Inhaltszusammenfassung zur Seite Nr. 1
Operator’s Manual
SW30 Series
Walk-Behind Mowers
Model Number Description
5900855 SW30KAV1852, 52” Cut Walk-Behind Mower
5900856 SW30KAV2061, 61” Cut Walk-Behind Mower
5900887 SW30KAV2052, 52” Cut Walk-Behind Mower
5900899 SW30KAV2661, 61” Cut Walk-Behind Mower
5900964 SW30KAV1848, 48” Cut Walk-Behind Mower
5900547 SW30KAV1948, 48” Cut Walk-Behind Mower
5900548 SW30KAV1952, 52” Cut Walk-Behind Mower
5900549 SW30KAV2152, 52” Cut Walk-Behind Mower
5900550 SW30KAV2461, 61” Cut Walk-Behind
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing this quality-built SNAPPER WARNING PRO product. We’re pleased that you’ve placed your confidence in the SNAPPER PRO brand. When The engine exhaust from this product contains chemicals operated and maintained according to the instructions in known to the State of California to cause cancer, birth this manual, your SNAPPER PRO product will provide defects, or other reproductive harm. many years of dependable service. This manual contains safety information to mak
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Regular Maintenance ....................................... 20 Operator Safety .................................................. 2 Maintenance Schedule .........................................20 Safety Rules and Information .................................2 Checking/Adding Fuel ...........................................21 Safety Decals ...................................................... 8 Fuel Filter ..............................................................21 Safety
Inhaltszusammenfassung zur Seite Nr. 4
Safety Rules & Information Operating Safety Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual is a way to train yourself. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can be dangerous! Remember, you
Inhaltszusammenfassung zur Seite Nr. 5
Safety Rules & Information Slope Operation You could be seriously injured if you use this unit on too steep of a slope. Using the unit on a slope that is too steep where you do not have adequate footing and unit traction (and control) can cause you to lose control and possibly slip and fall or roll the unit over. Always mow across slopes, not up and down (you could slip and fall.) Also, note that the surface you are on can greatly impact your ability to safely operate this machine. Wet gra
Inhaltszusammenfassung zur Seite Nr. 6
Safety Rules & Information Fuel and Maintenance Always disengage all drives, shutoff the engine and remove the key before doing any cleaning, refueling or servicing. Gasoline and its vapors are extremely flammable. Do not smoke while operating or refueling. Do not add fuel while engine is hot or running. Allow engine to cool for at least 3 minutes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage or other enclosed area that is not well ventilated. Gasoline spi
Inhaltszusammenfassung zur Seite Nr. 7
Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 2. Mow only in the daylight or with good artificial TRAINING light, keeping away fro
Inhaltszusammenfassung zur Seite Nr. 8
Safety Rules & Information 23. Use care when approaching blind corners, shrubs, 6. Keep all movement on the slopes slow and trees or other objects that may obscure vision. gradual. Do not make sudden changes in speed 24. To reduce fire hazard, keep unit free of grass, or direction. leaves & excess oil. Do not stop or park over dry 7. See your authorized dealer for recommendations leaves, grass or combustible materials. of available weights to improve stability. Do Not 1. Avoid starting
Inhaltszusammenfassung zur Seite Nr. 9
Safety Rules & Information mufflers, and engine to prevent fires. Clean up oil SERVICE AND MAINTENANCE or fuel spillage. To avoid personal injury or property damage, use 10. Let engine cool before storing and do not store extreme care in handling gasoline. Gasoline is near flame. extremely flammable and the vapors are explosive. 11. Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting. Safe Handling of Gasoline 12. Park machine on level ground
Inhaltszusammenfassung zur Seite Nr. 10
Operator Safety Safety Decals Before operating your unit, read the safety decals. The 1 cautions and warnings are for your safety. To avoid a personal injury or damage to the unit, understand and follow all safety decals. WARNING 2 If any safety decals become worn or damaged, and cannot be read, order replacement decals from your local dealer. 3 4 5 4 1 2 2 5 3 3 8 www.SnapperPro.com Not for Reproduction
Inhaltszusammenfassung zur Seite Nr. 11
