Inhaltszusammenfassung zur Seite Nr. 1
415021(1) 7/7/04 11:38 am Page 1.1
Ranger 41 Push
CODE
415A
OWNER'S HANDBOOK
(English Version)
FROM SERIAL NO: 415A001001 HANDBOOK: 415021 (Rev.1.)
Issue : 10.05.04
Inhaltszusammenfassung zur Seite Nr. 2
BRIGGS & STRATTON HARRIER 41 415021(1) 7/7/04 11:38 am Page 1.2 MAIN FEATURES /SPECIFICATIONS Main Features 1 Air Cleaner 8 2 Fuel Filler Cap 3 Oil Filler Cap and Dipstick 7 4 Handlebar Securing Knob 5 Engine Start-Grip 6 6 Throttle Control. 7 Engine Stop lever. 8 Handlebar 5 9 Grassbag Assembly 10 Height of Cut Adjuster 11 Serial No. Label 12 Exhaust Guard 13 Rear Deflector 14 Spark Plug Lead 4 13 11 9 3 2 10 1 14 12 1C415A05 Specifications Code 415A Engine Briggs & Stratton Quantum XTS 50
Inhaltszusammenfassung zur Seite Nr. 3
415021(1) 7/7/04 11:38 am Page 1.3 1ST Year (12 months) 1ST Year (12 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your records. 2nd Year (24 months) 2nd Year (24 months) Owner’s Name: We certify that this service has been carried out by an Authorised Hayter Serial Number: Service Dealer Date: Date: Note for dealer: Please retain this voucher for your r
Inhaltszusammenfassung zur Seite Nr. 4
415021(1) 7/7/04 11:38 am Page 1.5 CONTENTS 1.2 Main Features/Specifications 1.20 Maintenance Schedule 1.5 Contents 1.21 - 1.27 Mower Maintenance 1.6 Introduction 1.21 - Engine 1.21 - Throttle Cable Adjustment 1.7 Warranty 1.21 - Carburettor Adjustments 1.22 - Oil Service 1.8 - 1.11 Safety Precautions 1.22 - Air Cleaner Service 1.23 - Spark Plug Service 1.11 Safety Symbols 1.23 - Keeping Engine Clean 1.11 Decal Symbols 1.23 - Grassbag 1.24 - Deck Housing 1.12 Assembling the Mower 1.24 - S
Inhaltszusammenfassung zur Seite Nr. 5
415021(1) 7/7/04 11:38 am Page 1.6 INTRODUCTION Thank you for purchasing a Hayter mower. The following pages are designed to help you gain safe and efficient service from your mower. IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives essential information regarding mower safety, operation, maintenance and specifications. Read and understand this handbook prior to operating your mower for the first time. Make sure you are familiar with all the controls and
Inhaltszusammenfassung zur Seite Nr. 6
415021(1) 7/7/04 11:38 am Page 1.7 WARRANTY LIMITED WARRANTY Hayter Limited warrants to the original user/purchaser that this unit shall be free from defects in material and workmanship under normal use and service for a period of three years from the date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / transaxle (where applicable) furnish their own warranty and services are provided through their authorised network. To qualify for the full benefit of the
Inhaltszusammenfassung zur Seite Nr. 7
415021(1) 7/7/04 11:38 am Page 1.8 SAFETY PRECAUTIONS Safety Alert Symbol This safety alert symbol indicates important safety messages. When you see this symbol be alert to the possibility of injury. Carefully read the following and inform others. Your mower is perfectly safe if used correctly. Failure to observe the following precautions may result in serious injury. Training Before using the mower read the owners handbook carefully. Pay par- ticular attention to the safety precautions. Ens
Inhaltszusammenfassung zur Seite Nr. 8
415021(1) 7/7/04 11:38 am Page 1.9 SAFETY PRECAUTIONS Preparation - Always use fresh fuel. Stale fuel can block the carburettor and cause leakage. - Replace fuel tank and oil tank caps securely. A damaged cutterblade or loose fixing bolt are major hazards. Before use, always visually inspect the cutting mechanism to ensure that it is in good condition. A damaged cutterblade must be replaced immedi- ately with a genuine Hayter replacement part Operation Do not operate the engine in a confine
Inhaltszusammenfassung zur Seite Nr. 9
415021(1) 7/7/04 11:38 am Page 1.10 SAFETY PRECAUTIONS Operation Do not tilt the mower when starting the engine. Do not put hands or feet near or under rotating parts. Never pick up or carry the mower while the engine is running. Never lift the rear deflector while the engine is running. Never touch the exhaust/exhaust guard or cooling fins when the engine is hot. Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the discharge chute. - Before cleani
Inhaltszusammenfassung zur Seite Nr. 10
415021(1) 7/7/04 11:38 am Page 1.11 SAFETY PRECAUTIONS Maintenance & Storage Allow the engine to cool before storing in any enclosure. To reduce the fire hazard, keep the engine and the surrounding deck area free of grass, leaves, or excessive grease. Check the rear deflector and grassbag frequently for wear or deterioration. Replace worn or damaged parts for safety. If the fuel tank has to be drained, this should be done outdoors and when the engine is cool. Wear strong work gloves when remo
Inhaltszusammenfassung zur Seite Nr. 11
BR IGG S & ST AT R TON H 41 ARRIER ER 415021(1) 7/7/04 11:38 am Page 1.12 ASSEMBLING THE MOWER Delivery Checklist Remove the mower from the packaging and check that the following items have been supplied correctly. If any items are missing contact, your local Hayter dealer. 1. Engine Handbook. To prevent accidents cut off the long ribbon attached to the grass- bag and discard. Handlebar Unscrew the handlebar securing knobs sufficiently to allow the handle- bar to pivot. Hold the engine stop
