Inhaltszusammenfassung zur Seite Nr. 1
7021RC
Operator's Manual / 96143005700 / 2009-12
532 43 13-45 12.08.09 BY Printed in U.S.A.
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY RULES Safe Operation Practices for Walk-Behind Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. � Stop the blade(s) when crossing gravel drives, walks, Look for this symbol to point out im- or roads. por tant safety precautions. It means � Stop the engine (motor) whenever you leave the equip- CAUTION!!! BE COME ALERT!!! YOUR ment, befo
Inhaltszusammenfassung zur Seite Nr. 3
� Never refuel the machine indoors. wire away from plug to prevent accidental starting. � Never store the machine or fuel container where there � Keep nuts and bolts, especially blade attachement is an open fl ame, spark or pilot light such as a water bolts, tight and keep equipment in good condition. heater or on other appliances. � Never tamper with safety devices. Check their proper � Never fi ll containers inside a vehicle, on a truck or trailer operation regularly. bed with a plastic liner
Inhaltszusammenfassung zur Seite Nr. 4
ASSEMBLY Read these instructions and this man u al in its entirety before you attempt to assemble or operate your new lawn mow er. IMPORTANT: THIS LAWN MOWER IS SHIPPED WITH OUT OIL OR GASOLINE IN THE ENGINE. Your new lawn mower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts bag. To ensure safe and proper operation
Inhaltszusammenfassung zur Seite Nr. 5
OPERATION KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER. Compare the illustrations with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your lawn mower or in literature supplied with the product. Learn and understand their meaning. OPERATOR PRESENCE CON TROL BAR HANDLE KNOB DRIVE CONTROL DRIVE COVER LEVERS GAS O LINE FILL ER
Inhaltszusammenfassung zur Seite Nr. 6
OPERATION The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or per- forming any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask over spectacles. 3. Operate mower to test drive speed. Readjust as re- HOW TO USE YOUR LAWN MOWER quired. ENGINE SPEED 4. If condition fails to improve after the above steps (fo
Inhaltszusammenfassung zur Seite Nr. 7
OPERATION CASTER WHEEL OPERATION 5. Lift the round door of the discharge chute and place the grass catcher into place on the discharge chute. The front wheels can be “locked” into position or set to “freewheel” for better maneuverability. Placing the lockbars NOTE: Be sure the grass catcher is securely locked in in the outer holes of the adjustment brackets “locks” the place and the round door of the discharge chute rests on front wheels. Likewise, placing the lockbars in the inner the
Inhaltszusammenfassung zur Seite Nr. 8
OPERATION SIMPLE STEPS TO REMEMBER 1. Open round door of discharge chute to move starter WHEN CONVERTING YOUR LAWN MOWER rope out and away from grass catcher. FOR MULCHING - 2. Remove grass catcher with clippings from lawn mower using both front and rear handles. 1. Rear mulcher plug installed. 2. Mulcher door closed. 3. Empty clippings from grass catcher using both rear handle and strap. The weight of the grass will open FOR REAR BAGGING - the door. 1. Rear mulcher plug removed. 4. Snap
Inhaltszusammenfassung zur Seite Nr. 9
OPERATION ADD GASOLINE (See Fig. 12) MOWING TIPS � Fill fuel tank to bottom of tank fi ller neck. Do not over- CAUTION: Do not use de-thatcher blade fi ll. Use fresh, clean, regular unleaded gasoline with attachments on your mower. Such at- a minimum of 87 octane. Do not mix oil with gasoline. tachments are hazardous, will damage Purchase fuel in quan ti ties that can be used within 30 your mower and could void your warranty . days to assure fuel freshness. � Under certain conditions, s
Inhaltszusammenfassung zur Seite Nr. 10
MAINTENANCE BEFORE AFTER EVERY EVERY EVERY BEFORE EACH EACH 10 25 HOURS 100 STORAGE USE USE HOURS OR SEASON HOURS Check for Loose Fasteners Clean / Inspect Grass Catcher * Check Tires Check Drive Wheels *** Clean Lawn Mower **** Clean under Drive Cover *** Check Drive Belt / Pulleys *** Check / Sharpen / Replace Blade Lubrication Clean and Recharge Battery ** Check Engine Oil level Change Engine Oil Clean Air Filter Inspect Muffler Replace Spark Plug Replace Air Filter Paper Cartridge Empty fuel
