Inhaltszusammenfassung zur Seite Nr. 1
Model
405030x48A
This Instruction Book contains information for several models.
Read and keep this book for future reference.
This book contains important information on
SAFETY, ASSEMBLY, OPERATION, AND MAINTENANCE.
PRODUCT INFORMATION
The owner must be certain that all
the product information is included with the unit.
This information includes
the INSTRUCTION BOOKS,
the REPLACEMENT PARTS and the WARRANTIES.
This information must be included to make sure state laws and other laws
are followed.
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS MAINTENANCE CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HOW TO CHECK THE MUFFLER . . . . . . . . . . . . . . . . . . . . . . . . . 19 RESPONSIBILITY OF THE OWNER . . . . . . . . . . . . . . . . . . 3 HOW TO REMOVE AND INSTALL THE BLADE . . . . . . . . . . . . 20 SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 HOW TO SHARPEN
Inhaltszusammenfassung zur Seite Nr. 3
OWNER’S INFORMATION This instruction book is for several different models. The instructions are written for a person with some mechanical ability. Like most ser- vice books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical Engine Exhaust, some of its constituents, and ability. Read and follow these instructions before you use the unit. certain vehicle components contain or emit Know your product: If you understand the u
Inhaltszusammenfassung zur Seite Nr. 4
OWNER’S INFORMATION b. Limit loads to those you can safely control. c. Do not turn sharply. Use care when backing. d. Use counterweights or wheel weights when suggested in the Instruction Book. 19. Do not operate this machine if you are taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine. 20. Do not use this machine if you are mentally or physically unable to operate this machine safely. 21. Data indicates that operators, age 60 years and
Inhaltszusammenfassung zur Seite Nr. 5
SAFE MOWING GUIDE Each person that operates power controls and how they work. In an equipment must learn to use correct and emergency, how fast you can stop the safe mowing procedures. To help you blade is important. Learn how to control learn, carefully read the following the mower at all times. pages. Most of the time the operator was Many engines are started by hand. When not correctly shown or did not read the you use a pull start or rope start, place instructions on the unit or in the Instr
Inhaltszusammenfassung zur Seite Nr. 6
SAFE MOWING GUIDE mower was completely assembled at the of the mower. Stop the engine. Let the When you mow, remember that children store, you must still check the mower engine and transmission cool before are attracted to the mower. Always use according to the assembly instructions. servicing the mower. Remember, exhaust caution when mowing around obstacles Make sure the mower is correctly fumes are dangerous. Never operate the like trees or shrubs or when moving assembled and that all fastener
Inhaltszusammenfassung zur Seite Nr. 7
SAFE MOWING GUIDE Also, the grass bagger will function better feel new or excessive vibration, a blade that is not sharp or at a slow when the engine is operating at maximum immediately stop the engine and check for engine speed you can damage the grass. speed. On slopes, decrease the ground the problem. Vibration can be a warning of Move the throttle control to the FAST speed and use care making sure the a problem. Keep all nuts, bolts and screws position when mowing and using the grass mower f
Inhaltszusammenfassung zur Seite Nr. 8
STEPS TO FOLLOW BEFORE MOWING Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes. Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. Fill the fuel tank outside. Clean off spilled fuel. Read and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others. Exhaust fumes are dangerous. Start
Inhaltszusammenfassung zur Seite Nr. 9
INTERNATIONAL PICTORIALS INTERNATIONAL PICTORIALS IMPORTANT: Some of the following pic- 5 Flush Eyes Immediately With Water. 10 DANGER: No Step. torials are located on your unit or on Get Medical Help Fast. 11 DANGER: Keep Feet And Hands literature supplied with the product. Be- 6 IMPORTANT: Read Owner’s Manual Away From Rotating Blade. fore you operate the unit, learn and un- Before Operating This Machine. 12 DANGER: Keep Hands Away From derstand the purpose for each pictorial. Rotating Blade.
