Inhaltszusammenfassung zur Seite Nr. 1
Operator Manual
PZ5426 FX / 966060901 PZ6030CV / 966061101
PZ6029FX / 966061201 PZ7234FX / 966061401
PZ6029PFX / 966062201 PZ6034FX / 966516801
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
English
Inhaltszusammenfassung zur Seite Nr. 2
In order to implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the manufacturer. Modifications to the unit may cause unsafe operations or damage the unit. When this product is worn out and no lon
Inhaltszusammenfassung zur Seite Nr. 3
CoNTENTS INTRoDUCTIoN ......................................................5 operating on Hills ............................................36 Driving and Transport on Public Roads .............5 Stopping the Engine .........................................37 Towing ................................................................5 Mowing Tips .....................................................38 operating ...........................................................5 Manual Transport...........
Inhaltszusammenfassung zur Seite Nr. 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION Congratulations Towing Thank you for purchasing a Husqvarna ride-on If machine is equipped with a tow hitch, use extreme mower. This machine is built for superior efficiency caution when towing. Never allow children or others in to rapidly mow primarily large areas. A control panel or on the towed equipment. Make wide turns to avoid easily accessible to the operator and a hydrostatic jack-knifing. Travel slowly and allow extra distance to transmission regulated by steering contr
Inhaltszusammenfassung zur Seite Nr. 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer. See the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the fo
Inhaltszusammenfassung zur Seite Nr. 7
symbOls aND DeCals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. xxxxxx. Used in this publication to notify the reader of a risk Used in this publication to notify the reader of a risk of material damage, particularly if the reader should o
Inhaltszusammenfassung zur Seite Nr. 8
symbOls aND DeCals Read Shut off engine and Keep a safe Use on slopes No passengers operator’s remove key before distance from no greater Manual performing any the machine than 10° maintenance or repair work Whole body Severing of fingers Do not open or Careful backing up, Careful going exposure to and toes remove safety watch for other forward, watch for thrown objects shields while people other people engine is running Moving sharp blades under cover 8
Inhaltszusammenfassung zur Seite Nr. 9
saFeTy Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. IMPORTANT: THIS CUTTING MACHINE IS CAPABLE oF AMPUTATING HANDS AND FEET AND THRoWING oBJECTS. FAILURE To oBSERVE THE FoLLoWING SAFETY INSTRUCTIoNS CoULD RESULT IN SERIoUS INJURY oR DEATH. General Operation • Read, understand, and follow all instructions on the machine and in the manual before star
Inhaltszusammenfassung zur Seite Nr. 10
saFeTy • Watch for traffic when operating near or crossing roadways. • Use extra care when loading or unloading the machine into a trailer or truck. • Always wear eye protection when operating machine. • Data indicates that operators age 60 years and above are involved in a large percentage of riding mower-related injuries. These operators should evaluate their ability to operate the riding mower safely enough to protect themselves and others from serious injury. • Follow the manufacture
Inhaltszusammenfassung zur Seite Nr. 11
saFeTy Personal Safety Equipment WARNING! When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment. • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or
Inhaltszusammenfassung zur Seite Nr. 12
saFeTy Children Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain out of the path of danger. • Keep children out of the mowing area and in the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind and down for small children. • Never carry c
Inhaltszusammenfassung zur Seite Nr. 13
saFeTy WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Safe Handling of Gasoline To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. • Extinguish all cigarettes, cigars, pipes, and other sources of ignition. • Use only approved gasoline container. • Never remove gas cap or add fuel with the engine running. All
Inhaltszusammenfassung zur Seite Nr. 14
saFeTy Safe Handling of Propane WARNING! To avoid personal injury or property damage, use Propane, either liquid or vapor, extreme care in handling propane cylinders. Propane is extremely cold. Use protective is extremely flammable and the vapors are explosive. gloves when venting, refilling or • Extinguish all cigarettes, cigars, pipes, and other exchanging cylinders. sources of ignition. • Have propane cylinders filled at an authorized facility by trained personnel. • When transporting
Inhaltszusammenfassung zur Seite Nr. 15
saFeTy General Maintenance • Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the equipment is in safe working condition. • Never tamper with safety devices. Check their proper operation regularly. • Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage and remove any fuel-soaked debris. Allow machine to cool before storing. • If the machine strikes a foreign object, stop and inspect the machine. Repair, if necessary, befo
Inhaltszusammenfassung zur Seite Nr. 16
saFeTy • Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, fire or eye injury. Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery. • Use protective goggles. • Ensure that the fuel filler cap is mounted tightly and no flammable substances are stored in an open vessel. • Never work with the starter circuit if there is spilled fuel. WARNING! Avoid
Inhaltszusammenfassung zur Seite Nr. 17
saFeTy Transport WARNING! • The machine is heavy and can cause serious Escaping hydraulic oil under crushing injuries. Be extra cautious when it is pressure can have sufficient force loaded on or unloaded from a vehicle or trailer. to penetrate the skin, causing • Use an approved trailer to transport the machine. serious injury. If injured by escaping Activate the parking brake, turn off the fuel supply, fluid, see a doctor at once. Serious and fasten the machine with approved fastening
Inhaltszusammenfassung zur Seite Nr. 18
saFeTy Rollover Protection System (ROPS) WARNING! The RoPS increases the basic weight of the unit by 73 The rollover protection system's lbs/33 kg. capabilities may be impaired by • Do not use RoPS as a lifting, attaching or damage if the mower is overturned anchoring point. or if alteration to the ROPS occurs. If • Do not use RoPS for wrecking or towing. these conditions take place, the total • Do not exceed Max GVW: 2822 lbs/1283 kg. structure MUST be replaced. • Read machine’s operator
Inhaltszusammenfassung zur Seite Nr. 19
CONTROls This operator’s manual describes the Husqvarna Zero Transmission from the engine is made via belt-driven Turn Rider. The rider is fitted with a Kohler or Kawasaki hydraulic pumps. Using the left and right steering four-stroke overhead valve engine developing 26-34 controls, the flow is regulated and thereby the horse power*. direction and speed. Control Locations 4 Gas Engine 3 2 1 13 12 11 5 14 10 3 6 2 7 9 8 1. Motion control levers 2. Tracking knob 1 Propane 3. Parking brake Eng
Inhaltszusammenfassung zur Seite Nr. 20
CONTROls Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward o