Inhaltszusammenfassung zur Seite Nr. 12
415021(1) 7/7/04 11:38 am Page 1.13 STARTING THE MOWER BEFORE Prevent Engine Damage To prevent engine damage the engine is shipped without oil or petrol. The engine must be filled with the correct grade of oil and petrol before starting the engine. Oil Type Always use high quality detergent oil classified SAE 30 oil. Never use additives with recommended oil. To prolong the life of your engine it is important that the oil is changed after the first 5 hours of use - refer to ‘Maintenance Sch
Inhaltszusammenfassung zur Seite Nr. 13
415021(1) 7/7/04 11:38 am Page 1.14 OPERATING THE MOWER Controls Check that the engine stop lever returns freely to its rest position when released. Whilst operating the engine throttle mechanism slight resistance should be felt when moving the lever to the ‘choke’ position. Starting - Step 1 Move the throttle control lever to the ‘choke’ position before starting a cold engine. Move the throttle control lever to the ‘fast’ position before starting a warm engine. Step 2 Stand behind the mower
Inhaltszusammenfassung zur Seite Nr. 14
415021(1) 7/7/04 11:38 am Page 1.15 OPERATING THE MOWER Turning To turn steer the mower with the handlebar in the direction required. To make a tight turn, apply downward pressure on the handlebar to raise the front wheels just above ground level and steer in the required direction. To prevent accidents do not raise the front of the mower exces- sively when making a turn. Never raise the rear of the mower when the engine is running. Stopping Release the engine stop lever. Emergency stop: If
Inhaltszusammenfassung zur Seite Nr. 15
415021(1) 7/7/04 11:38 am Page 1.16 OPERATING THE MOWER Before Mowing To prevent accidents thoroughly inspect the area and remove all objects which when contacted by the mower cutterblade could become dangerous projectiles. Inspect the area for hidden obstruc- tions which when contacted by the cutterblade could risk health and safety. Remember the location of these obstructions and ensure that you mow around them. Grassbag Raise the rear deflector and lift the grassbag through the handlebar a
Inhaltszusammenfassung zur Seite Nr. 16
415021(1) 7/7/04 11:38 am Page 1.17 OPERATING THE MOWER Friction Disc The cutterblade is driven by the engine via a friction disc to help pre- vent damage occurring to the engine crankshaft and cutting mecha- nism when a hidden obstruction or overload is encountered. Always stop the engine when a hidden obstruction or excessive vibra- tion is encountered. Disconnect the spark plug lead and examine the cutting mechanism. ALWAYS replace a damaged cutterblade - refer to “Maintenance”. Non-Gra
Inhaltszusammenfassung zur Seite Nr. 17
415021(1) 7/7/04 11:38 am Page 1.18 LAWN CARE CALENDAR To be used as a guide only. January There is very little work to do this month apart from brushing away leaves. Keep off the grass if frozen or waterlogged. February Rake the grass thoroughly. Spike the lawn to aerate and stimulate soil organisms and root growth and apply lawn sand if necessary. March The yearly lawn work programme really starts this month. As soon as the ground conditions are suitable, the first cut can be made. The fir
Inhaltszusammenfassung zur Seite Nr. 18
415021(1) 7/7/04 11:38 am Page 1.19 LAWN CARE CALENDAR August Keep mowing regularly and watering as necessary. Fill any cracks caused by drought with a mixture of sharp sand and soil. In dry weath- er conditions leave the grass longer to help retain ground moisture. September Raise the height of cut to allow the grass to thicken and protect the roots from the winter frost and snow. October Rake out the thatch from the turf and spike the lawn to assist in drainage. Brush in peat and sharp sand
Inhaltszusammenfassung zur Seite Nr. 19
415021(1) 7/7/04 11:38 am Page 1.20 MAINTENANCE SCHEDULE To prevent accidents stop the engine disconnect the spark plug lead before attempting to carry out maintenance procedures on the mower. After the very first five hours change the engine oil. Follow the hourly or calendar intervals, whichever occurs first. More frequent service will be required if working for prolonged periods under dusty, dry conditions, or when airborne debris is present or after extensive operation cutting tall, dry g
Inhaltszusammenfassung zur Seite Nr. 20
BRIGGS & ST RATTON HARRIER 41 415021(1) 7/7/04 11:38 am Page 1.21 MOWER MAINTENANCE 100Hrs or Every Season Clean the engine cooling system. Clean more often under dusty condi- tions or when airborne debris is present or after prolonged operation whilst cutting tall, dry grass. Replace the spark plug Engine 3 1. Air Filter 2 2. Fuel Cap 4 3. Start Grip 1 4. Oil Cap/ Dipstick 5. Exhaust Guard 6. Spark Plug / Lead 6 5 Throttle Cable Adjustment Loosen casing clamp screw (1) and move the governor