Inhaltszusammenfassung zur Seite Nr. 10
ASSEMBLY ASSEMBLY WARNING: Before doing any assembly or mainte- nance to the mower, remove the wire from the spark This instruction book is for several models. Some parts or accesso- plug. ries are not included on all models. Read and follow the assembly and adjustment instructions for your mower. All fasteners are in the parts bag. Do not discard any parts or material until the unit is NOTE: In this instruction book, left and right describe the loca- assembled. tion of a part with the operator
Inhaltszusammenfassung zur Seite Nr. 11
ASSEMBLY HOW TO INSTALL THE SEAT Use the fasteners shown below to install the seat. The fasteners are 3. Check the operating position of the seat. If the seat needs to shown at full size. be adjusted, loosen the two wing bolts. Slide the seat forward or backward along the seat adjusting holes as shown. Tighten the wing bolts (A). Seat Seat Hinge Seat Adjusting Hole (B) (A) 1001054 17x47 B A 1. Carefully remove the plastic bag from the seat. 2. Align the holes in the seat hinge to the holes in
Inhaltszusammenfassung zur Seite Nr. 12
ASSEMBLY MAINTENANCE FREE BATTERY HOW TO CHARGE THE MAINTENANCE FREE BATTERY IMPORTANT: Before you attach the battery cables to the WARNING: When you charge the battery, do not battery, check the battery date. The battery date tells if the smoke. Keep the battery away from any sparks. The battery must be charged. fumes from the battery acid can cause an explosion. 1. Check the top of the battery for the location of the battery date 1. Remove the battery and battery tray. (Figure 3). 2. Remove th
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION Blade Rotation Control Throttle Control Lever Clutch / Brake Pedal Shift Lever Lift Lever Figure 4 LOCATION OF CONTROLS BLADE ROTATION CONTROL: Use the blade rotation SHIFT LEVER: Use the shift lever to change the speed of the control to start and stop the rotation of the blade. unit. CLUTCH / BRAKE PEDAL: The pedal has two functions. LIFT LEVER: Use the lift lever to change the height of cut. The first function is a clutch. The second function is a brake. HEADLIGHT SWITCH: The headli
Inhaltszusammenfassung zur Seite Nr. 14
OPERATION ATTACHMENTS Disengage This unit can use many different attachments. See the attachment Position page in this book. This unit can pull attachments like a lawn sweeper, a lawn aerator, a hopper spreader or a small trailer. This unit can not use attachments that engage the ground like a plow, a disk harrow, or a cultivator. For trailer and pull-behind attachments or trailers, the maximum Blade Rotation Control Engage Position gross weight is 250 pounds. Gross weight is the weight of the a
Inhaltszusammenfassung zur Seite Nr. 15
OPERATION HOW TO SET THE PARKING BRAKE 1. Completely push the clutch/brake pedal forward. 2. Lift the parking brake lever (Figure 6). 3. Remove your foot from the clutch/brake pedal and then release the parking brake lever. Make sure the parking brake will hold the unit. 4. To release the parking brake, completely push the clutch/brake pedal forward. The parking brake will automatically release. WARNING: Before you leave the operator’s position, move the shift lever to the neutral (N) position
Inhaltszusammenfassung zur Seite Nr. 16
OPERATION HOW TO OPERATE WITH THE MOWER HOUSING WARNING: The deflector is a safety device. Do not re- 4. Slowly move the blade rotation control to the ENGAGE move the deflector. The deflector forces the dis- position. charged material toward the ground. Always keep the 5. Push the clutch/brake pedal completely forward. deflector in the down position. If the deflector is dam- aged, replace the deflector with an original equipment 6. Move the shift lever to one of the speed settings. part from an
Inhaltszusammenfassung zur Seite Nr. 17
OPERATION CAUTION: A mixture of alcohol (ethanol or methanol) and BEFORE STARTING THE ENGINE gasoline (called gasohol), will attract moisture and cause acid deposits during storage. While the unit is in storage, the acids CHECK THE OIL in the fuel can damage the fuel system. NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed. See the engine To prevent engine problems with the fuel system, empty the fuel manufacturer’s instructions for the
Inhaltszusammenfassung zur Seite Nr. 18
OPERATION OPERATING TIPS 1. Check the blade rotation control for correct adjustment. For the 5. Before you make an inspection, adjustment (except for the car- blade(s) to disengage correctly, the adjustment must be cor- buretor) or repair, make sure the wire from the spark plug is dis- rect. connected. 2. Before you use the unit, check the oil in the engine and add oil 6. For longer life of the battery on electric start models, charge the if necessary. battery every three months. 3. If the engin
Inhaltszusammenfassung zur Seite Nr. 19
MAINTENANCE MAINTENANCE CHART FIRST EVERY EVERY EVERY 2 25 50 100 EACH BEFORE PROCEDURE HOURS HOURS HOURS HOURS USE STORAGE Blade, Inspect and Sharpen √ Blade Rotation Control, Check √ Brake, Check M M √ O Clutch, Check √ W W Tires, Check √ √ E E R Battery, Check and Charge √ √ Battery, Clean √ √ Lubrication * √ √ * Dusty conditions every 25 hours. GENERAL RECOMMENDATIONS 1. The owner’s responsibility is to maintain this product. This will WARNING: Before you make an inspection, adjust- m
Inhaltszusammenfassung zur Seite Nr. 20
MAINTENANCE 9. Tighten the nut that holds the blade to a torque of 35 foot INSPECT BLADE pounds (47,5 N-m). WARNING: Before you inspect or remove the blade, 10. Install the mower housing. See “How To Install The Mower disconnect the wire to the spark plug. If the blade hits an object, stop the engine. Check the unit for dam- Housing”. age. The blade has sharp edges. When you hold the blade, use gloves or cloth material to protect your hands. If you keep the blade sharp and inspect the blade
