Inhaltszusammenfassung zur Seite Nr. 1
How to use this file
Print Vendor
Operator’s Manuals
Instructions
Paper Size: 11x17
Body - 50 lbs brilliant white offset or equivalent
Cover - on pre-printed two tone “Swash” stock.
Press: Body - 1 color, 2-sided
Cover - 1 color, 1 sided
Bindery: Saddle stitch, face trim *if too thick for saddle stitch, tape bind
Covers: FRONT COVER is present at the beginning of the file.
BACK COVER is the page immediately after the front cover.
The part number for this manual (typically a
Inhaltszusammenfassung zur Seite Nr. 2
THIS PAGE INTENTIONALLY BLANK (FOR PLACEMENT ONLY - DO NOT PRINT)
Inhaltszusammenfassung zur Seite Nr. 3
OPERATOR’S MANUAL 250 Z Series (Snapper) Mfg. No. Description 7800072 ERZT185440BVE, 18.5HP European Zero-Turn Rider with 44” Mower Javelin Series (Simplicity) Mfg. No. Description 7800071 ERZT185440BVE, 18.5HP European Zero-Turn Rider with 44” Mower Form No. 7100544 Revision 00 Rev.Date 1/2006 TP 100-5147-00-HZ-SN
Inhaltszusammenfassung zur Seite Nr. 4
PRODUCTS, INC. McDonough, GA., 30253 www.snapper.com MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2006, Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Safety Rules & Information.................................2 Troubleshooting, Adjustments & Service .......21 Troubleshooting the Rider .....................................21 Identification Numbers........................................5 Troubleshooting the Mower ...................................22 Safety Decals .......................................................6 Safety Interlock System......................................7 Seat Adjustments............................
Inhaltszusammenfassung zur Seite Nr. 6
Safety Rules & Information ! IMPORTANT SAFETY INSTRUCTIONS ! WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only per- sons who understand these instructions to operate machine. Each person operating the mac
Inhaltszusammenfassung zur Seite Nr. 7
Safety Rules and Information ! IMPORTANT SAFETY INSTRUCTIONS ! PREPARATION OPERATION (Continued From Previous Page) 1. Mount and dismount machine from left side. Keep clear of 6. Check the area to be mowed and remove all objects such as discharge opening at all times. toys, wire, rocks, limbs and other objects that could cause 2. Start engine from operator's seat, if possible. Make sure injury if thrown by blade or interfere with mowing. blades are OFF and parking brake is set. 7. Keep people
Inhaltszusammenfassung zur Seite Nr. 8
Safety Rules and Information ! IMPORTANT SAFETY INSTRUCTIONS ! TOWING MAINTENANCE 1. Tow only with a machine that has a hitch designed for tow- (Continued From Previous Column) ing. DO NOT attach towed equipment except at the hitch 6. Always provide adequate ventilation when running engine. point. Exhaust gases contain carbon monoxide, an odorless and 2. Follow the manufacturer's recommendation for weight limits deadly poison. for towed equipment and towing on slopes. 7. Disconnect negative (b
Inhaltszusammenfassung zur Seite Nr. 9
S SA AM MP PL LE E Identification Numbers Identification Numbers Unit ID Tag PRODUCT REFERENCE DATA Model Description Name/Number Unit MFG Number Unit SERIAL Number When contacting your authorized dealer for replace- Mower Deck MFG Number Mower Deck SERIAL Number ment parts, service, or information you MUST have these numbers. Dealer Name Date Purchased Record your model name/number, manufacturer’s identi- fication numbers, and engine serial numbers in the space provided for easy access. The
Inhaltszusammenfassung zur Seite Nr. 10
Safety Decals SAFETY DECALS This unit has been designed and manufactured to pro- All DANGER, WARNING, CAUTION and instructional vide you with the safety and reliability you would expect messages on your rider and mower should be carefully from an industry leader in outdoor power equipment read and obeyed. Personal bodily injury can result when manufacturing. these instructions are not followed. The information is for your safety and it is important! The safety decals below Although reading t
Inhaltszusammenfassung zur Seite Nr. 11
Safety Decals (Cont.) & Interlock System Checks SAFETY INTERLOCK SYSTEM This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamp- er with safety devices. Check their operation regularly. Operational SAFETY Checks TEST 1 — ENGINE SHOULD NOT CRANK IF: PTO switch is engaged, OR Decal - Danger - Cut Hands Motion control levers are not locked in their NEU- Part No. 7022841 TRAL LOCKED positions
