Inhaltszusammenfassung zur Seite Nr. 1
TWR-180
TWR-120
ROTARY CUTTER
Published 2006-06-29 Serial #C31400382705-C31400552806 Inclusive Part No. C314TG010P
Serial #C31500030705-C31500039806 Inclusive
PARTS MANUAL
An Operators Manual with IMPORTANT Safety, Assembly, Operation
and Maintenance information was packaged with this Parts Manual
during final inspection at the factory. If the Operators Manual is
missing at any time, please contact Tiger Corporation to receive your
free replacement manual.
Tiger Corporation
3301 N. Louise
Inhaltszusammenfassung zur Seite Nr. 2
PARTS ORDERING GUIDE The following instructions are offered to help eliminate delay and error in processing purchase orders for the equipment in this section. 1. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts were ordered. 2. The Purchase Order must clearly list the quantity of each part, the complete and correct part number, and the description of
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS CENTER SECTION FRAME .................................................. -3- WING FRAME, RIGHT ....................................................... -5- WING FRAME, LEFT ........................................................ -7- HITCH FRAME AND CENTER WHEEL STANDARD ............................... -9- 10' SKIRT ASSEMBLY ...................................................... -11- HITCH JACK, 15" SIDE WIND (232-800) ........................................ -12- HUB, AXLES & TI
Inhaltszusammenfassung zur Seite Nr. 4
CENTER SECTION FRAME -3- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 5
CENTER SECTION FRAME Ref. Part No. Description Qty. 1 C314-101 Center section assembly 1 2 228-012 Hose organizer 2 3 250-112 Bolt, 3/4 x 3 UNC 6 4 270-004 Lock nut, 5/8 UNC 10 5 250-093 Bolt, 5/8 x 1-3/4 UNC 2 6 256-006 Flat washer, 5/8 2 7 C310-112 Skid mount assembly 2 8 250-084 Bolt, 5/8 x 4-1/2 UNC 4 9 C301-113 Wing lift spacer plate 2 10 250-060 Bolt, ½ x 1-3/4 UNC 3 11 C310-144 Retainer pin, 1 x 5-3/16 U.L 1 12 256-011 Flat washer, 1/2 3 13 270-007 Lock nut, 1/2 UNC 3 14 256-001 Flat was
Inhaltszusammenfassung zur Seite Nr. 6
WING FRAME, RIGHT -5- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 7
WING FRAME, RIGHT Ref. Part No. Description Qty. 1 C314-155 Wing assembly, right 1 2 752-014 Hinge pin, 15" O.A. 4 3 C310-140 Hinge spacer tube, 13-7/8" O.A. 2 5 262-011 Roll Pin, 3/8 x 1-3/4 6 6 C310-141 Hinge spacer tube, 10-3/8" O.A. 1 7 262-006 Roll pin, 3/8 x 2 5 8 256-001 Flat washer, 1 6 9 C301-140 Pin, 1 x 3-13/32" O.A. 2 10 C301-114 Floating lug 2 13 330-7031 Gearbox, CCW 1 * CW Gearbox (330-7030) is required for fixed knife, material distribution, and sod kits. See your Schulte Deale
Inhaltszusammenfassung zur Seite Nr. 8
WING FRAME, LEFT -7- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 9
WING FRAME, LEFT Ref. Part No. Description Qty. 1 C314-150 Wing assembly, left 1 2 752-014 Hinge pin, 15" O.A. 4 3 C310-140 Hinge spacer tube, 13-7/8" O.A. 2 5 262-011 Roll Pin, 3/8 x 1-3/4 6 6 C310-141 Hinge spacer tube, 10-3/8" O.A. 1 7 262-006 Roll pin, 3/8 x 2 5 8 256-001 Flat washer, 1 6 9 C301-140 Pin, 1 x 3-13/32" O.A. 2 10 C301-114 Floating lug 2 13 330-7030 Gearbox, CW 1 * CCW Gearbox (330-7031) is required for fixed knife, material distribution, and sod kits. See your Schulte Dealer
Inhaltszusammenfassung zur Seite Nr. 10
HITCH FRAME AND CENTER WHEEL STANDARD -9- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 11
