Inhaltszusammenfassung zur Seite Nr. 1
OPERATOR’S
MANUAL
S50X Series
Zero-Turn Riding Mower
Model Number: Description
5900683 S50XKAV1936, 19HP Kawasaki, 36” Cut Zero-Turn Riding Mower
5900709 S50XBS2648, 26HP Briggs & Stratton, 48” Cut Zero-Turn Riding Mower
5900734 S50XKAV1948, 19HP Kawasaki, 48” Cut Zero-Turn Riding Mower
Briggs & Stratton Yard Power Products Group
5101098
5375 North Main Street
Revision IR
Munnsville, NY 13409
Rev. Date: 12/2007
800-933-6175
TP 100-7362-IR-M5-SP
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing this quality-built Snapper Pro product. We’re pleased that you’ve placed your confidence in the Snapper Pro brand. When operated and maintained according to the instructions in this manual, your Snapper Pro product will provide many years of dependable service. This manual contains safety information to make you aware of the hazards and risks associated with this machine and how to avoid them. This machine is designed and intended to be used and maintained according t
Inhaltszusammenfassung zur Seite Nr. 3
Safety Controls Operation Maintenance Troubleshooting Specifications Table of Contents Operator Safety .....................................................2 Safety Rules and Information ...........................................2 Safety Decals....................................................................8 Safety Interlock System....................................................9 Features & Controls ..............................................10 Identification Numbers ................
Inhaltszusammenfassung zur Seite Nr. 4
Operator Safety Operator Safety Safety Rules and Information OPERATING SAFETY Congratulations on purchasing a superior-quality piece of lawn and garden equipment. Our products are designed and manufactured to meet or exceed all industry standards for safety. Do not operate this machine unless you have been trained. Reading and understanding this operator’s manual is a way to train yourself. Power equipment is only as safe as the operator. If it is misused, or not properly maintained, it can
Inhaltszusammenfassung zur Seite Nr. 5
Safety Operator Safety SLOPE OPERATION Operation on slopes can be dangerous. Using the unit on a slope that is too steep where you do not have adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollover. You should not operate on a slope greater than a 5.4 foot rise over a 20 foot length (15 degrees). Always mow across slopes, not up and down (to maintain traction on the wheels) and avoid sudden turns or rapid speed changes. Reduce speed and use ex
Inhaltszusammenfassung zur Seite Nr. 6
Operator Safety RETAINING WALLS, DROP-OFFS, AND WATER Retaining walls and drop-offs around steps and water are a common hazard. Give yourself a minimum of two mower widths of clearance around these hazards and hand-trim with a walk behind mower or string trimmer. Wheels dropping over retaining walls, edges, ditches, embankments, or into water can cause rollovers, which may result in serious injury, death, or drowning. FUEL AND MAINTENANCE Always disengage all drives, shutoff the engine, and rem
Inhaltszusammenfassung zur Seite Nr. 7
Safety Operator Safety Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. 2. Mow only in the daylight or with good artificial light, TRAINING keeping away from holes an
Inhaltszusammenfassung zur Seite Nr. 8
Operator Safety spark arrester. It is a violation of California Public Do Not Resource Code Section 4442 to use or operate the 1. Avoid starting, stopping, or turning on a slope. If tires engine on or near any forest-covered, brush-covered, or lose traction (i.e. machine stops forward motion on a grass-covered land unless the exhaust system is slope), disengage the blade(s) (PTO) and drive slow off equipped with a spark arrester meeting any applicable the slope. local or state laws. Other sta
Inhaltszusammenfassung zur Seite Nr. 9
Safety Operator Safety Repair, if necessary, before restarting. SERVICE AND MAINTENANCE 12. Park machine on level ground. Never allow untrained To avoid personal injury or property damage, use extreme personnel to service machine. care in handling gasoline. Gasoline is extremely flammable 13. Use jack stands to support components when required. and the vapors are explosive. 14. Carefully release pressure from components with stored energy. Safe Handling of Gasoline 15. Disconnect battery or rem
Inhaltszusammenfassung zur Seite Nr. 10
Operator Safety Safety Decals This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your un
Inhaltszusammenfassung zur Seite Nr. 11
