Inhaltszusammenfassung zur Seite Nr. 1
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 1
Universal
Rechargeable
Battery
MP3300/MP3400 User Guide
Inhaltszusammenfassung zur Seite Nr. 2
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 2
Inhaltszusammenfassung zur Seite Nr. 3
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 1 USER GUIDE Contents Overview ................................................................................................2 Getting Started........................................................................................2 Unpacking myPower ALL ....................................................................2 Getting to Know myPower ALL ..........................................................3 Charging myPower ALL ....................
Inhaltszusammenfassung zur Seite Nr. 4
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 2 Overview You can use myPower™ ALL—the universal rechargeable battery—to power just about any portable device. Simply connect myPower ALL to your portable DVD player, notebook computer, digital camera, digital camcorder, portable CD player, PDA, mobile phone, or other portable device to extend the battery life. As an added bonus, myPower ALL will charge the internal battery on some devices, while also powering the device. myPower ALL goes where you
Inhaltszusammenfassung zur Seite Nr. 5
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 3 Getting to Know myPower ALL Voltage Indicators/ Capacity Indicators Voltage Selector Voltage Lock Charging Indicator DC OUT For connection to device DC IN For connection to power adapter Charging myPower ALL myPower ALL will charge in four hours when completely empty. The green CHARGE indicator will turn on after the battery is 80% charged. Therefore, you should view the actual battery capacity before disconnecting the power adapter to stop charging
Inhaltszusammenfassung zur Seite Nr. 6
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 4 Using myPower ALL myPower ALL can be used to power and/or charge your portable device. With devices that require higher voltage levels, like notebook computers and portable DVD players, we recommend that you use myPower ALL only to power the device. You will find that powering without charging your higher voltage device will maximize the battery life of myPower ALL, thus letting you use your portable device even longer. To use myPower ALL to power
Inhaltszusammenfassung zur Seite Nr. 7
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 5 3. Connect the adapter plug to the power output cord (but not the device). If you are using a UA-xxx adapter (rather than PA-xxx), you must insert the L34 adapter that came with your myPower ALL between the adapter cord and UA-xxx adapter as shown. If you change the adapter plug while the power adapter L34 Adapter for cord is connected to myPower ALL, the voltage setting myPower ALL will reset to the lowest voltage (3V for MP3300, 5V for MP3400), wh
Inhaltszusammenfassung zur Seite Nr. 8
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 6 2. With the voltage lock in the unlocked position (switched right to VOLTAGE), set the voltage output to the voltage selection that is equal to or one increment higher than the voltage identified for your device. To do this, press the voltage selector until the voltage indicator turns on under the appropriate voltage selection (3, 4.5, 5, 6, 7.5, 9, 12, 14 for MP3300 and 5, 6, 7.5, 9, 12, 14, 16, 19 for MP3400). For example, if your device requir
Inhaltszusammenfassung zur Seite Nr. 9
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 7 3. Slide the voltage lock to the locked position (switched left to LOCK). This will prevent you from accidentally selecting a different voltage while your device is connected. 4. To change the voltage, slide the voltage lock to the unlocked position (VOLTAGE), and select a new voltage. Be sure to relock the voltage. TIP: You can optimize the use of myPower ALL with your notebook computer or portable DVD player by setting the voltage on myPower ALL
Inhaltszusammenfassung zur Seite Nr. 10
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 8 Connect the Portable Device 1. Connect the adapter plug into the power jack on the portable device. 2. Turn on the portable device and use it as you would normally. While connected, myPower ALL will power and charge your device. (As mentioned earlier, myPower ALL will not charge a device if the voltage setting is lower than that required.) or Leave the portable device turned off and myPower ALL will charge the device battery. 3. When finished, unp
Inhaltszusammenfassung zur Seite Nr. 11
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 9 CAPACITY INDICATOR Red Indicator 1-5% (Recharge before using) 1st Green Indicator 5-15% 2nd Green Indicator 15-25% 3rd Green Indicator 25-40% 4th Green Indicator 40-55% 5th Green Indicator 55-70% 6th Green Indicator 70-85% 7th Green Indicator 85-100% Recording Device Information The Device At-A-Glance Card included with myPower ALL enables you to record the information you need to use myPower ALL with each of your portable devices. Simpl
Inhaltszusammenfassung zur Seite Nr. 12
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 10 Troubleshooting If myPower ALL does not power the portable device or charge the device battery, take these steps: 1. Verify that the current consumption of the portable device is not more than 3.5 Amp. (3.5 Amp for both MP3300 and MP3400). If the device consumes more than the maximum provided by myPower ALL, the device will shut down when turned on and cannot be powered and/or charged by myPower ALL. 2. Verify that the device does not require mo
Inhaltszusammenfassung zur Seite Nr. 13
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 11 Limited Warranty The product enclosed herein is warranted to be free of operational defects for a period of one year from the date of purchase. In the event of a defect in operation during the warranty period Tekkeon, Inc. will replace the defective product when the owner returns all product contents. The limited warranty will be considered void if the unit is tampered with, subject to misuse, negligence or accidental damage, has been improperly se
Inhaltszusammenfassung zur Seite Nr. 14
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 12 Customer Support Customer support for myPower ALL is available at: Tekkeon, Inc. c/o myPower ALL 3002 Dow Avenue, #134 Tustin, CA 92780 888-787-5888 / 714-832-1266 www.tekkeon.com Tekkeon, Inc. must issue a Return Merchandise Authorization (RMA) number for all exchanges or refunds. www.tekkeon.com 12
Inhaltszusammenfassung zur Seite Nr. 15
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 13
Inhaltszusammenfassung zur Seite Nr. 16
mpALL_33_3400_ug_fnl 3/12/07 3:28 PM Page 14 www.tekkeon.com © 2007 Tekkeon, Inc. Rev B All Rights Reserved myPower™ is a trademark of Tekkeon, Inc. Cut loose. Stay loose.
