Inhaltszusammenfassung zur Seite Nr. 1
owner’s
19” MULCHING MOWER
manual
Model No.
C935-355190
• Assembly
• Operating Instructions
• Replacement Parts
• Warranty
CAUTION:
You must read and understand
this owner’s manual before
operating unit.
SEARS CANADA INC., TORONTO, ONTARIO M5B 2B8
P/N 598992-00 Rev. 1 JULY 2006 PRINTED IN MEXICO
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS Warranty................................................................................................................................................................................................i Safety....................................................................................................................................................................................................1 Assembly ...................................................................
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY RULES WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, ! ! electric shock, and personal injury, including the following: WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. WARNING: Some dust created by this product contains chemicals known to the State of California to cause cancer,
Inhaltszusammenfassung zur Seite Nr. 4
• REPAIRS AND SERVICE. Repairs, maintenance and any adjustments not • IF MOWER stalls, release switch lever to turn mower off, wait for blade to stop specified in this manual should be performed by authorized service centers or and unplug the cord before attempting to unclog the chute or remove other qualified service organizations, always using identical replacement anything from under the deck. parts. • AFTER STRIKING a foreign object, release switch lever to turn mower off, wait • USE OF ACCE
Inhaltszusammenfassung zur Seite Nr. 5
ASSEMBLY ASSEMBLING THE GRASSBAG (FIGURE 3A,3B,3C,3D) 4A 1. UNPLUG MOWER, AND WAIT FOR BLADE TO COME TO A COMPLETE STOP. 2. Before starting to assemble the grassbag to the frame, check that the grassbag and frame are similar to figure 3A. 3. Slide the grassbag onto the frame as shown in figure 3B. 4. Assemble the top clips to the frame as shown in figure 3C, then assemble the two side clips and the bottom clip last. 5. Completely assembled grasscatcher see figure 3D. 3A 3B 4B 3C 3D MU
Inhaltszusammenfassung zur Seite Nr. 6
OPERATION KNOW YOUR MOWER READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR MOWER. Compare the illustrations with your mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. UPPER HANDLE LOWER HANDLE SWITCH LEVER KNOBS GRASSBAG WHEEL HEIGHT ADJUSTMENT HEIGHT INDICATOR 4
Inhaltszusammenfassung zur Seite Nr. 7
OPERATION THE OPERATION OF ANY LAWNMOWER CAN RESULT IN FOREIGN OBJECTS THROWN INTO THE EYES, WHICH CAN RESULT IN SEVERE DAMAGE. ALWAYS WEAR SAFETY GLASSES OR EYE SHIELDS BEFORE ! STARTING YOUR LAWNMOWER AND WHILE MOWING. WE RECOMMEND WIDE-VISION SAFETY MASK FOR OVER THE SPECTACLES OR STANDARD SAFETY GLASSES, AVAILABLE AT SEARS RETAIL OR CATALOGUE STORES. NOTE: A lawnmower is a major appliance and should not be operated EXTENSION CORD TO ELECTRICAL OUTLET (FIGURE 7) simultaneously with other m
Inhaltszusammenfassung zur Seite Nr. 8
OPERATION WHEEL HEIGHT ADJUSTMENT (FIGURE 8) MULCHING TIPS 1. BEFORE MAKING ANY ADJUSTMENTS, TURN OFF, UNPLUG MOWER In the mulching configuration your new mower is designed to re-cut the grass AND WAIT FOR BLADE TO STOP. clippings into short lengths. 2. Your mower features the Sears one touch wheel height These clippings, which are dispersed as you mow will biodegrade quickly and adjustment system. This system will adjust all four wheels at the same time. provide nutrients for the lawn. 3.
