Inhaltszusammenfassung zur Seite Nr. 1
ROLLER COMPACT
400/4000
ROLLER COMPACT
400
ROLLER COMPACT
4000
For all customer enquiries or for replacement parts, contact:-
☎ ☎
01325 300303
www.flymo.com
eop.customer.services@electrolux.co.uk
IMPORTANT INFORMATION
Read before use
& retain for future reference
Inhaltszusammenfassung zur Seite Nr. 2
Carton Contents lower handle grassbox lid ROLLER COM- fixing pins washers bolts PACT 400 height adjsut- ment lever spanner/scraper lock-off button nuts handle knob deck cable clips instruction manual upper handle electric cable with lower handle moulded on plug lower handle Easi-Reel washers ROLLER COM- bolts cable spool fixing pins PACT 4000 grassbox lid height adjsut- spanner/scraper ment lever lock-off button nuts handle knob deck cable instruction clips manual upper handle electric cable w
Inhaltszusammenfassung zur Seite Nr. 3
General for signs of wear or damage and repair as necessary. 1. Never allow children or people unfamiliar with these 4. Replace worn or damaged blades together with their instructions to use the mower. Local regulations may fixings in sets to preserve balance. restrict the age of the operator. Use 2. Only use the lawnmower in the manner and for the 1. Use the lawnmower only in daylight or good artificial light. functions described in these instructions. 2. Avoid operating your lawnmower in wet g
Inhaltszusammenfassung zur Seite Nr. 4
Assembly Instructions A B Assembly of Lower Handles to Deck grassbox lid C 1. Insert lower handle into holes in the deck (A). 2. Release the grassbox catch and lift the grassbox lid (B). 3. Rest the grassbox lid against the lower handle and remove the grassbox. lower 4. Push the lower handle into place ensuring that the handle holes in the lower handle are correctly located fixing behind the holes in the deck. pins 5. Secure the lower handles to the inside of the deck with the lower handle fixin
Inhaltszusammenfassung zur Seite Nr. 5
Removing, Emptying and Refitting the Grassbox grassbox F Grassbox Full empty • As the grassbox fills up, grass will be visible through the window in the lid (F). • When the window is full it is time to empty the grassbox. Emptying the Grassbox • Stop the lawnmower, as described in ‘To Stop your grassbox Lawnmower’and wait until the blade has stopped full rotating, BEFORE lifting the grassbox lid. 1. Release grassbox catch and lift grassbox lid (B). G See Assembly Instructions. 2. Rest grassbox
Inhaltszusammenfassung zur Seite Nr. 6
Starting and Stopping • Important:- Your lawnmower will not start until the K L grassbox lid is firmly closed and clicked into place. To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox. (K) 2. Form loop in mains cable and push the loop through the slot as illustrated in picture (L) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (M). 4. Connect plug to mains and switch on. M 5. Tilt the ha
Inhaltszusammenfassung zur Seite Nr. 7
Removing and Fitting the Blade and Fan (Q) Always handle the blade with care - sharp edges could cause injury. USE GLOVES. blade bolt Q Removing the Blade and Fan fan 1. To remove the blade bolt, hold the fan firmly and, with the spanner provided, loosen the blade bolt by turning it anti-clockwise. blade 2. Remove the blade bolt, blade and fan from the pulley. 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardles
Inhaltszusammenfassung zur Seite Nr. 8
Caring for your Lawmower Cleaning (S) S • USE GLOVES • IMPORTANT: It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. • IMPORTANT Never use water for cleaning your lawnmower. Do not clean with chemicals, includ- ing petrol, or solvents - some can destroy critical plastic parts. 1. Remove grass from under the deck with the spanne/scraper tool 2. Remove the blade, see Figure Q, to gain ac
Inhaltszusammenfassung zur Seite Nr. 9
Fault Finding Hints Fails to Operate Lawnmower becomes heavy to push 1. Is the correct Starting procedure being followed? 1. Disconnect from the mains electricity supply. See ‘To Start your Lawnmower’. 2. In long grass or uneven ground, the height of cut 2. Is the grassbox lid firmly closed? should be raised to a higher position. See Cutting 3. Is the Power Turned On? Height Adjustment 4. Check the fuse in the plug, if blown replace. 3. Check that the wheels and roller can rotate freely. 5. Fuse
Inhaltszusammenfassung zur Seite Nr. 10
Environmental Information Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, com- ponents manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. • Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling. • Awareness of the environment must be considered when dispos
