Inhaltszusammenfassung zur Seite Nr. 1
IMPORTANT MANUAL Do Not Throw Away
04040
OWNER'S MANUAL
WARNING:
MODEL:
Read this Man u al and follow all Warnings
and Safety Instructions. Fail ure to do so can
re sult in serious in ju ry.
PP16H36RB
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
532 42 87-61 05.12.09 TH Printed in U.S.A.
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Operate machine only in daylight or good artificial light. WARNING: In order to prevent ac- • Do not operate the machine while under the influence ci den tal starting when setting up, of alcohol or drugs. trans port ing, ad just ing or making re-
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment the presence of children. Children are often attracted to the ma chine and the mowing activity. Never assume that is in safe working condition. • Never tamper with safety devices. Check their proper children will remain where you last saw them. • Kee
Inhaltszusammenfassung zur Seite Nr. 4
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu fac tured to give you the best possible dependability and per for mance. Gasoline Capacity 2.0 Gallons and type: Unleaded Regular Should you experience any problem you cannot easily Oil Type (API-SG-SL): SAE 30 (above 32°F) remedy, please contact your nearest authorized service SAE 5W-30 (below 32°F) center. We have competent, well-trained tech ni cians and the proper
Inhaltszusammenfassung zur Seite Nr. 5
UNASSEMBLED PARTS Steering Wheel Insert Steering Boot Steering Wheel Adapter 5
Inhaltszusammenfassung zur Seite Nr. 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY INSERT A socket wrench set will make assembly easier. Stan dard wrench sizes are listed. 5/16 HEX BOLT (2) 7/16" wrenches Utility knife (1) 3/4" wrenches T
Inhaltszusammenfassung zur Seite Nr. 7
02591 ASSEMBLY • First connect RED battery cable to positive (+) ter- SEAT minal with hex bolt and keps nut as shown. Tighten securely. • Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely. SEAT PAN • Replace battery cover. Open battery cover for: SHOUL DER BOLT • Inspection for secure connections (to tighten hard- ware). • Inspection for corrosion. • Testing battery. • Jumping (if required). FLAT WASH ER • Periodic charging . 0246
Inhaltszusammenfassung zur Seite Nr. 8
02330 02277 03028 02306 ASSEMBLY • Replace discharge chute into rear opening of tractor. TO INSTALL BAGGER COM PO NENTS TO Secure the chute with the two hook straps. TRAC TOR (See Figs. 4A-4D) • Remove discharge chute from rear of tractor. Unhook CLEVIS PIN 10 X 17MM the two (2) straps and pull chute out and away from tractor. 3/8 LOCK NUT • Remove the two (2) 3/8 nuts and flat washers from the bolts at the tractor back plate. SUPPORT BRACKET DISCHARGE 10,3MM (13/32") CHUTE FLAT WAS
Inhaltszusammenfassung zur Seite Nr. 9
02983 A A 02214 ASSEMBLY • Install and carefully lower bagger to actuate latch. SPREADER BARS • Measure distance between bagger and latch as shown. RETAINER 6MM (1/4") - 9MM (3/8") SPRING VINYL BINDING TOP SURFACES HORIZONTAL EVEN ADJUSTMENT RETAINER SPRING BRACK ET VERTICAL FIG. 7 ADJUSTMENT BRACK ET Fig. 5B 02967 • Push cap over end of bagger dump handle. NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has become BAGG
Inhaltszusammenfassung zur Seite Nr. 10
ASSEMBLY ✓CHECKLIST CHECK TIRE PRESSURE BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE The tires on your tractor were overinflated at the factory WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- for shipping purposes. Correct tire pressure is important FORMANCE AND SATISFACTION FROM THIS QUALITY for best cutting performance. PRODUCT. • Reduce tire pressure to PSI shown on tires. PLEASE REVIEW THE FOLLOWING CHECKLIST: CHECK DECK LEVELNESS ✓ All assembly instructions have been com plet ed. For best
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. REVERSE HIGH LOW FAST SLOW NEUTRAL CHOKE IGNITION SWITCH P REVERSE ENGINE ON ENGINE START PARKING BRAKE ENGINE OFF PARKING BRAKE PARKING BRAKE OPERATION LOCKED UNLOCKED SYSTEM (ROS) OIL PRESSURE BATTERY OVER TEMP FUEL REVERSE FORWARD MOWER HEIGHT MOWER LIFT LIGHT 15 15 ATTACHMENT ATTACHMENT BRAKE/CLUTCH SLOPE HAZARDS CLUTCH ENGAGED KEEP AREA CLEAR CLUTCH DISENG
