Inhaltszusammenfassung zur Seite Nr. 1
®
BUSH HOG
GEARDRIVE HAY MOWERS
Models
HM2007, HM2008, & HM2009
Operator’s Manual
ASSEMBLY OPERATION MAINTENANCE
1100
$4.00 Part No. 50030712
Inhaltszusammenfassung zur Seite Nr. 2
CONGRATULATIONS! You have invested in the best implement of its type on the market today. The care you give your Bush Hog implement will greatly determine your satisfaction with its performance and its service life. We urge a careful study of this manual to provide you with a thorough understanding of your new implement before operating, as well as suggestions for operation and maintenance. If your manual should become lost or destroyed, Bush Hog will be glad to provide you with a new copy. Orde
Inhaltszusammenfassung zur Seite Nr. 3
HAY MOWER TABLE OF CONTENTS SECTION PAGE SECTION PAGE Stabilizer.........................................................25 Warranty...........................................................2 Lifting Height ..................................................25 Dealer Preparation Check List .........................3 Transport - Unhitching....................................27 Safety Alert Symbols........................................4 Maintenance......
Inhaltszusammenfassung zur Seite Nr. 4
® BUSH HOG LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and municipalities’ use and ninety (90) days for commercial use from date of retail sale. The obligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defective parts. Replacement o
Inhaltszusammenfassung zur Seite Nr. 5
DEALER PREPARATION CHECK LIST HAY MOWER BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator’s Manual as a guide. ❒ 1. Assembly completed. ❒ 2. Gearbox filled with oil. ❒ 3. All fittings lubricated. ❒ 4. All shields in place and in good condition. ❒ 5. All fasteners torqued to specifications given in Torque Chart. ❒ 6. All decals in place and readable. (See decal page.) ❒ 7. Overall condition good (i.e. paint, welds) ❒ 8. Operators manual has been delivered
Inhaltszusammenfassung zur Seite Nr. 6
Safety Alert Symbol This Safety Alert Symbol means: “ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” This symbol is used to call attention to safety precautions that should be followed by the operator to avoid accidents. When you see this symbol, carefully read the message that follows and heed its advice. Failure to comply with safe- ty precautions could result in death or serious bodily injury. Safety Signs Signal Words The signal words DANGER, WARNING, AND CAUTION are used on the equipm
Inhaltszusammenfassung zur Seite Nr. 7
IMPORTANT SAFETY PRECAUTIONS This symbol is used to call attention to safe- ty precautions that should be followed by the operator to avoid accidents. When you see this symbol, carefully read the message that follows and heed its advice. Failure to comply with safety precautions could result in serious bodily injury. In addition to the design and configuration of equipment, hazard control and accident prevention are depen- dent upon the awareness, concern, prudence and proper training of pe
Inhaltszusammenfassung zur Seite Nr. 8
IMPORTANT FEDERAL LAWS AND REGULATIONS* CONCERNING EMPLOYERS, EMPLOYEES AND OPERATIONS. *(This section is intended to explain in broad terms the concept and effect of the following federal laws and regulations. It is not intended as a legal interpretation of the laws and should not be considered as such). U.S. Public Law 91-596 (The Williams-Steiger Occupational and Health Act of 1970) OSHA This Act Seeks: “...to assure so far as possible every working man and woman in the nation safe and health
Inhaltszusammenfassung zur Seite Nr. 9
Models HM2007 - HM2008 - HM2009 Model HM2007 - 3680 mm (145”) Model HM2008 - 4060 mm (160”) Model HM2009 - 4440 mm (175”) Transport 1170 mm (46”) Model HM2007 - 1900 mm (75”) Model HM2008 - 2280 mm (90”) 160 mm (6-1/4”) Model HM2009 - 2660 mm (105”) 1040 mm (41”) 1095 mm (43”) (All measurements are approximate and stated in mm and inches) 7 860 mm (34”) 1050 mm (42”) 555 mm (22”) 600 mm (24”) 1110 mm (44”)
Inhaltszusammenfassung zur Seite Nr. 10
Technical Data (Conversion table - see page 46 ). Model HM2007 Model HM2008 Model HM2009 Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . kg (lb.) 415 (915) 440 (970) 465 (1025) P.T.O. (Input speed) . . . . . . . . . . . . . . . . . . rpm 540 540 540 Power requirement, min. . . . . . . . . . . . kW (HP) 30 (40) 33 (45) 37 (50) P.T.O. shaft with overrun clutch . . . . . . . . . . . . . Standard Standard Standard Number of discs . . . . . . . . . . . . . . . . . . . . . . pcs. 5 6 7 N
Inhaltszusammenfassung zur Seite Nr. 11
Machine Identification The machine serial number and manufacturer information can be found on the metal plate, as shown. 9
Inhaltszusammenfassung zur Seite Nr. 12
kg / lb. 6 10
Inhaltszusammenfassung zur Seite Nr. 13
Safety Any operator, repairer and owner must be familiar with the warning instructions for the machine in this manual, before operations commence. Always work carefully with agricultural machinery. Read through and observe the safety instructions in this manual. Safety is your responsibility. Pay particular attention to this symbol. It means that there could be a serious hazard. It emphasizes precautions which have to be complied with in order to prevent accidents. This symbol can be fo
Inhaltszusammenfassung zur Seite Nr. 14
12
Inhaltszusammenfassung zur Seite Nr. 15
Safety guards. Make sure that ALL GUARDS are in good order and fitted correctly. Do no attempt to start the machine before ensuring this. Pay particular attention to the plastic guards of the PTO shaft. If damaged they must be replaced. The chain locks of the guards MUST always be fitted on a suitable place on the tractor and the machine to prevent the outer plastic guards turning. Hydraulics. Be very careful when dealing with hydraulics. Use eye protection and gloves. Escaping hydraul
Inhaltszusammenfassung zur Seite Nr. 16
C A B Model Kg ( lb.) D HM2007 415 (915) HM2008 440 (970) HM2009 465 (1025) 14
Inhaltszusammenfassung zur Seite Nr. 17
Safety instructions during crane lift Only use approved crane material. The machine must be in working position. Weight is stated on the drawing. Make sure that crane straps are securely fastened before lifting. Use a guide rope (not shown) to keep the machine in position. Be careful - make sure that nobody stand under or near the machine when it is being lifted. Fasten chain (A) on the machine as shown. Lift the machine in crane bracket (B). Use support rope, minimum 6 mm (1/4”) nylon rop
Inhaltszusammenfassung zur Seite Nr. 18
16
Inhaltszusammenfassung zur Seite Nr. 19
New Machine - be careful Read the directions for use. Great care must be taken, when starting up a new machine. Incorrect mounting, wrong operations, etc., can result in expensive repairs and loss of profits. Bush Hog’s factory warranty is voided if the instructions of this manual are not adhered to. NOTICE Be especially attentive to the following when starting a new machine. Check that the machine is mounted correctly, and that it is not damaged. Machines with hydraulic stabilizer: Be
Inhaltszusammenfassung zur Seite Nr. 20
HM2009 HM2009 HM2007, HM2008 HM2008 HM2007 18 215 mm (8-1/2”) 290 mm (11-1/2”)
