Inhaltszusammenfassung zur Seite Nr. 1
For Serial Nos.
540,000 & Higher
Part No. 103-9170
Inhaltszusammenfassung zur Seite Nr. 2
WARNING POTENTIAL HAZARD ♦ This product is a piece of power equipment. WHAT CAN HAPPEN ♦ Failure to follow safe operating practices can result in serious operator injury or even death. HOW TO AVOID THE HAZARD ♦ Keep all shields, guards, and safety devices (especially the grass discharge system) in place and in proper working condition. ♦ Stop engine and wait for all moving parts to stop. Remove spark plug wire(s) or remove key before adjusting, servicing, or performing
Inhaltszusammenfassung zur Seite Nr. 3
® EXMARK PARTS PLUS PROGRAM EFFECTIVE DATE: September 1, 1995 Program If your Exmark dealer does not have the Exmark part in stock, Exmark will get the parts to the dealer the next business day or the part will be FREE* Guaranteed!! How the Program Works 1. If dealer does not have part in stock for a "down" unit at the time of request by customer, the dealer contacts his distributor by 1:00 p.m., local time, and requests Exmark ® Parts Plus shipment of six (6) line items or
Inhaltszusammenfassung zur Seite Nr. 4
CONGRATULATIONS on the purchase of your Exmark Mower. This product has been carefully designed and manufactured to give you a maximum amount of dependability and years of trouble-free operation. OPERATOR'S MANUAL This manual contains assembly, operating, maintenance, adjustment, and safety instructions for your Exmark mower. BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY. By following the operating, maintenance, and safety instructions, you will
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS 1. SAFETY PAGE 1.1 Safety Alert Symbol....................................................................................... 1 1.2 Training ......................................................................................................... 1 1.3 Preparation................................................................................................. 1-3 1.4 Operation .........................................................................
Inhaltszusammenfassung zur Seite Nr. 6
1. SAFETY 1.1 SAFETY ALERT SYMBOL This SAFETY ALERT SYMBOL is used both in this manual and on the machine to identify important safety messages which must be followed to avoid accidents. This symbol means: ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! The safety alert symbol appears above information which alerts you to unsafe actions or situations and will be followed by the word DANGER, WARNING, or CAUTION. DANGER: White lettering / Red background. Indicates an imminently
Inhaltszusammenfassung zur Seite Nr. 7
1.3.4 Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects which may damage the equipment or cause personal injury to the operator or bystanders. WARNING POTENTIAL HAZARD ♦ Engine exhaust contains carbon monoxide, which is an odorless deadly poison. WHAT CAN HAPPEN ♦ Carbon monoxide can kill you. HOW TO AVOID THE HAZARD ♦ Do not run engine indoors or in a small confined area where dangerous ca
Inhaltszusammenfassung zur Seite Nr. 8
DANGER POTENTIAL HAZARD ♦ In certain conditions gasoline is extremely flammable and highly explosive. WHAT CAN HAPPEN ♦ A static charge can ignite gasoline vapors. A fire or explosion from gasoline can burn you, others, and cause property damage. HOW TO AVOID THE HAZARD ♦ Purchase and store gasoline only in an approved container. ♦ Always place gasoline containers on the ground away from your vehicle before filling. ♦ Do not fill gasoline containers inside a vehicle or on
Inhaltszusammenfassung zur Seite Nr. 9
1.4 OPERATION Although hazard control and accident prevention are partially dependent upon the design and configuration of the equipment, these factors are also dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. It is essential that all Operator Safety Mechanisms be connected and in operating condition prior to use for mowing. WARNING POTENTIAL HAZARD ♦ Operating eng
Inhaltszusammenfassung zur Seite Nr. 10
DANGER POTENTIAL HAZARD ♦ Mowing on wet grass or steep slopes can cause sliding and loss of control. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Do not mow slopes when grass is wet. ♦ Do not mow near drop-offs or near water. ♦ Do not mow slopes greater than 15 degrees. ♦ Reduce speed and use extreme caution on slopes. ♦ Avoid sudden turns or rapi
Inhaltszusammenfassung zur Seite Nr. 11