Operator Safety Safety Icons The alert symbol ( ) is used to identity safety information Safety Interlock System about hazards that can result in personal injury. A signal word (DANGER, WARNING, or CAUTION) is used with the This unit is equipped with safety interlock switches. alert symbol to indicate the likelihood and the potential These safety systems are present for your safety, severity of the injury. In addition, a hazard icon may be do not attempt to bypass safety switches, and
Inhaltszusammenfassung zur Seite Nr. 12
SAMPLE SAMPLE Features and Controls Features and Controls Identification Numbers A North American Models When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. Record your model / serial number and engine serial numbers on the space provided for easy access. These numbers can be found in the locations shown. NOTE: For location of engine identification numbers, refer to Figure 1. Identification Numbers engine owner’s manual. A. I
Inhaltszusammenfassung zur Seite Nr. 13
Features and Controls S/N: 2014523387 & Below A B Figure 2A. Control Locations (S/N: 2014523387 & Below) Control Functions The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Forward Speed Control Lever Ignition Switch (Manual Start Models) Reverse
Inhaltszusammenfassung zur Seite Nr. 14
Features and Controls B Ignition Switch (Electric Start Models) Cutting Height Adjustment Handles The ignition switch starts and stops the engine, it has three The cutting height adjustment handles control the mower positions: deck cutting height. To raise the mower deck cutting height crank the cutting height adjustment handles clockwise. To OFF Stops the engine and shuts off the lower the mower deck cutting height, crank the cutting electrical system. height adjustment handles count
Inhaltszusammenfassung zur Seite Nr. 15
Operation Operation A General Operating Safety Before first time operation: � Be sure to read all information in the Safety and C Operation sections before attempting to operate this unit. B � Become familiar with all of the controls and how to stop the unit. � Drive in an open area without mowing to become accustomed to the unit. Figure 3. Pre-start Checks Checks Before Starting A. Fuel Tank Filler Neck B. Engine Oil Dipstick � Check that crankcase is filled to full mark on the engine
Inhaltszusammenfassung zur Seite Nr. 16
Operation Starting the Engine (Electric Start Stopping the Mower Engines) 1. Gently squeeze both reverse speed control levers evenly to stop the unit. 1. Engage the parking brake and make sure that the 2. Once the unit is stopped, firmly depress the neutral PTO switch is disengaged and the forward speed control return pedal to place the transmission in neutral. lever is in the NEUTRAL position. 2. NOTE: A warm engine may not require choking. 3. Disengage the PTO by pushing down on the PT
Inhaltszusammenfassung zur Seite Nr. 17
Operation S/N: 2014523387 & Below The cutting height indicators will help you identify the A cutting height. 1. Pull the cutting height adjustment handle (A, Figure 6) up and out of the handle lock position (B) and crank the handle CLOCKWISE to raise the deck to the desired cutting height. Crank the handle COUNTER-CLOCKWISE to lower the deck to the desired cutting height. After the desired cutting heights are achieved position the cutting B height adjustment handles into the handle lock
Inhaltszusammenfassung zur Seite Nr. 18
Operation To Slow or Stop Machine Driving The Mower 1. Gently squeeze both reverse speed control levers evenly Before attempting to drive the mower make sure you have to slow the machine. read the Features and Controls section and understand the location and function of the controls. 2. Continuing to squeeze the reverse speed control levers will stop the machine. The hydrostatic transmission has an infinite number of 3. Once the machine is stopped, firmly depress the neutral speeds bet
Inhaltszusammenfassung zur Seite Nr. 19
Operation Mowing Before mowing, set the cutting height as described in CUTTING HEIGHT ADJUSTMENT. 1. Engage the parking brake. Make sure the PTO switch is disengaged and the forward speed control lever is in the NEUTRAL position 2. Start the engine (see Starting The Engine). 3. Set the throttle to FULL. 4. Engage the PTO by pulling up on the PTO switch. 5. Begin mowing. See Mowing Recommendations for tips on mowing patterns, lawn care, and trouble shooting information. 6. When finis
Inhaltszusammenfassung zur Seite Nr. 20
Operation When and How Often to Mow The time of day and condition of the grass greatly affect the results you’ll get when mowing. For the best results, follow these guidelines: 1. Mow when the grass is between three and five inches high. 2. Mow with sharp blades. Short clippings of grass one inch or shorter decompose more quickly than longer blades. Sharp mower blades cut grass cleanly and efficiently, preventing frayed edges which harm the Where possible, make one or two passes around
