Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
C Your Local Agent/Dealer 9- 52, A s hi har a- c ho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 FIRST EDITION : MAR. 1997 All rights reserved. Printed in Japan G : MAR. 7, 2001 PUB. No. OME-43861 GP-1610CF (DAMI)
Inhaltszusammenfassung zur Seite Nr. 3
SAFETY INSTRUCTIONS Safety Instructions for the Operator WARNING CAUTION Use the proper fuse. Do not open the equipment. Use of a wrong fuse can result in fire or Hazardous voltage which can permanent equipment damage. cause electrical shock, burn or serious injury exists inside the GPS position and velocity accuracies equipment. Only qualified are controlled by the U.S. Department personnel should work inside of Defense. Position may be degraded the equipment. up to 100 meters. Do not disas
Inhaltszusammenfassung zur Seite Nr. 4
Safety Instructions for the Installer CAUTION WARNING Ground the equipment to Do not work inside the prevent electrical shock equipment unless totally and mutual interference. familiar with electrical circuits. Confirm that the power supply voltage Hazardous voltage which can is compatible with the voltage rating shock, burn or cause serious of the equipment. injury exists inside the equip- ment. Connection to the wrong power supply can cause fire or equipment damage. The Turn off the power at
Inhaltszusammenfassung zur Seite Nr. 5
TABLE OF CONTENTS BY SUBJECT 3.14 Displaying the Water Temperature FOREWORD Graph ............................................. 3-6 A Word to GP-1610CF Owners .................iv 3.15 Selecting Unit of Water Features....................................................... v Temperature Measurement ............ 3-7 System Configuration ................................vi 3.16 Offsetting Water Temperature Readout.......................................... 3-7 INSTALLATION 3.17 Fish Alarm ............
Inhaltszusammenfassung zur Seite Nr. 6
WAYPOINTS, ROUTES CUSTOMIZING THE DISPLAY 7.1 Entering Waypoints ....................... 7-1 13.1 Plotter Display Marker 7.2 Erasing Individual Waypoints ....... 7-3 Attributes ..................................... 13-1 7.3 Changing Waypoint Position ......... 7-3 13.2 Chart Attributes ........................... 13-1 7.4 Changing Waypoint Mark Size ..... 7-4 13.3 Unit of Distance Measurement.... 13-2 7.5 Entering Routes ............................. 7-4 13.4 Chart Range or Scale Indication.. 13
Inhaltszusammenfassung zur Seite Nr. 7
TABLE OF CONTENTS BY DISPLAY ITEM SOUNDER PLOTTER DISPLAY DISPLAY (Page 2-3) (Page 2-5) Waypoint (Page 7-1) 0 01 Chart (Page 4-4) Course bar (Page 13-1) 50 Arrival alarm range (Page 9-2) Grid (Page 13-1) Flag (destination) (Page 8-1) 100 Course to destination (Page 8-1) Marks (Page 6-1) Fish school (Page 3-10) 150 Own ship mark (Page 5-1) Cross-track error Bottom (Page 3-10) alarm range (Page 9-2) Track (Page 5-1) 50k 200 L Sounder frequency (Page 2-5) Icons (Page A-4) H L CSE 350.0° SPD 1
Inhaltszusammenfassung zur Seite Nr. 8
FOREWORD A Word to GP-1610CF Owners Congratulations on your choice of the FURUNO GP-1610CF COLOR GPS PLOTTER SOUNDER. We are confident you will see why the FURUNO name has become synonymous with qual- ity and reliability. For over 40 years FURUNO Electric Company has enjoyed an enviable reputation for innovative and dependable marine elec- tronics equipment. This dedication to excellence is furthered by our extensive global network of agents and dealers. This equipment is designed and constructe
Inhaltszusammenfassung zur Seite Nr. 9
Features The GP-1610CF is a totally integrated GPS receiver, color video plotter and color video sounder. It mainly consists of a display unit and a GPS antenna. Navigation information is displayed on a bright 5.6-inch color TFT LCD. On-screen information shown are position, range and bear- ing to cursor position, range, bearing, ETA and TTG to waypoint, etc. A high sensitivity receiver tracks up to eight satellites simulta- neously. An 8-state Kalman filter ensures optimum accuracy in determina
Inhaltszusammenfassung zur Seite Nr. 10
System Configuration The GP-1610CF mainly consists of a display unit and a GPS an- tenna. A dual frequency transducer is optionally available. The chart card drive in the display unit loads electronic charts. External equip- ment which can be connected include water temperature and speed sensors, autopilot, and DGPS beacon receiver. ANTENNA UNIT Receives signal from GPS satellite. DISPLAY UNIT Ship’s position is calculated in longitude and latitude from signal received from the an- tenna unit an