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. ROS "ON" POSITION IGNITION ATT ACH MENT SWITCH CLUTCH LEVER SERVICE REMINDER/ HOURMETER LIFT LEVER PLUNGER LIGHT SWITCH ATTACHMENT LIFT LEVER CLUTCH/BRAKE PEDAL THROTTLE/CHOKE CONTROL PARKING BRAKE MOTION CONTROL LEVER FREEWHEEL C
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your trac- tor or per form ing any adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses. 00155 NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine running, hot en gine exhaust gases may cause “brow
Inhaltszusammenfassung zur Seite Nr. 14
OPERATION • Adjust mower to desired cutting height (See “TO AD- REVERSE OPERATION SYSTEM (ROS) JUST MOWER CUT TING HEIGHT” in the Operation Your tractor is equipped with a Reverse Operation System sec tion of this manual). (ROS). Any attempt by the operator to travel in the reverse direc- • With mower in desired height of cut po si tion, gauge tion with the attachment clutch engaged will shut off the engine wheels should be assembled so they are slightly off unless ignition key is placed i
Inhaltszusammenfassung zur Seite Nr. 15
OPERATION • Do not push or tow tractor at more than two (2) MPH. CAUTION: Wipe off any spilled oil or • To reengage transmission, reverse above procedure. fuel. Do not store, spill or use gasoline NOTE: To protect hood from damage when transporting near an open flame. your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying IMPORTANT: WHEN OPERATING IN TEMPERATURES hood to tractor (rope, cord, etc.). BELOW32°F(0°C), USE FR
Inhaltszusammenfassung zur Seite Nr. 16
OPERATION • Place the motion control lever in neutral. MOWING TIPS Re lease the parking brake and let the clutch/brake • Mower should be properly leveled for best mowing per- slowly return to operating position. formance. See “TO LEVEL MOWER HOUSING” in the • Allow one minute for transmission to warm up. This Service and Adjustments section of this manual. can be done during the engine warm up period. • The left hand side of mower should be used for trim- • The attachments can also be use
Inhaltszusammenfassung zur Seite Nr. 17
02306 OPERATION TO DUMP BAGGER (See Fig.16) Your tractor is equipped with a Dump Bag Alarm. To turn off MULCHER PLUG the alarm disengage the attachment clutch switch. • Position tractor in location you wish to dump bag ger. • Place motion control lever in Neu tral po si tion and set parking brake. • Raise dump handle to its highest position. Pull handle forward to raise bagger and dump clippings. • To continue mowing, be sure bag ger is down and in proper operating po si tion which will a
Inhaltszusammenfassung zur Seite Nr. 18
maint_sch-tractore.ROS.e MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems R Check for Loose Fasteners A Check/Replace Mower Blades 3 C T Lubrication Chart 0 Check Battery Level 4 R Clean Battery and Terminals Check Transaxle Cooling Check Mower Levelness Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1
Inhaltszusammenfassung zur Seite Nr. 19
MAINTENANCE BLADE CARE (See Fig. 19) TRACTOR For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any main- bent or damaged blades. te nance. BRAKE OPERATION CAUTION: Use only a replacement blade If tractor requires more than five (5) feet to stop at highest approved by the manufacturer of your speed in high est gear on a level, dry concrete or paved tractor. Using a blade not approved surface, then brake must be checked and ad just ed
Inhaltszusammenfassung zur Seite Nr. 20
MAINTENANCE TRANSAXLE PUMP FLUID The transaxle was sealed at the factory and fluid main te - BLADE nance is not required for the life of the transaxle. Should MANDREL the transaxle ever leak or require servicing, contact your ASSEMBLY FLAT near est au tho rized ser vice center/department. WASHER LH BLADE BOLT ENGINE LEFT HAND 6 STAR PATTERN THREADED LUBRICATION 6 STAR CENTER HOLE LOCK Only use high quality detergent oil rated with API service WASHER TRAILING classification SG-SL. Sel
