Inhaltszusammenfassung zur Seite Nr. 1
IMPORTANT MANUAL Do Not Throw Away
02227_PL_LT_CRD
OWNER'S MANUAL
WARNING:
MODEL:
Read this Manu al and follow all Warnings and
Safety Instructions. Fail ure to do so can re sult
in serious in ju ry.
PP16H36RB
LAWN TRACTOR
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
407139 Rev. 1 05.25.06 rad/TR
Printed in U.S.A.
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. � Operate machine only in daylight or good artifi cial light. WARNING: In order to prevent ac- � Do not operate the machine while under the infl uence ci den tal starting when setting up, of alcohol or drugs. trans port ing, ad just ing or makin
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY RULES Safe Operation Practices for Ride-On Mowers III. CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to � Never operate machine in a closed area. � Keep all nuts and bolts tight to be sure the equipment the presence of children. Children are often attracted to the ma chine and the mowing activity. Never assume that is in safe working condition. � Never tamper with safety devices. Check their proper children will remain where you last saw th
Inhaltszusammenfassung zur Seite Nr. 4
CONGRATULATIONS on your purchase of a new tractor. PRODUCT SPECIFICATIONS It has been designed, engineered and manu fac tured to give you the best possible dependability and per formance . Gasoline Capacity 2.0 Gallons and type: Unleaded Regular Should you experience any problem you cannot easily Oil Type (API-SG-SL): SAE 30 (above 32°F) remedy, please contact your nearest authorized service SAE 5W-30 (below 32°F) center. We have competent, well-trained tech ni cians and the proper
Inhaltszusammenfassung zur Seite Nr. 5
UNASSEMBLED PARTS Steering Wheel Seat (1) Washer 17/32 x 1-3/16 x 12 Gauge Steering Wheel Adapter (1) Knob Steering Wheel Battery Insert (2) Keps Nut 1/4-20 (2) Hex Bolts 1/4-20 x 3/4 Steering Boot (1) 5/16 (1) Oil Drain Tube Lock Washer For Future Use Key (2) Keys Steering Slope Sheet Extension Shaft (1) Large Flat Washer (1) Hex Bolt 5/16-18 x 4 5
Inhaltszusammenfassung zur Seite Nr. 6
ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Stan dard INSERT wrench sizes are listed. 5/16 HEX (2) 7/16" wrenches Utility knife BOLT (1) 3/4" wrenches T
Inhaltszusammenfassung zur Seite Nr. 7
02591 ASSEMBLY � First connect RED battery cable to positive (+) ter- SEAT minal with hex bolt and keps nut as shown. Tighten securely. � Connect BLACK grounding cable to negative (-) ter- minal with remaining hex bolt and keps nut. Tighten securely. SEAT PAN � Replace battery cover. Open battery cover for: SHOUL DER BOLT � Inspection for secure connections (to tighten hard- ware). � Inspection for corrosion. � Testing battery. � Jumping (if required). FLAT WASH ER �
Inhaltszusammenfassung zur Seite Nr. 8
02330 02277 03028 02306 ASSEMBLY � Sit on seat in operating position, depress clutch/brake � Replace discharge chute into rear opening of tractor. pedal and set the parking brake. Secure the chute with the two hook straps. � Place motion control lever in neutral (N) position. � Press lift lever plunger and raise attachment lift lever CLEVIS PIN 10 X 17MM to its highest position. � Remove key from bag and start the engine (see "TO 3/8 LOCK NUT START ENGINE" in the Operation sec
Inhaltszusammenfassung zur Seite Nr. 9
02983 A A 02214 ASSEMBLY � Install and carefully lower bagger to actuate latch. SPREADER BARS � Measure distance between bagger and latch as shown. RETAINER 6MM (1/4") - 9MM (3/8") SPRING VINYL BINDING TOP SURFACES HORIZONTAL EVEN ADJUSTMENT RETAINER SPRING BRACK ET VERTICAL FIG. 7 ADJUSTMENT BRACK ET FIG. 5B 02967 � Push cap over end of bagger dump handle. NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has bec
Inhaltszusammenfassung zur Seite Nr. 10
ASSEMBLY ✓CHECKLIST CHECK TIRE PRESSURE BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE The tires on your tractor were overinfl ated at the factory WISH TO ASSURE THAT YOU RECEIVE THE BEST PER- for shipping purposes. Correct tire pressure is important FORMANCE AND SATISFACTION FROM THIS QUALITY for best cutting performance. PRODUCT. � Reduce tire pressure to PSI shown on tires. PLEASE REVIEW THE FOLLOWING CHECKLIST: CHECK DECK LEVELNESS ✓ All assembly instructions have been com plet ed. For b
Inhaltszusammenfassung zur Seite Nr. 11
OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their mean- ing. REVERSE HIGH LOW FAST SLOW NEUTRAL CHOKE IGNITION SWITCH P REVERSE ENGINE ON ENGINE START PARKING BRAKE ENGINE OFF PARKING BRAKE PARKING BRAKE OPERATION LOCKED UNLOCKED SYSTEM (ROS) OIL PRESSURE BATTERY OVER TEMP FUEL REVERSE FORWARD MOWER HEIGHT MOWER LIFT LIGHT 15 15 ATTACHMENT ATTACHMENT BRAKE/CLUTCH SLOPE HAZARDS CLUTCH ENGAGED KEEP AREA CLEAR CLUTCH DISENGAGE
Inhaltszusammenfassung zur Seite Nr. 12
OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. ROS "ON" POSITION IGNITION AT TACHMENT SWITCH CLUTCH LEVER SERVICE REMINDER/ HOURMETER LIFT LEVER PLUNGER LIGHT SWITCH ATTACHMENT LIFT LEVER CLUTCH/BRAKE PEDAL THROTTLE/CHOKE CONTROL PARKING BRAKE MOTION CONTROL LEVER FREEWHEEL C
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your trac- tor or per forming an y adjustments or repairs. We rec om mend a wide vision safety mask over spectacles or stan dard safety glasses. 00155 NOTE: Under certain conditions when tractor is standing HOW TO USE YOUR TRACTOR idle with the engine running, hot en gine exhaust gases may cause “brow
Inhaltszusammenfassung zur Seite Nr. 14
OPERATION � Adjust mower to desired cutting height (See “TO AD- REVERSE OPERATION SYSTEM (ROS) JUST MOWER CUT TING HEIGHT” in the Operation Your tractor is equipped with a Reverse Operation System sec tion of this manual). (ROS). Any attempt by the operator to travel in the reverse direc- � With mower in desired height of cut po si tion, gauge tion with the attachment clutch engaged will shut off the engine wheels should be assembled so they are slightly off unless ignition key is pl
Inhaltszusammenfassung zur Seite Nr. 15
OPERATION � Do not push or tow tractor at more than two (2) MPH. CAUTION: Wipe off any spilled oil or � To reengage transmission, reverse above procedure. fuel. Do not store, spill or use gasoline NOTE: To protect hood from damage when transporting near an open fl ame. your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying IMPORTANT: WHEN OPERATING IN TEMPERATURES hood to tractor (rope, cord, etc.). BELOW32°F(0°C),
Inhaltszusammenfassung zur Seite Nr. 16
OPERATION � Place the motion control lever in neutral. MO WING TIPS Re lease the parking brake and let the clutch/brake � Mower should be properly leveled for best mowing per- slowly return to operating position. formance. See “TO LEVEL MOWER HOUSING” in the � Allow one minute for transmission to warm up. This Service and Adjustments section of this manual. can be done during the engine warm up period. � The left hand side of mower should be used for trim- � The attachments ca
Inhaltszusammenfassung zur Seite Nr. 17
02306 OPERATION TO DUMP BAGGER (See Fig.16) Your tractor is equipped with a Dump Bag Alarm. To turn off MULCHER PLUG the alarm disengage the attachment clutch switch. � Position tractor in location you wish to dump bag ger. � Place motion control lever in Neu tral po si tion and set parking brake. � Raise dump handle to its highest position. Pull handle forward to raise bagger and dump clippings. � To continue mowing, be sure bag ger is down and in proper operating po si tion whic
Inhaltszusammenfassung zur Seite Nr. 18
maint_sch-tractore.ROS.e MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH 8 25 50 100 SEASON STORAGE SCHEDULE USE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure T Check Operator Presence & ROS Systems R Check for Loose Fasteners A Check/Replace Mower Blades 3 C T Lubrication Chart 0 Check Battery Level 4 R Clean Battery and Terminals Check Transaxle Cooling Check Mower Levelness Check V-Belts Check Engine Oil Level Change Engine Oil (with oil filter) 1
Inhaltszusammenfassung zur Seite Nr. 19
MAINTENANCE BLADE CARE (See Fig. 19) TRACTOR For best results mower blades must be kept sharp. Re place Always observe safety rules when per forming an y main- bent or damaged blades. te nance. BRAKE OPERATION CAUTION: Use only a replacement blade If tractor requires more than fi ve (5) feet to stop at highest approved by the manufacturer of your speed in high est gear on a level, dry concrete or paved tractor. Using a blade not approved surface, then brake must be checked and ad just ed
Inhaltszusammenfassung zur Seite Nr. 20
MAINTENANCE TRANSAXLE PUMP FLUID The transaxle was sealed at the factory and fl uid main te - BLADE nance is not required for the life of the transaxle. Should MANDREL the transaxle ever leak or require servicing, contact your ASSEMBLY FLAT near est au tho rized service center/depar tment. WASHER LH BLADE BOLT ENGINE LEFT HAND 6 STAR PATTERN THREADED LUBRICATION 6 STAR CENTER HOLE LOCK Only use high quality detergent oil rated with API service WASHER TRAILING classifi cation SG-SL. Sel