HITCH FRAME AND CENTER WHEEL STANDARD Ref. Part No. Description Qty. 1 271-005 Cotter pin, 3/16 x 1-1/2 3 2 256-001 Flat washer, 1 13 3 302-013 Clevis pin, 1 x 2-1/8 2 4 262-006 Roll pin, 3/8 x 2 3 5 C310-113 Hitch clevis 1 7 C310-118 Pivoting hitch assembly. 1 8 C310-119 Pivot hitch weld sleeve 1 9 250-060 Bolt, 1/2 x 1-3/4 UNC 3 10 256-011 Flat washer, 1/2 7 11 270-007 Lock nut, 1/2, UNC 3 12 273-006 Grease nipple, self tap 6 13 C310-117 Hitch frame assembly 1 14 C310-142 Retaining pin, 1 x 3
Inhaltszusammenfassung zur Seite Nr. 12
10' SKIRT ASSEMBLY Ref. Part No. Description Qty. 1 250-060 Bolt, 1/2" x 1-3/4" UNC 2 2 250-059 Bolt, 1/2" x 1-1/2" UNC 2 3 256-011 Flat washer, 1/2" 9 4 C311-105 Chain guard, single 1 C311-106 Chain guard, double 1 5 250-145 Bolt, 1" x 4" UNC 2 7 270-007 Lock nut, 1/2" UNC 9 8 C311-102 Hinge pin, 29 1/8" O.A. 1 9 270-020 Lock nut, 1" UNC 4 10 C311-101 Skirt assembly, 10' 1 11 C311-103 Hinge pin, 5" O.A. 1 12 C302-104 Counter weight 3 13 256-001 Flat washer, 1" 4 14 250-129 Bolt, 1" x 6" UNC 2 1
Inhaltszusammenfassung zur Seite Nr. 13
HITCH JACK, 15" SIDE WIND (232-800) Ref. Part No. Description Qty. 1 232-621 Outer Tube and Mount 1 2 232-622 Inner Tube/ S&N Assembly 1 10 232-623 Crank, Handle 1 11 232-624 Cover 1 12 232-625 Bolt,1/4-20 x 3.12" Carriage 2 13 232-626 Locknut, 1/4" 2 14 232-627 Pull Pin Assembly 1 16 232-628 Grease Fitting 1 20 232-630 Repair Kit, c/w Ref # 3 to 9 1 NOTE: THIS JACK WILL REPLACE JACK 232-600 -12- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 14
HUB, AXLES & TIRES When attaching the wheels to the hub, be sure the lock washer is installed agianst the wheel. To reduce the possibility of the laminations separating, the laminated tires should be installed with the laminations oriented as shown above. -13- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 15
HUB, AXLES & TIRES Ref. Part No. Description Qty. 1 208-018 Spindle, c/w #9, 15, 16, double end 1 1 208-019 Spindle, c/w #9, 15, 16, single end 1 2 207-026 Seal 1 3 207-019 Bearing 1 4 207-020 Race 1 5 273-006 Grease nipple, self-tap 1 6 205-007 Hub, c/w outer races 1 7 207-025 Race 1 8 207-024 Bearing 1 9 271-005 Cotter pin, 3/16 x 1-1/2 1 10 201-005 Wheel, 15 x 5 KB, 5 bolt, For 7.00 Tire 1 201-010 Wheel, 15 x 8 x 5, For 9.5L Tire 1 11 211-002 Valve stem 1 12 210-167 Tire, 7.00 x 15, 8 ply 1
Inhaltszusammenfassung zur Seite Nr. 16
DRIVELINE SHIELDING -15- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 17
DRIVELINE SHIELDING Ref. Part No. Description Qty. 1 C314-203 Center section shield assembly CE 1 3 251-008 Bolt, M8 x 20mm 15 4 255-015 Lock washer, 5/16" 15 5 256-020 Flat washer, 5/16" 15 6 C314-202 Splitter shield mount 1 11 341-6235 Plastic shield 2 12 C314-204 Center gearbox pivot shield mount 1 13 341-600 Plastic shaft cover for splitter, 10' units 1 14 250-006 Bolt, 5/16" x 3/4" UNC, 10' units 2 15 271-008 Cotter pin, 1/8" x 1" 2 16 C301-203 Shield hinge pin 1 25 251-151 Machine Screw #1
Inhaltszusammenfassung zur Seite Nr. 18
CHAIN GUARDS -17- June 27, 2006
Inhaltszusammenfassung zur Seite Nr. 19
CHAIN GUARDS C310-550 Double Chain Guard Kit, S150 Ref. Part No. Description Qty. 1 C310-555 Chain guard double, wing front 4 2 C310-552 Chain guard double, center front outer 2 3 C310-551 Chain guard double, center front middle 1 4 C310-554 Chain guard double, center rear 2 5 C310-557 Chain guard double, wing rear 4 6 C310-558 Chain guard double, wing rear outer 2 7 250-026 Bolt, 3/8" x 2-1/2" UNC 2 8 256-017 Flat washer, 3/8" 4 9 270-017 Lock nut, 3/8" UNC 2 10 225-109 Chain, 5/16" proof coil,
Inhaltszusammenfassung zur Seite Nr. 20
BLADE CARRIERS -19- June 27, 2006
