Inhaltszusammenfassung zur Seite Nr. 1
MODEL NO. CN1842STA
18.0 HP 42 INCH
LAWN TRACTOR
Assembly
Operation
Maintenance
Service and Adjustments
Storage
Troubleshooting
Repair Parts
For Parts and Service, contact our authorized distributor:
call 1-800-849-1297 For Technical Assistance: call 1-800-829-5886
191603 02.27.04 TR
PRINTED IN U.S.A.
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Warranty ................................................ 2 Maintenance........................................ 16 Safety Rules .......................................... 3 Service and Adjustments..................... 20 Product Specifi cations........................... 6 Storage................................................ 25 Assembly/Pre-Operation ....................... 8 Troubleshooting ................................... 26 Operation.....................................
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY RULES IMPORTANT: This cutting machine is ca pa ble of amputating hands and feet and throw- ing objects. Failure to observe the fol low ing safety instructions could result in serious injury or death. • Be aware of the mower discharge direc- WARNING: In order to prevent ac- tion and do not point it at anyone. Do ci den tal starting when setting up, trans- not operate the mower without either port ing, ad just ing or making repairs, the entire grass catcher or the guard in always
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY RULES • Watch for holes, ruts, or bumps. Un- • Use extra care when approaching blind even terrain could overturn the machine. corners, shrubs, trees, or other objects Tall grass can hide ob sta cles. that may obscure vision. • Use slow speed. Choose a low gear IV. SERVICE so that you will not have to stop or shift • Use extra care in handling gasoline and while on the slope. other fuels. They are fl ammable and • Follow the manufacturer’s rec om men d- vapors are explosive. a tion
Inhaltszusammenfassung zur Seite Nr. 5
SAFETY RULES • Remove obstacles such as rocks, tree • Be sure the area is clear of other people limbs, etc. before mowing. Stop machine if anyone • Watch for holes, ruts, or bumps. Uneven enters the area. terrain could overturn the machine. Tall • Never carry passengers or children grass can hide obstacles. even with the blades off. • Use slow speed. Choose a low gear • Do not mow in reverse unless ab so - so that you will not have to stop or shift lute ly necessary. Al ways look down an
Inhaltszusammenfassung zur Seite Nr. 6
PRODUCT SPECIFICATIONS CUSTOMER RE SPON SI BIL I TIES • Read and observe the safety rules. Gasoline 1.25 • Follow a regular schedule in main- Capacity and Unleaded tain ing, caring for and using your tractor. Type: Regular • Follow the instructions under “Main te - Oil Type SAE 30 (above 32°F) nance” and “Stor age” sec tions of this (API-SF-SJ): SAE 5W-30(below 32°F) own er’s manual. WARNING: This tractor is equipped Oil Capacity: W/Filter: 3.5 Pints with an internal combustion engine an
Inhaltszusammenfassung zur Seite Nr. 7
UNASSEMBLED PARTS Steering Wheel Steering Wheel Insert (1) Hex nut 1/2-20 (1) Large Flat Washer Steering (1) Locknut (1) Hex Bolt 1/4-28 x 1-1/4 Extension 1/4-28 Shaft Steering Wheel Steering Adapter Boot Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge (1) Lock Washer 1/2 (1) Bolt Slope Sheet (1) Oil Drain Tube For Future Use Keys (2) Keys 7
Inhaltszusammenfassung zur Seite Nr. 8
ASSEMBLY/PRE-OPERATION Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you as sem ble must be tightened securely. Use the correct tools as nec es sary to in sure proper tightness. Review the video cassette before you begin. TOOLS REQUIRED FOR Insert ASSEMBLY 1/2 Hex Nut A socket wrench set will make assembly Large Flat easier. Stan dard wr
Inhaltszusammenfassung zur Seite Nr. 9
4. Push down on seat to engage shoulder NOTE: You may now roll or drive your bolt in slot and pull seat towards rear of tractor off the skid. Follow the ap pro pri ate tractor. instruction below to remove the tractor 5. Pivot seat and pan forward and as- from the skid. sem ble adjustment bolt, lockwasher TO ROLL TRACTOR OFF SKID (See and fl at washer loosely. Do not tighten. Op er a tion section for location and 6. Lower seat into operating position and function of con trols) sit in s
Inhaltszusammenfassung zur Seite Nr. 10
INSTALL MULCHER PLATE CHECK DECK LEVELNESS For best cutting results, mower hous- (If previously removed) ing should be properly leveled. See “TO 1. Raise and hold defl ector shield in LEVEL MOWER HOUSING” in the Service up right po si tion. and Adjustments section of this manual. 2. Place front of mulcher plate over front CHECK BRAKE SYSTEM of mower deck open ing and slide into place, as shown. After you learn how to operate your trac- 3. Hook front latch into hole on front of tor, check
