Inhaltszusammenfassung zur Seite Nr. 1
Tube and Latch Kit
Installation
Part No. 1687262
For 38” Regent Series Twin Catchers
Instructions
Ref. Part No. Qty. Description Ref. Part No. Qty. Description
Kit Contents:
10 1919326 1 Lockwasher, 14 1960686 6 Nut, Nyloc,
Ref. Part No. Qty. Description
5/16
5/16-18
1 1732735A 1 Seal Plate
11 1731420 1 Label, ID,
15 1733432A 1 Brace
2 1732799 1 Seal
1695163
16 1930591 1 Capscrew,
3 1960404 6 Screw, Phillips,
12 1931338 5 Carriage Bolts,
5-16 x 3/4
#10-24 x 3/4
5/16-18 x 1-3/4
17 1733416A 1 La
Inhaltszusammenfassung zur Seite Nr. 2
Installation Instructions Tube and Latch Kit 2. From the inside of grass catcher (B, Figure 3) cover use cover plate (A) as a template to drill six 13/64” holes (C) on grass catcher cover (B) as shown. 3. Inside grass catcher cover (B, Figure 4) place the A B seal (D), and cover plate (A). Secure using #10-24 x 3/4 screws (C), and #10-24 locknuts (D). C C C Figure 3. Drill Adapter Plate Holes A. Cover Plate B. Grass Catcher Cover C. New13/64” Hole Locations A E B B C E D C C Figure 4. Install
Inhaltszusammenfassung zur Seite Nr. 3
Tube and Latch Kit Installation Instructions Drill 11/32” C A Hole Here B A 2“ B C D Figure 5. Drill Hole In Boot A. New 11/32” Hole Figure 7. Remove Latch B. Existing Hole A. Cover Assembly C. Boot B. Latch C. Locknuts, Nylock, #10-24 D. Screws, #10-24 x 5/8 B C C D A A B Figure 6. Install Puck to Boot A. Boot D B. Puck, Metal C. Capscrew, Thin Head, 5/16-18 x 3/4 D. Locknuts 5/16-18 4. Drill a new 11/32 hole (A, Figure 5) 2” from the exist- ing hole (B) in boot (C) as shown. 5. Secure the p
Inhaltszusammenfassung zur Seite Nr. 4
Installation Instructions Tube and Latch Kit C E C H C G F C D A G D B D F Figure 10. Install Tube in Cover B A. Tube A B. Seal D C. Slits Figure 9. Install “U” Tube A. “U” Tube B B. Channel Assembly C. Carriage Bolts, 5/16-18 X 1-3/4 D. Nuts, Nyloc, 5/16-18 E. “L” Channel C F. Saddle Brackets D G. New 11/32 Holes H. Capscrew, 5/16-18 x 3/4 8. Install the “U” tube (A, Figure 9) and “L” channel (F) to channel assembly (B) securing with 5/16-18 x 3/4 carriage bolts (C) and 5/16-24 nuts (E). 9.