Inhaltszusammenfassung zur Seite Nr. 11
MAINTENANCE Care should be taken to keep the blade balanced. An LAWN MOWER un bal anced blade will cause eventual damage to lawn Always observe safety rules when performing any main- mower or engine. te nance. � The blade can be sharp ened with a fi le or on a grind- ing wheel. Do not attempt to sharpen while on the TIRES mower. � Keep tires free of gasoline, oil, or insect control chem- � To check blade balance, drive a nail into a beam or i cals which can harm rubber. wall. Leave about o
Inhaltszusammenfassung zur Seite Nr. 12
MAINTENANCE 7. Continue adding small amounts of oil and rechecking LUBRICATION the dipstick until it reads full. DO NOT overfi ll, or engine Use only high quality detergent oil rated with API service will smoke on startup. classifi cation SG–SL. Select the oil's SAE viscosity grade 8. Always be sure retighten dipstick before starting engine. according to your expected operating temperature. 9. Re con nect spark plug wire to spark plug. OIL FILL CAP / DIPSTICK NOTE: Multi-viscosity oils (5W3
Inhaltszusammenfassung zur Seite Nr. 13
SERVICE AND ADJUSTMENTS 3. Remove drive cable from anchor, then detach it and CAUTION: TO AVOID SERIOUS INJURY, return spring from idler arm assembly (See Fig. 19). BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: DRIVE CABLE HOUSING 1. Release control bar and stop en- ANCHOR HOLE gine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it can- not come in contact with plug. DRIVE DRIVE RETURN IDLER ARM LAWN MOW
Inhaltszusammenfassung zur Seite Nr. 14
SERVICE AND ADJUSTMENTS TO REPLACE DRIVE BELT TO ADJUST HANDLE (See Fig. 22) 1. Place new drive belt in the belt retainer of the debris The handle on your lawn mower has three (3) height posi- shield. Be sure to route belt between belt keepers and tions - adjust to height that suits you. through slot as shown (See Fig. 21). � Squeeze the bottom ends of lower handle towards each other until the pin in handle can be inserted into one BELT RETAINER TAB of the three height adjustment holes. BE
Inhaltszusammenfassung zur Seite Nr. 15
STORAGE Immediately prepare your mower for storage at the end of the season or if the unit will not be used for 30 days or more. HANDLE PIN LAWN MOWER When lawn mower is to be stored for a period of time, clean SQUEEZE it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area. 1. Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual). HANDLE BRACKET 2. Lubricate as shown in the Maintenance section of this manual. 3. Be sure that all nuts,
Inhaltszusammenfassung zur Seite Nr. 16
STORAGE � If possible, store your unit indoors and cover it to give CYLINDER protection from dust and dirt. 1. Remove spark plug. � Cover your unit with a suitable protective cover that 2. Pour one ounce (29 ml) of oil through spark plug hole does not retain moisture. Do not use plastic. Plastic into cylinder. cannot breathe, which allows condensation to form and 3. Pull starter handle slowly a few times to distribute oil. will cause your unit to rust. IMPORTANT: NEVER COVER MOWER WHILE
Inhaltszusammenfassung zur Seite Nr. 17
TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Does not start 1. Dirty air fi lter. 1. Clean/replace air fi lter. 2. Out of fuel. 2. Fill fuel tank. 3. Stale fuel. 3. Empty fuel tank and refi ll tank with fresh, clean gasoline. 4. Water in fuel. 4. Empty fuel tank and refi ll tank with fresh, clean gasoline. 5. Spark plug wire is disconnected. 5. Connect wire to plug. 6. Bad spark plug. 6. Replace spark plug. 7. Loose blade or broken blade adapter. 7. Tight en blade bolt or r
Inhaltszusammenfassung zur Seite Nr. 18
18 starter ropes and tines; (2) Natural discoloration of material due to ultraviolet light; WARRANTY STATEMENT (3) Engine and drive systems not manufactured by Husqvarna; these items are covered by the respective manufacturer’s warranty as provided in writing with the product information supplied at the time of purchase; all claims must be sent to the SECTION 1: LIMITED WARRANTY appropriate manufacturer; Husqvarna Forest & Garden Company (“Husqvarna”) warrants Husqvarna product to the original