WARNING POTENTIAL HAZARD ♦ There is no rollover protection when the roll bar is down. WHAT CAN HAPPEN ♦ Wheels dropping over edges, ditches, steep banks, or water can cause rollovers, which may result in serious injury, death or drowning. HOW TO AVOID THE HAZARD ♦ Keep the roll bar in the raised and locked position and use seat belt. ♦ Lower the roll bar only when absolutely necessary. ♦ Do not wear seat belt when the roll bar is down. ♦ Drive slowly and carefully. ♦ Raise the
Inhaltszusammenfassung zur Seite Nr. 12
1.4.17 Do Not mow with the discharge deflector raised, removed or altered unless there is a grass collection system or mulch kit in place and working properly. 1.4.18 Be aware of the mower discharge and direct discharge away from others. 1.4.19 Do Not operate mower under the influence of alcohol or drugs. 1.4.20 Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. 1.4.21 If jump starting is required: a) connect the positive (+) pow
Inhaltszusammenfassung zur Seite Nr. 13
WARNING POTENTIAL HAZARD ♦ Hydraulic fluid escaping under pressure can penetrate skin and cause injury. WHAT CAN HAPPEN ♦ Fluid accidentally injected into the skin must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result. HOW TO AVOID THE HAZARD ♦ Make sure all hydraulic fluid hoses and lines are in good condition an all hydraulic connections and fittings are tight before applying pressure to hydraulic system. ♦ Keep
Inhaltszusammenfassung zur Seite Nr. 14
PART NO. 1-303508 LOCATION: RH Side on Top Rear of Mower Deck PART NO. 103-3997 LOCATION: RH Side of Console PART NO. 1-633313 LOCATION: RH Side on Top Front of Mower Deck PART NO. 1-513748 LOCATION: Bottom Side of Floorpan PART NO. 1-523552 PART NO. 1-403005 LOCATION: Top of Hydraulic LOCATION: Left and Right Corners Reservoir, Under of Mower Deck the Seat PART NO. 1-633462 LOCATION: Rub
Inhaltszusammenfassung zur Seite Nr. 15
PART NO. 103-0262 LOCATION: Center Front of PART NO. 1-643222 Console LOCATION: Left of Center on Mower PART NO. 1-633922 Deck, Under Floor Pan LOCATION: Front Center on Top of Mower Deck PART NO. 103-0368 PART NO. 1-643339 LOCATION: Rubber Heat Shield Flap behind Seat LOCATION: Top of Right Engine Baffle PART NO. 103-7491 LOCATION: LH Side on Top Front of Mower Deck PART NO. 103-3270 LOCATION: On Engine PART NO. 98-5954 LOCATION: Under Mower Deck Belt
Inhaltszusammenfassung zur Seite Nr. 16
2. SPECIFICATIONS 2.1 MODEL NUMBER: LZ23KC524AS; LZ25KC604AS 2.2 ENGINE: 2.2.1 Engine Specifications: See your Engine Owner’s Manual 2.2.2 RPM: Full Speed: 3750 RPM (No Load) Idle: 1500 RPM 2.3 FUEL SYSTEM 2.3.1 Capacity: 11 gal. (42 L.) 2.3.2 Type of Fuel: Regular unleaded gasoline, 87 octane or higher 2.3.3 Fuel Filter: In-line 15 Micron Kohler P/N 2405002. 2.3.4 Fuel Shut-Off Valve: 1/4 turn increments (left tank, “OFF”, right tank) 2.4 ELECTRICAL SYSTEM
Inhaltszusammenfassung zur Seite Nr. 17
• Custom ride suspension system to enhance Standard Seat. • Deluxe suspension seat with high back, low profile foam-in-place cushion (dampened, adjustable spring suspension) and armrests. 2.6.2 Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other components. Held in tilted position with prop rod. Adjustable fore and aft seat track. 2.6.3 Armrests: Standard seat: foam padded flip-up armrests with height adjustment. Optional suspension seat: molded adjustable
Inhaltszusammenfassung zur Seite Nr. 18
2.10 DIMENSIONS 2.10.1 Overall Width: without deck deflector up deflector down w/52” Deck 49.8 in. (126.5 cm) 53.4 in. (135.6 cm) 64.2 in. (163.1 cm) w/60” Deck 53.8 in. (136.7 cm) 61.4 in. (156.0 cm) 72.2 in. (183.4 cm) 2.10.2 Overall Length: w/52” Deck w/60” Deck Roll Bar - Up 78.2 in. (198.7 cm) 78.2 in. (198.7 cm) Roll Bar - Down 88.9 in. (225.8 cm) 88.9 in. (225.8 cm) 2.10.3 Overall Height: Roll Bar - Up Roll Bar - Down 71.4 in. (181.4 cm) 53.3 in. (135.4 cm)
Inhaltszusammenfassung zur Seite Nr. 19
CAUTION POTENTIAL HAZARD ♦ Raising the rear of the unit for assembly relying solely on mechanical or hydraulic jacks could be dangerous. WHAT CAN HAPPEN ♦ The mechanical or hydraulic jacks may not be enough support or may malfunction allowing the unit to fall, which could cause injury. HOW TO AVOID THE HAZARD ♦ DO NOT rely solely on mechanical or hydraulic jacks for support. Use adequate jack stands or equivalent support. 3.2.3 Remove the wheel nuts from both sides of the unit and
Inhaltszusammenfassung zur Seite Nr. 20
3.2.5 Install the upper u-shaped section of the roll bar. (Reference Figure 3 for alignment and installation instructions below): a) Locate the latch pin assemblies (pin and hairpin connected with a lanyard). b) Install a 1/2-13 x 3 1/4 capscrew in the washer on the lanyard of each pin assembly. Note: Make sure the bent tab in the washer points toward the head of the capscrew. b) Lightly oil the inside surfaces of the ear-shaped plates at the upper end of the lower roll
