Inhaltszusammenfassung zur Seite Nr. 1
Motocross dirt bike stand
66552
set up and operating instructions
®
distributed exclusively by Harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
sa Ve tHis Manual.
© ®
Copyright 2008 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form with
Inhaltszusammenfassung zur Seite Nr. 2
notice is used to sa Ve tHis Manual address practices Keep this manual for the safety warn- not related to personal injury. ings and precautions, assembly, operat- caution, without ing, inspection, maintenance and cleaning the safety alert procedures. Write the product’s serial symbol, is used to address number in the back of the manual near the practices not related to assembly diagram (or month and year of personal injury. purchase if product has no number). Keep this manual and
Inhaltszusammenfassung zur Seite Nr. 3
c. do not overreach. keep proper 11. Keep out of reach of children. footing and balance at all times. 12. Maintain labels and nameplates on This enables better control of the tool the tool. These carry important safety in unexpected situations. information. If unreadable or miss- d. dress properly. do not wear loose ing, contact Harbor Freight Tools for a clothing or jewelry. keep your replacement. hair, clothing and gloves away 13. The warnings, precautions, and in- from moving pa
Inhaltszusammenfassung zur Seite Nr. 4
speciFications U-Shaped Pedal Bracket Weight Capacity 350 lb. unpacking Long Bolt When unpacking, make sure that the item is intact and undamaged. If any parts 2. Insert Long Bolt (6) through: are missing or broken, please call Harbor • Washer (9); Freight Tools at the number shown on the • One hole in U-shaped Bracket un- cover of this manual as soon as possible. der Saddle (1); • Bushing (10); asseMbl Y • Hole in end of Pedal (3); read the entire iMportant • Bushing (10); saFetY in
Inhaltszusammenfassung zur Seite Nr. 5
• Hole in foot on Base (2); locking pin (11) • Washer (9); • Remaining hole in second Mounting Bracket (5); • Washer (9). 7. Secure Short Bolt with Lock Nut (8). 8. Before using the Bike Stand with a r-pin load, test the operation of the Pedal (12) and Release Bar, without any load, following the operating instructions below. 4. Insert Locking Pin (11) fully through the hole in the saddle and the base operating instructions to secure the stand in the up position. Lock it in place with
Inhaltszusammenfassung zur Seite Nr. 6
please read tHe FolloWing Maintenance and careFull Y ser Vicing THe MANUFACTUReR AND/OR DISTRIBUTOR Procedures not specifically HAS PROvIDeD THe PARTS LIST AND explained in this manual ASSeMBLy DIAgRAM IN THIS MANUAL AS A ReFeReNCe TOOL ONLy. NeITHeR THe must be performed only by a MANUFACTUReR OR DISTRIBUTOR MAKeS qualified technician. ANy RePReSeNTATION OR WARRANTy OF ANy KIND TO THe BUyeR THAT He OR SHe t o preVent IS qUALIFIeD TO MAKe ANy RePAIRS TO THe serious injur Y PROD
Inhaltszusammenfassung zur Seite Nr. 7
parts list parts list part description Qty. part description Qty. 1 Saddle 1 7 M10x50 Bolt (Short Bolt 2 2 Base 1 8 M10 Lock Nut 3 3 Pedal 1 9 Washer 11 4 Release Bar 1 10 Bushing 2 5 Mounting Bracket 2 11 Locking Pin 1 6 M10x70 Bolt (Long Bolt) 1 12 R-Pin 1 asseMbl Y diagraM 9 1 8 10 9 8 9 8 9 5 2 9 3 9 6 9 5 9 9 7 9 9 7 4 note: Locking Pin (11) and R-Pin (12) not shown. record product’s serial number Here: note: If product has no serial number, record month and year of purchase instead. note:
Inhaltszusammenfassung zur Seite Nr. 8
liMited 90 da Y WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installa
