhaltszusammenfassung zur Seite Nr. 15
15 www.smoothfitness.com PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 429 430 431 217 218 217 311 458 431 311 430 429 329 217 434 218 217 108 429 508 332 330 221 219 437 411 425 416 507 405 334 438 222 438 329 438 434 425 219 437 435 425 424 430 112 331 430 435 333 435 220 111-4 416 405 222 110 334 220 223 426 405 109 224 439 435 433 333 404 332 225 429 441 331 442 405 111-1 443 114 111-2 623 417 111-3 404 433 111-1 618 433 616 436 444 445 226 446 447 227 624 410 448
Inhaltszusammenfassung zur Seite Nr. 16
16 SMOOTH AGILE DMT X2 PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 341 403 342 402 402 343 403 344 703 510 704 457 407 403 705 509 403 511 506 205 509 403 517 457 457 708 506 312 313 408 408 452 451 115 430 510 411 235 454 619 453 335 339 206 462 403 337 430 407 409 338 455 406 510 462 449 236 340 411 113 617 407 450 319 409 411 407 336 234 456 620 622 621 234 336
Inhaltszusammenfassung zur Seite Nr. 17
17 www.smoothfitness.com PARTS DIAGRAM MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. 632 238 629 347 633 633 301 203 628 601 607 607 204 609 610 609 601 611 203 630 602 204 631 612 613 634 609 102 609 615 103 608 614 301 608 101 602 616 606 618 616 619 623 603 604 603 622 620 617 605 618 616 621 617 606 603
Inhaltszusammenfassung zur Seite Nr. 18
18 SMOOTH AGILE DMT X2 ASSEMBLY MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED. CUT CUT CUT CUT 8 5 4 6 3 7 2 1
Inhaltszusammenfassung zur Seite Nr. 19
19 www.smoothfitness.com ASSEMBLY STEP 1: Connect the Main Frame to Incline Frame (A) Place Styrofoam block under Main Frame tube to provide clearance to 511 X4 position Incline Frame (109) for assembly. Remove the Blue film before you assemble the Incline Frame. 517 X4 (B) Hold the Incline Frame Holder – Front (708) to the Incline Frame (109), secure using M10 x 40mm Allen Head CAP Bolts (511), 10 x 16 x T2.0mm Spring Washer (517) on the Incline
Inhaltszusammenfassung zur Seite Nr. 20
20 SMOOTH AGILE DMT X2 ASSEMBLY STEP 2: Connect the Incline Transmission Tube (A) Rotate the Incline Frame (109) to align the bolt holes with the bolt Deleted: mating 507 X1 holes in the Incline Transmission Tube-Front (110). (B) Assemble the Incline Transmission Tube-Front (110) to the Incline Frame 508 X1 (109) with M10 x 56mm Allen Head Bolt (507), M10 Nylon Nut (508), and by 8mm Allen Key (C) and Wrench (D). (C) Tight the M10 x40mm Allen Head CAP Bolt
