Inhaltszusammenfassung zur Seite Nr. 1
RMB1865
RMB1865E
BOOM MOWER
HYDRAULIC BOOM CUTTER
Published 04/11
PARTS MANUAL
SECTION 93
Inhaltszusammenfassung zur Seite Nr. 2
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in pro- cessing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organiza- tion ordering the p
Inhaltszusammenfassung zur Seite Nr. 3
To the Owner/Operator/Dealer All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense!
Inhaltszusammenfassung zur Seite Nr. 4
LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state and municipalities’ use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement or repair pa
Inhaltszusammenfassung zur Seite Nr. 5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 ALPHABETICAL INDEX RMB11865 / 1865E BOOM MOWER ITEM PAGE NUMBER 100 LPM DRIVE MODULE - SUPERCUT AND MULTICUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-1-44 CAB CONTROL MOUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-1-38 CABLE ACV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 SAFETY DECALS (BOOM) REF. PART DESCRIPTION QTY. NO. NO. 1 D433 Decal, Multi Hazard 1 2 D388 Decal, Driveline Hazard 1 3 D355 Decal, Important Check Chains 1 4 02962764 Decal, Warning Pinch Point 6 5 02962765 Decal, Danger Crushing Hazard 1 6 02965262 Decal, Warning Oil Leak 1 7 D354 Decal, Danger Crushing Hazard 1 8 50065309 Decal, Bush Hog Logo 14.85” 1 9 50068739 Decal, Model No. 1865 2 10 50061049 Decal, Bush Hog Logo (22”) 1 11 D524
Inhaltszusammenfassung zur Seite Nr. 8
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 SAFETY DECALS (CUTTER HEAD) REF. PART DESCRIPTION QTY. NO. NO. 1 50061049 Decal, Bush Hog Logo (22”) 1 2 24028 Decal, Deflector Warning 1 3 02965141 Decal, Warning Thrown Objects 1 4 1290738 Decal, Instruction 1 5 09.821.35 Decal, Instruction Multi 1 6 1458392 Reflector, Red 2 7 1458393 Reflector, Yellow 2 8 09.810.01 Decal, Instruction Grease 2 93-1-2
Inhaltszusammenfassung zur Seite Nr. 9
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 STABILIZER REF. PART DESCRIPTION QTY. NO. NO. 1 431217 Linch Pin, Med.7/16 2 2 21160.03 Pto Hook Support-Plated 1 3 21370.07 Top Link Assy - 357 To 517mm 1 4 21388.01 Plastic Insert 45mm Dia 4 5 21883.01 Sleeve Hfs Tube 38.6 X 6.3 Wal 1 6 22072.01 Quadrant Pin-Stabilizer 1 7 41205.13 Narrow Nose Stabilizer W.A. 1 8 45999.04 Spacer 55 X 40.5 X 9 2 9 45999.05 Spacer Sleeve 2 10 7196045 Hose Tie- 350.0lg 1 11 7499506c Stabilizer Tongue Cat
Inhaltszusammenfassung zur Seite Nr. 10
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 MAIN ARM REF. PART DESCRIPTION QTY. NO. NO. 1 0901121 Grease Nipple,1/8 2 2 22522.01 Hose Guard W/A Black 1 3 45202.06 Lift Base Pin W/Assy 2 4 45318.05 Main Arm RMB1865/RMB1865E 1 5 06.430.18 Clamp,Lower Hose 2 6 7115208 Bushing 40 X 44 X 40 4 7 7193063 1"Bsp Pair Hose Clamps 2 8 9100105 Flatwasher 10.5 X 23.5 X 2.0 2 9 9100404 Washer, M8 External Shakeproof 2 10 9163005 Nut M10 Nyloc 4 11 9213205 Capscrew M10 X 100 2 12 9313055 Capsc
Inhaltszusammenfassung zur Seite Nr. 11
