Inhaltszusammenfassung zur Seite Nr. 1
For Serial Nos.
440,000 & Higher
Part No. 103-6698
Inhaltszusammenfassung zur Seite Nr. 2
WARNING POTENTIAL HAZARD ♦ This product is a piece of power equipment. WHAT CAN HAPPEN ♦ Failure to follow safe operating practices can result in serious operator injury or even death. HOW TO AVOID THE HAZARD ♦ Keep all shields, guards, and safety devices (especially the grass discharge system) in place and in proper working condition. ♦ Stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before adjusting, servicing, or performin
Inhaltszusammenfassung zur Seite Nr. 3
® EXMARK PARTS PLUS PROGRAM EFFECTIVE DATE: September 1, 1995 Program If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1. If dealer does not have part in stock for a "down" unit at the time of request by customer, the dealer contacts his distributor by 1:00 p.m., local time, and requests Exmark ® Parts Plus shipment of six (6) line items or
Inhaltszusammenfassung zur Seite Nr. 4
CONGRATULATIONS on the purchase of your Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation. OPERATOR'S MANUAL This manual contains assembly, operating, maintenance, adjustment, and safety instructions for your Exmark mower. BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following the operating, maintenance, and safety instructions, you will
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS 1. SAFETY PAGE 1.1 Safety Alert Symbol......................................................................................... 1 1.2 Training ........................................................................................................... 1 1.3 Preparation................................................................................................... 1-3 1.4 Operation......................................................................
Inhaltszusammenfassung zur Seite Nr. 6
1. SAFETY 1.1 SAFETY ALERT SYMBOL This SAFETY ALERT SYMBOL is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents. This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The safety alert symbol appears above information which alerts you to unsafe actions or situations and will be followed by the word DANGER, WARNING, or CAUTION. DANGER: White lettering / Red background. Indicates an imminently
Inhaltszusammenfassung zur Seite Nr. 7
1.3.4 Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders. WARNING POTENTIAL HAZARD ♦ Engine exhaust contains carbon monoxide, which is an odorless deadly poison. WHAT CAN HAPPEN ♦ Carbon monoxide can kill you. HOW TO AVOID THE HAZARD ♦ Do not run engine indoors or in a small confined area where dangerous ca
Inhaltszusammenfassung zur Seite Nr. 8
DANGER POTENTIAL HAZARD ♦ In certain conditions gasoline is extremely flammable and highly explosive. WHAT CAN HAPPEN ♦ A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage. HOW TO AVOID THE HAZARD ♦ Purchase and store gasoline only in an approved container. ♦ Always place gasoline containers on the ground away from your vehicle before filling. ♦ Do not fill gasoline containers inside a vehicle or on
Inhaltszusammenfassung zur Seite Nr. 9
1.4 OPERATION Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing. WARNING POTENTIAL HAZARD ♦ Operating eng
Inhaltszusammenfassung zur Seite Nr. 10
DANGER POTENTIAL HAZARD ♦ Mowing on wet grass or steep slopes can cause sliding and loss of control. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Do not mow slopes when grass is wet. ♦ Do not mow near drop-offs or near water. ♦ Do not mow slopes greater than 15 degrees. ♦ Reduce speed and use extreme caution on slopes. ♦ Avoid sudden turns or rapid
Inhaltszusammenfassung zur Seite Nr. 11
WARNING POTENTIAL HAZARD ♦ There is no rollover protection when the roll bar is down. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Keep the roll bar in the raised and locked position and use seat belt. ♦ Lower the roll bar only when absolutely necessary. ♦ Do not wear seat belt when the roll bar is down. ♦ Drive slowly and carefully. ♦ Raise the ro
Inhaltszusammenfassung zur Seite Nr. 12