Safety Operator Safety Safety Icons The alert symbol is used to identity safety information about hazards that can result in personal injury. A signal Safety Interlock System word (DANGER, WARNING, or CAUTION) is used with the alert symbol to indicate the likelihood and the potential This unit is equipped with safety interlock switches. These severity of the injury. In addition, a hazard icon may be safety systems are present for your safety, do not attempt used to represent the type of hazar
Inhaltszusammenfassung zur Seite Nr. 12
S SA AM MP PL LE E Features and Controls Features and Controls Identification Numbers When contacting your authorized dealer for replacement parts, service, or information you MUST have these numbers. Record your part number, serial number and engine serial A numbers in the space provided on the inside front cover for easy access. These numbers can be found in the locations shown in Figure 1. NOTE: For location of engine identification numbers, refer to Figure 1. Identification Numbers the eng
Inhaltszusammenfassung zur Seite Nr. 13
Controls Features and Controls Figure 2. Control Locations Control Functions The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Seat Adjustment Lever Ground Speed Control Levers The seat can be adjusted forward and back. Move the lever These levers cont
Inhaltszusammenfassung zur Seite Nr. 14
Features & Controls Fuel Tank Cap Parking Brake To remove the cap, turn counterclockwise. DISENGAGE Releases the parking brake. Fuel Level Gauge ENGAGE Locks the parking brake. Displays the fuel level in the tank. Pull the parking brake lever up to engage the parking brake. Push the lever down to disengage the parking brake. NOTE: Transmission Oil Fill To start the unit the parking brake must be engaged. This unit is equipped with two transmission oil reservoirs. The transmission oil reservo
Inhaltszusammenfassung zur Seite Nr. 15
Operation Operation Operation General Operating Safety WARNING Before first time operation: Never operate on slopes greater than (15°) which is a Be sure to read all information in the Safety and rise of 5.4 feet (1,6 m) vertically in 20 feet (607 cm) Operation sections before attempting to operate this horizontally. tractor and mower. Select slow ground speed before driving onto a slope. Become familiar with all of the controls and how to stop Use extra caution when operating on slopes wit
Inhaltszusammenfassung zur Seite Nr. 16
Operation Check Tire Pressures Tire pressure should be checked periodically, and maintained at the levels shown in the chart. Note that these pressures may differ slightly from the “Max Inflation” stamped on the side-wall of the tires. The pressures shown provide proper traction, improve cut quality, and extend tire life. Tire Pressure Front 40 psi (2,76 bar) Rear 15 psi (1,03 bar) Figure 4. Checking Tire Pressure Seat Adjustment See Figure 5. The seat can be adjusted forward and backward. Mo
Inhaltszusammenfassung zur Seite Nr. 17
Operation Operation Mowing Height Adjustment The cutting height adjustment pin (A, Figure 6) controls the mower cutting height. The cutting height is adjustable between 1-1/2” (3,37 cm) and 4-1/2” (11,47 cm) in 1/4” C (0,64 cm) increments. A B 1. Depress the deck lift foot pedal (B) until it locks into the 4-1/2” (11,47 cm) position. 2. Place the cutting height adjustment pin in the desired cutting height. 3. Depress the deck lift foot pedal then push the lock lever (C) toward the right to rele
Inhaltszusammenfassung zur Seite Nr. 18
Operation Pushing the Rider By Hand Starting the Engine NOTICE WARNING DO NOT TOW RIDER If you do not understand how a specific control Towing the units will cause transmission damage. Do functions, or have not yet thoroughly read the not use another vehicle to push or pull this unit. FEATURES & CONTROLS section, do so now. Do NOT attempt to operate the tractor without first becoming familiar with the location and function of ALL controls. 1. Disengage the PTO, engage the parking brake, turn th
Inhaltszusammenfassung zur Seite Nr. 19
Operation Operation Smooth Travel Zero Turn Driving Practice The lever controls of the The lever controls of the Zero Turn rider are responsive, and Zero Turn rider are learning to gain a smooth and efficient control of the rider’s responsive. forward, reverse, and turning movements will take some practice. The BEST method of handling the ground Spending some time going through the maneuvers shown speed control levers is in and becoming familiar with how the unit accelerates, travels, three step
Inhaltszusammenfassung zur Seite Nr. 20
Operation Practice Turning Around a Corner Practice Turning In Place While traveling forward allow one lever to gradually return To turn in place, “Zero Turn,” gradually move one ground back toward neutral. Repeat several times. speed control lever forward from neutral and one lever back from neutral simultaneously. Repeat several times. NOTE: To prevent pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward. NOTE: Changing the amount each lever is pu