Inhaltszusammenfassung zur Seite Nr. 12
Features & Controls CONTROL FUNCTIONS The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Motion Control Levers Engine Speed Control These levers control the ground speed and direction of The engine speed control controls engine speed. Move the rider. The
Inhaltszusammenfassung zur Seite Nr. 13
Features & Controls Ignition Switch Fuel Tank Cap The ignition switch starts and stops the engine; it has To remove the cap, turn counterclockwise. three positions: Mower Cutting Height Adjustment Lever OFF Stops the engine and shuts off the The mower cutting height is adjustable from 1-1/2” to 4”, in electrical system. 1/2” increments. See CUTTING HEIGHT ADJUSTMENT RUN Allows the engine to run and powers the for adjustment information. electrical system. Parking Brake START Cranks the engine
Inhaltszusammenfassung zur Seite Nr. 14
Operation GENERAL OPERATING SAFETY CHECKS BEFORE STARTING Before first time operation: Check that the crankcase is filled to full mark on dip- stick. See the engine owner’s manual for instructions Be sure to read all information in the Safety and and oil recommendations. Operation sections before attempting to operate this rider and mower. Make sure all nuts, bolts, screws and pins are in place and secure. Become familiar with all of the controls and how to stop the unit. Adjust the se
Inhaltszusammenfassung zur Seite Nr. 15
Operation 9. Stop the engine (see STOPPING THE RIDER AND STARTING THE ENGINE ENGINE). 1. While sitting in the operator’s seat, make sure the PTO switch is disengaged and the motion control PUSHING THE RIDER BY HAND levers are locked in the NEUTRAL LOCKED position. 1. Disengage the PTO, lock the motion control levers 2. Set the engine speed control to FAST position. Then into their neutral locked positions, turn the ignition fully close the choke. NOTE: A warm engine may not OFF, remove the key,
Inhaltszusammenfassung zur Seite Nr. 16
Operation Smooth Travel ZERO TURN DRIVING PRACTICE The motion control levers of the zero turn rider are The motion control levers of the zero turn rider are responsive . responsive, and learning to gain a smooth and efficient The BEST method of han- control of the rider’s forward, reverse, and turning move- dling the ground speed ments will take some practice. levers is in three steps — Spending some time going through the maneuvers as shown in Figure 3. shown and becoming familiar with how the
Inhaltszusammenfassung zur Seite Nr. 17
Operation Practice Turning Around a Corner Practice Turning In Place While traveling forward allow one lever to gradually return To turn in place, “zero turn,” gradually move one motion back toward neutral. Repeat several times. control lever forward from neutral and one lever back from neutral simultaneously. Repeat several times. NOTE: To prevent pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward. NOTE: Changing the amount each lever is pulled—f
Inhaltszusammenfassung zur Seite Nr. 18
Operation ATTACHING A TRAILER A The maximum weight of a towed trailer should be less than 200 lbs (91kg). Secure the trailer with an appropri- ately sized clevis pin (A, Figure 9) and clip (B). Excessive towed loads can cause loss of traction and loss of control on slopes. Reduce towed weight when operating on slopes. The surface being driven on greatly B impacts traction and stability. Wet or slippery surfaces can greatly reduce traction and the ability to stop or turn. Carefully evaluate the s
Inhaltszusammenfassung zur Seite Nr. 19
Operation 4. Remove the self-locking cotter pin and washer (A, Figure 11) securing the front of each stabilizer rod (C) D to the rear mower deck brackets. Also remove the outer lock nut (B) securing the rear of each stabilizer rod to the mounting bolt on the transmission casing. Remove the stabilizer rods and retain all removed components. 5. Remove the hairpin clips and washers (D, Figure 11) securing the rear mower deck brackets to the rear lift arm rod swivels, and pull the swivels out from t
Inhaltszusammenfassung zur Seite Nr. 20
Regular Maintenance MAINTENANCE SCHEDULE & PROCEDURES The following schedule should be followed for normal care of your rider and mower.You will need to keep a record of your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter. SAFETY ITEMS Before Every 5 Every 25 Every Every Spring & Each Hours Hours 100 250 Fall Use Hours Hours Check Safety Interlock System Check Rider Brakes Check Mower Blade Stopping Time RID
