Inhaltszusammenfassung zur Seite Nr. 1
Operator´smanual
Z4218/968999281
Z4219/968999511
Z4824/968999512
Z5426/968999508
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
English
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
OPERATOR’S MANUAL RIDER Z SERIES Moving by Hand ..................................................... 33 Contents Maintenance ......................................................... 34 Contents...................................................................1 Maintenance Schedule...................................... 34 Introduction .............................................................3 Battery............................................................... 36 Congratulations.........
Inhaltszusammenfassung zur Seite Nr. 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) by all who operate this machine can considerably increase the lifespan of your mach
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the f
Inhaltszusammenfassung zur Seite Nr. 7
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publi
Inhaltszusammenfassung zur Seite Nr. 8
SYMBOLS AND DECALS Read Shut off engine Keep a safe Use on No Operators & remove key distance from slopes no passengers Manual before the machine. greater performing any than 10°. maintenance or repair work. Whole Severing Do not open Careful Careful going body of fingers or remove backing up, forward, exposure & toes. safety watch for watch for to thrown shields while other people. other people. objects. engine is running. Moving sharp blades under cover English-6
Inhaltszusammenfassung zur Seite Nr. 9
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manu
Inhaltszusammenfassung zur Seite Nr. 10
SAFETY INSTRUCTIONS • Disengage blades when not mowing. Shut off engine and wait for all parts to WARNING! come to a complete stop before cleaning Engine exhaust and certain the machine, removing the grass vehicle components contain catcher, or unclogging the discharge or emit chemicals considered guard. to cause cancer, birth defects, • Operate machine only in daylight or good or other reproductive system artificial light. damage. The engine exhaust contains carbon monoxide, • Do n
Inhaltszusammenfassung zur Seite Nr. 11
SAFETY INSTRUCTIONS Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. Always wear protecti
Inhaltszusammenfassung zur Seite Nr. 12
SAFETY INSTRUCTIONS • Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine. Do not use on steep slopes. • Do not try to stabilize the machine by putting your foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in. Children 8011-519 Tragic accidents can occur if the operator is Be extra cautious when driving on
Inhaltszusammenfassung zur Seite Nr. 13
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel wit
Inhaltszusammenfassung zur Seite Nr. 14
SAFETY INSTRUCTIONS the sun may otherwise cause the fuel to expand and overflow. General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. 8011-515 Never drive t
Inhaltszusammenfassung zur Seite Nr. 15
SAFETY INSTRUCTIONS • Acid in the eyes can cause blindness, contact a doctor immediately. • Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage. • Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. 6003-009 • Do no
Inhaltszusammenfassung zur Seite Nr. 16
SAFETY INSTRUCTIONS run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. Only use approved repair parts for the machine. • The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. • Check the parking brake’s functionality regularly. Adjust and servic
Inhaltszusammenfassung zur Seite Nr. 17
SAFETY INSTRUCTIONS Customer responsibilities • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your mower. • Follow the instructions under "Maintenance” and "Storage” sections of this owner’s manual. • This machine has no brain. Use yours! WARNING! This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, bush-covered or grass-covered land unless the engine’s exhaust system
Inhaltszusammenfassung zur Seite Nr. 18
CONTROLS Controls This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs and Stratton four-stroke engine developing 22-24 horse power. Transmission from the engine is made via two belt-driven hydrostat transaxles, one for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. 8011-648 Zero Turn Rider 12 11 10 9 8 7 6 5 1 23 4 8011-735 Locations of the controls Control Locations Pag
Inhaltszusammenfassung zur Seite Nr. 19
CONTROLS 1. Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forwa
Inhaltszusammenfassung zur Seite Nr. 20
CONTROLS 2. Seat adjustment knobs The seat can be adjusted lengthways. When making adjustments, loosen the four knobs under the seat pan, after which the seat can be moved backward or forward. Do not forget to tighten the knobs. CZ-1 Lengthways adjustment 3. Fuses The fuses are located in the right front corner of the engine compartment. They are flat pin fuses of the same type used in automobiles. There are two fuses. Fuse ratings and functions: • 20 A, Primary fuse. • 7.5 A, Mower deck