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 DIPPER ARM REF. PART DESCRIPTION QTY. NO. NO. 1 08.297.04 Bushing 37 X 30 X 30 2 2 0901121 Grease Nipple,1/8 5 3 22522.04 Hose Guard W/A Black 1 4 42684.07 Pin W/A Dipper Ram 1 5 45063.14 RH Dipper Arm W.A. 1 6 45202.01 Pin W/A - T/Link Outer 1 7 45264.03 Main Pivot Pin 1 8 45630.01 Clamp,Hose 4 9 7136035 Bushing,Flail Head 2 10 9100105 Flatwasher, 10.5 X 23.5 X 2.0 2 11 9100206 Lockwasher 12mm 1 12 9100404 Washer, M8 External Shakeproo
Inhaltszusammenfassung zur Seite Nr. 12
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 HEAD, ANGLING 93-1-6
Inhaltszusammenfassung zur Seite Nr. 13
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 HEAD, ANGLING REF. PART NO. NO. DESCRIPTION QTY. 1 0423556 Spring Dowel 5/8in X 3-1/2in 1 2 05.281.18 Flat Washer 30mm - Plated 2 3 08.297.04 Bushing 37 X 30 X 30 4 4 0901121 Grease Nipple,1/8 2 5 42646.03 Radius Arm 1 6 42646.04 Radius Arm 1 7 21801.01 Slave Link Casting 1 8 42648.01c Jaw Plt Cast 30.0 Pivots 1 9 42649.01 Pivot Tube 1 10 42684.01 Pin 1 11 42684.05 Pin - 30mm X 116 Lg 1 12 43055.09 Hose Brkt 1.5/16 Jic 1 13 7198333 Hose
Inhaltszusammenfassung zur Seite Nr. 14
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 PILLAR, RH 93-1-8
Inhaltszusammenfassung zur Seite Nr. 15
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 PILLAR, RH REF. PART NO. NO. DESCRIPTION QTY. 1 0901121 Grease Nipple, 1/8 6 2 45192.10 RH Pillar 1 3 45202.04 Pin W/A - Slew Rod 1 4 45202.07 Pin W/A - Left Ram Base 1 5 45264.03 Main Pivot Pin 1 6 45271.01 Pivot Pin 2 7 45298.01 Thrust Washer 75 X 41 X 5 1 8 45416.01 Screw, Special M12 X 40 Drilled 1 9 9100206 Lockwasher, 12mm 1 10 9163005 Nut M10 Nyloc 2 11 9163006 Nut Nyloc M12 2 12 9213136 Capscrew M 12-P1.75- 65mm 1 13 9313075 C
Inhaltszusammenfassung zur Seite Nr. 16
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 MAINFRAME 93-1-10
Inhaltszusammenfassung zur Seite Nr. 17
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 MAINFRAME REF. PART NO. NO. DESCRIPTION QTY. 1 0431105 Pin, Cotter 2 2 0431217 Linch Pin, Med.7/16 2 3 0901121 Grease Nipple, 1/8 1 4 41559.01 Linkage Pin Cat 2 2 5 43332.01 Spacer, 15 Lg. 2 6 43332.02 Spacer, 10 Lg. 2 7 45193.10 RH Mainframe 1 8 45202.05 Pin 1 9 45210.01 Plug, Plastic, Square 6 10 45293.01 Stand Leg Lh 1 11 45293.02 Stand Leg Rh 1 12 45297.01 Leg Pin 2 13 7115208 Bushing 40 X 44 X 40 Glacier 2 14 7136330 Driveline, 2
Inhaltszusammenfassung zur Seite Nr. 18
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 SHIELDING 93-1-12
Inhaltszusammenfassung zur Seite Nr. 19
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 SHIELDING REF. PART NO. NO. DESCRIPTION QTY. 1 21612.01 Pop Rivet Dia 4.8 X 16 Lg 4 2 21726.31 Sponge Pad 2 3 22472.02 RH Cover & Valve Mtg 1 4 22476.04 RH Rear Cover W.A. 1 5 22477.03 Tank Top Cover 1 6 22513.02 RH Valve Cover 1 7 22531.01 Blanking Plate-Rear Cover 1 8 43449.02 Overcentre Fastener 1 9 46007.01 Hook-Small 1 10 9100105 Flatwasher, 10.5 X 23.5 X 2.0 4 11 9100205 Lockwasher- 10mm Dia. Bzp 4 12 9300164 Taptite M6 X 12 4 13
Inhaltszusammenfassung zur Seite Nr. 20
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL APRIL, 2011 HYDRAULIC TANK 93-1-14