1.4.17 Do Not mow with the discharge deflector raised, removed or altered unless there is a grass collection system or mulch kit in place and working properly. 1.4.18 Be aware of the mower discharge and direct discharge away from others. 1.4.19 Do Not operate mower under the influence of alcohol or drugs. 1.4.20 Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. 1.4.21 If jump starting is required: a) connect the positive (+) pow
Inhaltszusammenfassung zur Seite Nr. 13
WARNING POTENTIAL HAZARD ♦ Hydraulic fluid escaping under pressure can penetrate skin and cause injury. WHAT CAN HAPPEN ♦ Fluid accidentally injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result. HOW TO AVOID THE HAZARD ♦ Make sure all hydraulic fluid hoses and lines are in good condition an all hydraulic connections and fittings are tight before applying pressure to hydraulic system. ♦ Keep
Inhaltszusammenfassung zur Seite Nr. 14
DO NOT OPERATE WITHOUT GUARD IN PLACE. 1-513748 PART NO. 1-513748 LOCATIONS: Bottom Side of Floorpan PART NO. 103-3794 PART NO. 103-3979 LOCATION: LH Side of Console LOCATION: RH Side of Console PART NO. 1-523552 LOCATION: Top of Hydraulic PART NO. 1-323540 PART NO. 1-643222 Reservoir, LOCATION: Left Rear Corner Top LOCATION: Left of Center on Mower of Mower Deck Deck, Under Floor Pan PART NO. 1-513746 L
Inhaltszusammenfassung zur Seite Nr. 15
PART NO. 103-6936 LOCATION: Rubber Heat Shield PART NO. 1-303508 Flap Behind Seat LOCATION: RH Side on Top Rear of Mower Deck PART NO. 1-633706 LOCATION: LH Side of Cutting Height Adjustment Plate PART NO. 103-7616 LOCATION: Top Front of RH Fuel Tank PART NO. 1-633922 LOCATION: Front Center on Top of Mower Deck PART NO. 107-2112 LOCATION: Top Center of Floorpan PART NO. 103
Inhaltszusammenfassung zur Seite Nr. 16
2. SPECIFICATIONS 2.1 MODEL NUMBER Serial Nos. 440,000 and Higher: LZ31BV604; LZ31BV724 2.2 ENGINE 2.2.1 Engine Specifications: See your Engine Owner’s Manual 2.2.2 RPM: Full Speed: 3750 RPM (No Load) Idle: 1500 RPM 2.3 FUEL SYSTEM 2.3.1 Capacity: 15.5 gal. (56.8 L.) 2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher 2.3.3 Fuel Filter: In-line 30 Micron Briggs P/N 695327. 2.3.4 Fuel Shut-Off Valve: 1/4 turn increments (left tank, “OFF”, right
Inhaltszusammenfassung zur Seite Nr. 17
2.6 SEAT 2.6.1 Type: Deluxe suspension seat high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests, adjustable back angle. 2.6.2 Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with scissor-type links.. Adjustable fore and aft seat track. 2.6.3 Armrests: Molded adjustable flip-up armrests. 2.6.4 Seat Safety Switch: Incorporated into the Safety Interlock System. Time dela
Inhaltszusammenfassung zur Seite Nr. 18
2.10 DIMENSIONS 2.10.1 Overall Width: without deck deflector up deflector down 60” Deck 54.5 in. (138.4 cm) 61.4 in. (156.0 cm) 72.2 in. (183.4 cm) 72” Deck 58.5 in. (148.6 cm) 73.2 in. (185.9 cm) 84.3 in. (214.1 cm) 2.10.2 Overall Length: Roll Bar – Up Roll Bar - Down 60” Deck 82.2 in. (208.8 cm) 92.3 in. (234.4 cm) 72” Deck 86.0 in. (218.4 cm) 96.1 in. (244.1 cm) 2.10.3 Overall Height: Roll Bar - Up Roll Bar - Down 60” Deck 73.7 in. (187.2 cm) 55.6 in. (141.2 cm)
Inhaltszusammenfassung zur Seite Nr. 19
c) LOOSELY install the lower roll bar hardware (four 3/8-16 x 1 capscrews, four spring disk washers and four 3/8-16 whizlock nuts) from the bolt bag to the tubes on each side as shown in Figure 2. NOTE: Be sure the spring disk washer cone is installed towards the head of the capscrew. FIGURE 2 LOWER ROLL BAR INSTALLATION 3.2.5 Install the upper u-shaped section of the roll bar. (Reference Figure 3 for alignment and installation instructions below):
Inhaltszusammenfassung zur Seite Nr. 20
FIGURE 3 UPPER ROLL BAR INSTALLATION 3.3 SERVICE BATTERY WARNING: Battery posts, terminals, and related accessories contain lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling. The machine is shipped with a filled lead acid battery. 3.3.1 Unhook seat latch and tilt seat up to gain access to the battery. DANGER POTENTIAL HAZARD ♦ Charging the battery may produce explosive gas