Inhaltszusammenfassung zur Seite Nr. 9
SERVICE and ADJUSTMENTS REMOVING AND ATTACHING BLADES (FIGURE 9,10,11) SHARPENING AND BALANCING THE BLADE: (FIGURE 12,13) 1. RELEASE SWITCH LEVER TO TURN MOWER OFF, WAIT FOR THE BLADE 1. BE SURE THE SWITCH LEVER IS RELEASED AND THE BLADE HAS TO STOP, AND UNPLUG MOWER! STOPPED AND THE CORD UNPLUGGED BEFORE REMOVING THE BLADE. 2. Use a piece of 2x4 wood (about 2 feet long) to keep blade from turning 2. Remove blade from mower. See instructions for removing and attaching while removing blade
Inhaltszusammenfassung zur Seite Nr. 10
TROUBLE SHOOTING/CORRECTIVE ACTION GUIDE: PROBLEM CORRECTIVE ACTION -Motor will not start - Check fuse or circuit breaker to ensure power is to outlet. - Check extension cord with another electrical device to ensure cord is good. - Call a SEARS Service Center or other qualified service organization. -Motor keeps slowing down - The underside of the mower may be plugged with clippings, UNPLUG mower and clean out. - Grass may be too tall, try pushing at a slower pace, or raise cut height. - C
Inhaltszusammenfassung zur Seite Nr. 11
PICTURE OF UNIT WITH CALLOUTS 9
Inhaltszusammenfassung zur Seite Nr. 12
PARTS LIST 10
Inhaltszusammenfassung zur Seite Nr. 13
HOW TO ORDER REPAIR PARTS Each lawnmower has its own MODEL NUMBER. The MODEL NUMBER for the lawnmower will be found on a plate attached to your lawnmower at the REAR OF THE HOUSING. Always mention the MODEL NUMBER when requesting service or repair parts for your lawnmower. All parts listed herein may be ordered through SEARS CANADA INC. RETAIL OR CATALOGUE STORES AND SERVICE CENTRES. If the parts you need are not stocked owner’s locally, your order will be electronically transmitted to a SEARS P
Inhaltszusammenfassung zur Seite Nr. 14
12
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
TONDEUSE DE 48 cm Guide d’utilisation (19 po) Nº de modèle C935-355190 • Assemblage • Fonctionnement • Pièces de rechange • Garantie MISE EN GARDE Vous devez lire et comprendre les directives du présent guide avant d’utiliser l’appareil. SEARS CANADA INC., TORONTO, ONTARIO M5B 2B8 Pièce nº 598992-00 Rev. 1 Juillet 2006 IMPRIMÉ AUX MEXICO
Inhaltszusammenfassung zur Seite Nr. 17
TABLE DES MATIÈRES Garantie ................................................................................................................................................................................................i Mesures de sécurité................................................................................................................................................................................1 Assemblage ......................................................................
Inhaltszusammenfassung zur Seite Nr. 18
IMPORTANTES MESURES DE SÉCURITÉ ! AVERTISSEMENT : Afin de réduire les risques d’incendie, de secousses électriques ou de blessures lorsque vous utilisez ! des outils électriques, il faut toujours respecter les mesures de sécurité suivantes. AVERTISSEMENT : Le produit renferme des produits chimiques, dont du plomb. Selon l’état de la Californie, ce produit chimique peut causer le cancer ainsi que des malformations congénitales, et il présente d’autres dangers au système reproductif humain. Se
Inhaltszusammenfassung zur Seite Nr. 19
• DEMEURER VIGILANT. Travailler avec vigilance et faire preuve de bon sens. • RELACHER LE LEVIER de l’interrupteur pour arrêter la tondeuse avant de Ne pas se servir de l'outil lorsqu'on est fatigué ou après avoir ingéré des traverser les entrées et les chemins, ou lorsqu’on bascule le guidon. drogues ou de l’alcool. • LORSQUE LE MOTEUR CALE, relâcher l’interrupteur pour mettre la tondeuse • VÉRIFIER LES PIÈCES ENDOMMAGÉES. Avant d'utiliser de nouveau l'outil, hors tension, attendre l'immobilis
Inhaltszusammenfassung zur Seite Nr. 20
ASSEMBLAGE MONTAGE DU SAC À HERBE (FIGURES 3A, 3B, 3C ET 3D) 1. DÉBRANCHER L’OUTIL ET ATTENDRE L’IMMOBILISATION COMPLÈTE DE LA 4A LAME. 2. Avant de monter le sac sur le cadre, vérifier le sac et le cadre pour s’assurer qu’ils correspondent à ceux illustrés à la figure 3A. 3. Faire glisser le sac sur le cadre de la façon illustrée à la figure 3B. 4. Commencer par fixer les pinces supérieures (fig. 3C), puis les deux pinces latérales et, enfin, la pince inférieure. 5. Voir le sac complètement