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE HIGH LOW FAST SLOW IGNITION NEUTRAL CHOKE P LIGHTSON ENGINEON ENGINESTART PARKINGBRAKE PARKINGBRAKE PARKINGBRAKE ENGINEOFF LOCKED UNLOCKED OILPRESSURE BATTERY OVERTEMP FUEL REVERSE FORWARD MOWERHEIGHT MOWERLIFT LIGHT 15 15 ATTACHMENT ATTACHMENT SLOPEHAZARDS CLUTCHENGAGED DANGER,KEEPHANDS KEEPAREACLEAR CLUTCHDISENGAGED ANDFEETAWAY (SEESAFETYRULESSECTION) DANG
Inhaltszusammenfassung zur Seite Nr. 12
KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Ignition Switch Attachment Light Switch Position Clutch Lever Ammeter Lift Lever Plunger Throttle/Choke Control Attachment Lift Lever Clutch/ Brake Pedal Parking Brake Lever Gearshift Lever Our tractors conform to the safety standards of
Inhaltszusammenfassung zur Seite Nr. 13
The op er a tion of any trac tor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Al ways wear safety glass es or eye shields while op erat ing your trac tor or per forming an y ad just ments 00155 or repairs. We rec om mend a wide vi sion safe ty mask over spec ta cles or stan dard safety glass es. IMPORTANT: Leaving the ignition switch in HOW TO USE YOUR TRAC TOR any position other than "STOP" will cause TO SET PARKING BRAKE the battery to
Inhaltszusammenfassung zur Seite Nr. 14
• For best cutting performance, grass TO TRANSPORT over 6 inches in height should be • Raise attachment lift to highest position mowed twice. Make the fi rst cut rela- with at tach ment lift control. tively high; the second to desired height. • When pushing or towing your trac tor, be sure gearshift lever is in neutral (N) TO OPERATE MOWER position. Your tractor is equipped with an operator • Do not push or tow tractor at more than presence sensing switch. Any attempt fi ve (5) MPH. by t
Inhaltszusammenfassung zur Seite Nr. 15
• The attachments can also be used dur- CAUTION: Alcohol blended fuels ing the engine warm-up period. (called gasohol or using ethanol or metha- NOTE: If at a high altitude (above 3000 nol) can attract moisture which leads to feet) or in cold temperatures (below 32 F) separation and for ma tion of acids during the carburetor fuel mixture may need to storage. Acidic gas can damage the fuel be adjusted for best engine performance system of an engine while in storage. To (see “TO ADJ
Inhaltszusammenfassung zur Seite Nr. 16
maint_sch-tractore.new1 MAINTENANCE MAINTENANCESCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE SERVICE DATES Check Brake Operation Check Tire Pressure Check Operator Presence and Interlock Systems T R Check for Loose Fasteners 5 A Sharpen/Replace Mower Blades 3 C Lubrication Chart T Check Battery Level 4 0 Clean Battery and Terminals R Check Transaxle Cooling Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1,2 Change Engine Oil (without oil filter) 1,2 E Clean Air
Inhaltszusammenfassung zur Seite Nr. 17
01202 4. Reassemble blade bolt, lock washer TRACTOR and fl at washer in exact order as Always observe safety rules when per- shown. fo rming an y main te nance. 5. Tighten blade bolt securely (27-35 Ft. BRAKE OPERATION Lbs. torque). If tractor requires more than six (6) feet IMPORTANT: Blade bolt is heat treated. stopping distance at high speed in high est If bolt needs replacing, replace only with gear, then brake must be ad just ed. (See approve bolt shown in the Repair Parts. “TO A
Inhaltszusammenfassung zur Seite Nr. 18
NOTE: The original equipment battery on TO CHANGE ENGINE OIL your tractor is maintenance free. Do not Determine temperature range expected attempt to open or remove caps or cov ers. before oil change. All oil must meet API Adding or checking level of elec tro lyte is service classifi cation SF-SJ. not necessary. • Be sure tractor is on level surface. • Oil will drain more freely when warm. TO CLEAN BATTERY AND TER MI NALS • Catch oil in a suitable container. Corrosion and dirt on the batte
Inhaltszusammenfassung zur Seite Nr. 19
00667 MUFFLER CLEANING Inspect and replace corroded muffl er and • Clean engine, battery, seat, fi nish, etc. spark arrester (if equipped) as it could cre- of all foreign matter. ate a fi re hazard and/or dam age. • Keep fi nished surfaces and wheels free of all gasoline, oil, etc. SPARK PLUG(S) • Protect painted surfaces with au to - Replace spark plug(s) at the beginning mo tive type wax. of each mowing season or after every We do not recommend using a garden 100 hours of operation, whic
Inhaltszusammenfassung zur Seite Nr. 20
SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER- VICE OR AD JUST MENTS: 1. Depress clutch/brake pedal fully and set parking brake. 2. Place gearshift lever in neutral (N) position. 3. Place attachment clutch in “DISENGAGED” position. 4. Turn ignition key to “STOP” and remove key. 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
