Inhaltszusammenfassung zur Seite Nr. 1
Operator's manual
BZ6127TD/968999262
BZ7234TD/968999264
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Inhaltszusammenfassung zur Seite Nr. 2
©2005 Husqvarna All righs reserved. Beatrice, NE Printed U.S.A. 2
Inhaltszusammenfassung zur Seite Nr. 3
INDEX Contents .........................................................3 Maintenance ..................................................34 Introduction....................................................4 Maintenance Schedule ................................34 Congratulations ...........................................4 Checking the Safety System .......................35 General ........................................................4 Mower Deck Leveling ..................................36 Dr
Inhaltszusammenfassung zur Seite Nr. 4
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing of large areas. Conveniant controls and a hydrostatic transmission regulated by steering levers also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale value. If you se
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION Good Service Husqvarna’s products are sold only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This
Inhaltszusammenfassung zur Seite Nr. 6
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxxxxx xxx xxxxx xxxxxxxx. Xxxxxx xxxxx xxxxxxxxx xxxxx xxxxx xxx x xxxxx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this pub
Inhaltszusammenfassung zur Seite Nr. 7
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use • Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. • Learn how to use the machine and its con- trols safely and learn how to stop quickly. Also learn to recognize the safety decals. •
Inhaltszusammenfassung zur Seite Nr. 8
SAFETY INSTRUCTIONS • Be careful when rounding fixed objects, so that the blades do not hit them. Never drive over WARNING! foreign objects. Engine exhaust and certain vehicle components contain or emit chemi- • Only use the machine in daylight or in other cals considered to cause cancer, well-lit conditions. Keep the machine a safe birth defects, or other reproductive distance from holes or other irregularities in system damage. The engine ex- the ground. Pay attention to other possible haust c
Inhaltszusammenfassung zur Seite Nr. 9
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if feel unsure, do not mow the slope. Do as follows: • Remove obstacles such as stones, tree branches, etc. • Mow up and down, not side-to-side. • Never drive the rider on terrain that slopes more than 10°. 6003-0
Inhaltszusammenfassung zur Seite Nr. 10
SAFETY INSTRUCTIONS Children: • Serious accidents may occur if you fail to be on guard for children in the vicinity of the ma- chine. Children are often attracted to the ma- chine and mowing work. Never assume that children will stay put where you last saw them. • Keep children away from the mowing area and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during a reversing maneuver, look backward and downward for
Inhaltszusammenfassung zur Seite Nr. 11
SAFETY INSTRUCTIONS • Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames. WARNING! • If leaks arise in the fuel system, the engine The engine, the exhaust system, must not be started until the problem has been and the hydraulic system’s compo- resolved. nents become very warm during • Store the machine and fuel in such a way that operation. there is no risk of leaking fuel or fuel vapor Risk for burns if touched. leading to damages.
Inhaltszusammenfassung zur Seite Nr. 12
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, and odorless, poi- sonous, and lethal gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine run- ning. • The machine is tested and approved only with the equipment originally provided or recom- mended by the manufacturer. • The blades are sharp and can cause cu
Inhaltszusammenfassung zur Seite Nr. 13
SAFETY INSTRUCTIONS Roll Over Protection System WARNING! This structure’s capability may be imparired by structural damage if overturned, or al- teration occurs. If any of these conditions take place, the total structure MUST be re- placed. DO NOT use ROPS as a lifting, attaching or anchoring point. DO NOT exceed Max GVW: 3553; ROPS mass 72 lbs./32 kg. Read machine operator’s manual before each use. Securely fasten your seat belt if the unit has a ROPS. Where possible, avoid operating the unit n
Inhaltszusammenfassung zur Seite Nr. 14
SETUP AND ADJUSTMENTS WARNING! No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- tery cable removed from battery. Setup Uncrate machine. Seat Assembly 3. Reinstall pin thru latch, spring and washer 1. Remove inner seat latch pin `E’ ring and slide with short spring leg up and against inside of pin out to left releasing latch, spring and latch. washer. 4. Position long spring leg over top of left side of 2. Rotate latch so hook wi
Inhaltszusammenfassung zur Seite Nr. 15
SETUP AND ADJUSTMENTS ROPS Assembly 4. Torque all 1/2” hardware to 80 ft./lbs. (110 N•m) and all 5/8” hardware to 97 ft/lbs. (131.5 N•m). (Roll Over Protection System) 5. Install and tighten knobs against the side post. ROPS Assembly Components 1 - Top Loop 1 - Left Side Post LATCH PIN TOP LOOP 1 - Right Side Post 1 - Hardware Bag 2 - 1/2” Latch Pins w/lanyard 2 - 1/2C x 3 1/4” Cap screws KNOB 2 - 1/2C Centerlock nuts 4 - 5/8C X 3” Cap screws 4 - 5/8C Centerlock nuts 1/2C X 3
Inhaltszusammenfassung zur Seite Nr. 16
SETUP AND ADJUSTMENTS Control Arms Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1 Control Motion Arm Control Wire Harness Lever 1. Connect the wire harness from the seat to the frame harness. FIG - 1 Engine Oil Check engine oil with dip stick. Add if needed per the engine manufactures specifications. See en- “F” Full gine manual for oil t
Inhaltszusammenfassung zur Seite Nr. 17
SETUP AND ADJUSTMENTS Loosen the nuts (A & B) directly behind each ball Mower Deck Leveling Position machine on a flat surface. Preferably level joint on both rods (C) that connect the pump arm concrete. to the motion control assemblies. FIG - 5 Check the tire pressure in all four tires. Inflation Start the engine. The park brake must be engaged should be 15 psi. and the motion control levers in the neutral slots to start the engine. Run the engine approximately Place 2x4’s on edge under the cut
Inhaltszusammenfassung zur Seite Nr. 18
CONTROLS Presentation This operator’s manual describes the Husqvarna Lever-Steered Rider Mower. The mower is fitted with a liquid cooled, 3 cylinder Daihatsu diesel engine (27 HP) or Daihatsu Turbo diesel engine (34 HP). Transmission from the engine is made via two belt-driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. BAM-1 Lever-Steered Rider 4 14 15 16 9 17
Inhaltszusammenfassung zur Seite Nr. 19
CONTROLS Gauges Water temperature gauge- indicates coolant temperature and warns of overheat situation. Ammeter - indicates amount of electrical flow at the battery. Under normal operating conditions the needle will be slightly on the plus (+) side of the gauge, showing that current is being supplied to the battery. At idle speed, the indicator may be at AMMETER zero or on the negative (-) side. A continuous OIL PRESSURE negative reading at normal operating speed WATER TEMPERATURE indicates a ma
Inhaltszusammenfassung zur Seite Nr. 20
CONTROLS Engaging the Mower Deck In order to engage the mower deck, pull the knob out; the mower deck is disengaged when the knob is depressed. Deck should be engaged at mid throttle and disengaged at idle speed to prolong clutch life. BAM-2 Engaging the mower deck Parking Brake The parking brake is found on the left of the machine. Pull the lever back to activate the brake and push forward to release it. BAM-4 Parking brake not activated Seat Adjustment Located on the left side of the seat is t