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLATION 1.1 Equipment Lists Standard supply Ne o.Ne am T. yp CyodeNoQs tRemark 1tDisplayUniGP-1610CF-E 1 2tAntennaUniGPA-016 1 Installation 3 C8 P86-003000t00-041-031se Materials SP86-00300 4sSparePart 0t 04-394-6401se Optional equipment Ne o.Ne am T. yp CsodeNoRemark 30m,for antennacable C0 P20-01700004-372-11 extension Antenna 1 cableset 50m,for antennacable C0 P20-01710004-372-12 extension Right-angle 2 N9 o.13-QA330000-803-23 antennabase L-angle 3 N0 o.13-QA310000-803-24 antennabase For
Inhaltszusammenfassung zur Seite Nr. 12
Optional equipment (con't) Ne o.Ne am T. yp Cs odeNoRemark 520-5PSD 000-015-125 With8m 56 20-5PWD000-015-12cable,transom 8rTransduce mount With8mcable 57 20-5MSD000-015-12andwaterproof connector Dual 54 24ST-MSD000-015-22 9frequency 58 20ST-PWD000-015-12 transducer 6P-4P,10m M6 J-A6SPF0011-100000-132-33 6P-4P,5m M4 J-A6SPF0011-050000-132-24 6P-6P,10m M7 J-A6SPF0012-100000-133-81 1.0Cableassy 6P-6P,5m M4 J-A6SPF0012-050000-134-42 7P-6P,5m M1 J-A7SPF0003-050000-136-730-0 forDGPS Innerhull 11 282S0
Inhaltszusammenfassung zur Seite Nr. 13
1.2 Installation of Standard Equipment Installing the display unit Mounting considerations The display unit can be installed on a tabletop or on the overhead. When selecting a mounting location for the display unit keep the following in mind: • Keep the display unit out of direct sunlight. • The temperature and humidity should be moderate and stable. • Locate the unit away from exhaust pipes and vents. • The mounting location should be well ventilated. • Mount the unit where shock and vibration
Inhaltszusammenfassung zur Seite Nr. 14
Tabletop mounting Cutting size for flushmount Dummy cover Figure 1-2 Display unit mounting methods Installing the antenna unit Mounting considerations When selecting a mounting location for the antenna unit, keep in mind the following points: • Select a location out of the radar beam. The radar beam will obstruct or prevent reception of the GPS satellite signal. • Be sure the location offers a clean line-of-sight to satellite. Ob- jects within line-of-sight to a satellite, for example, a mast or
Inhaltszusammenfassung zur Seite Nr. 15
Figure 1-3 Typical antenna unit mounting locations Antenna unit mounting procedure You will need a medium size slotted-head screwdriver and vinyl tape. The standard antenna is usually fastened to a length of pipe and fastened to a mast. (A mast mount fixture is optionally available for this.) The threaded antenna base accepts a standard antenna mount with a 1"-14 straight thread. Mount the antenna on a length of pipe with a 1"-14 threaded end. 1. Pass the antenna cable through the pipe. Fasten t
Inhaltszusammenfassung zur Seite Nr. 16
2. Screw the pipe into the antenna. DO NOT USE TOOLS TO FASTEN THE ANTENNA TO ITS MOUNTING; ONLY HAND TIGHTEN. Pipe Figure 1-5 Fastening pipe to antenna 3. Tape the junction between the pipe and antenna unit with vinyl tape. Taping Figure 1-6 Taping the antenna 4. Attach the mounting fixture to the mast and set the pipe with antenna to the mounting fixture. Mast Mounting fixture (note direction) Figure 1-7 Attaching antenna to mounting fixture 1-6
Inhaltszusammenfassung zur Seite Nr. 17
5. Tape the antenna unit, mounting fixture and mast with vinyl tape. Vinyl tape Figure 1-8 Securing antenna to mast with vinyl tape 6. Attach a clamp to the antenna unit and tighten. Leaving some slack in the antenna cable as shown, fix it with vinyl tape. Slotted-head screwdriver Clamp Leave slack in cable. Vinyl tape Figure 1-9 Fixing the antenna cable with vinyl tape 1-7
Inhaltszusammenfassung zur Seite Nr. 18
Wiring All wiring are terminated at the rear of the display unit. Power cable Connect the power cable to the power connector. Connect the leads to the battery (12 or 24 VDC); white to plus(+) terminal and black to minus(-) terminal. Cable connector Power cable w/fuse (3A) Lead wire Black White BATTERY Figure 1-10 Connecting the power cable to the battery Antenna unit Connect the antenna unit cable to the GPS ANT connector. Transducer Connect the transducer cable to the XDR connector. Ground The
Inhaltszusammenfassung zur Seite Nr. 19
ANTENNA UNIT DISPLAY UNIT Earth terminal Earth DPGS beacon receiver Ext. equip. Black White Shield TRANSDUCER Figure 1-11 Display unit, rear view 1-9
Inhaltszusammenfassung zur Seite Nr. 20
1.3 Installation of Transducers Installing the inside-hull mount transducer Necessary tools You will need the following tools: • Sandpaper (#100) • Silicone sealant • Silicone grease Remarks on installation • Do the installation with the boat hauled out of the water. • Turn off the engine while installing the equipment. • Install the transducer in the engine room. Selecting the mounting location Keep the following points in mind when selecting a mounting lo- cation: • The mounting location shou
