Bedienungsanleitung Schumacher Manual SE-1

Inhaltszusammenfassung zur Seite Nr. 1

Plug-In Wall Battery Charger
 1-Amp Trickle Charge – 120V plug-in
 Manual Operation
 Reverse-Hookup Protection
 Convenient 12-Foot Power Cord
 Applications – Charge small batteries,
keep larger batteries warm in cold temperatures.
Model SE-1

Inhaltszusammenfassung zur Seite Nr. 2

Mountable Maintainer  1.5-Amp Trickle Charge – 120V plug-in – charges in 2 to 12 hours  LEDs - indicate Power On and Charged  Fully Automatic – once battery is charged, unit switches from full charge to float-mode monitoring  “On-Board” Feature – comes complete with hardware & bracket to mount charger next to battery  Reverse-Hookup Protection  Molded Plastic Case  Short Leads For Safety – minimize chance of getting tangled in moving engine parts Model SE-1-12S

Inhaltszusammenfassung zur Seite Nr. 3

Battery Charger  1-Amp Trickle Charge – 120V plug-in,  Manual Operation  50-Amp Clamps  Quick-Disconnect Harness  Utilize ring connector and only hook harness up once  No need to remove battery again to charge  Both the 50-Amp clamp & ring connectors snap into place in seconds  Reverse-Hookup Protection  Molded Plastic Case Model MC-1

Inhaltszusammenfassung zur Seite Nr. 4

Metal Hand-Held Linear Battery Charger  Manual Operation  Rugged Durable Metal Case  Top Mounted Carrying Handle Model SE-1010-2 Model SE-82-6  10-Amp Fast Charge –charges a  6-Amp Medium Charge – charges battery in 3 to 5 hours most batteries in 6 to 8 hours  2-Amp Trickle Charge – charges a  2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours small 12 volt battery in 2 to 12 hours

Inhaltszusammenfassung zur Seite Nr. 5

Metal Hand-Held Linear Battery Charger  Fully Automatic/Manual Operations  Rugged Durable Metal Case Model SE-40MAP Model SE-520MA  Top Mounted Carrying Handle  10-Amp Fast Charge – charges a  10-Amp Fast Charge – charges a battery in 3 to 5 hours battery in 3 to 5 hours  2-Amp Trickle Charge – charges a small 12 volt battery in 2 to 12 hours  LED- shows Fully Charged

Inhaltszusammenfassung zur Seite Nr. 6

Metal Hand-Held Linear Battery Charger/Starter  Manual Operation  Rugged Durable Metal Case  Top Mounted Carrying Handle Model SE-1052 Model SE-1250  50-Amp Engine Start – for emergency  50-Amp Engine Start – for starting emergency starting  10-Amp Fast Charge – charges a battery  30-Amp Boost – for quick charges in 3 to 5 hours  10-Amp Fast Charge – charges a  2-Amp Trickle Charge – charges a small battery in 3 to 5 hours 12 volt battery in 2 to 12 hours

Inhaltszusammenfassung zur Seite Nr. 7

Metal Hand-Held Linear Battery Charger/Starter  Fully Automatic  2 LEDs  Rugged Durable Metal Case  Top Mounted Carrying Handle Model SE-5212A Model SE-1275A Model SE-1510MA  50-Amp Engine Start – for  75-Amp Engine Start – for  100-Amp Engine Start – for emergency starting emergency starting emergency starting  10-Amp Fast Charge – charges  12-Amp Fast Charge –  15-Amp Fast Charge – charges a a battery in 3 to 5 hours charges a battery in 2 to 5 battery in 2 to 4 hours hours  2

Inhaltszusammenfassung zur Seite Nr. 8

Metal Hand-Held Linear Charger/Starter  Fully Automatic/Manual Operation  2 LEDs  Rugged Durable Metal Case  Top Mounted Carrying Handle Model SE-2151MA Model SE-125A  100-Amp Engine Start – for emergency  125-Amp Engine Start – for emergency starting starting  15-Amp Fast Charge – charges a  15-Amp Fast Charge – charges a battery in battery in 2 to 4 hours 2 to 4 hours  2-Amp Trickle Charge – charges a  2-Amp Trickle Charge – charges a small, 12 small 12 volt battery in 2 t

Inhaltszusammenfassung zur Seite Nr. 9

Metal Hand-Held Linear Charger/Starter  10-Amp Fast Charge – Charges a deep-cycle battery in 7 to 11 hours. Charges an automotive battery in 3 to 5 hours  Flexible Function – select manual or fully automatic function for special applications  Fully Automatic - once battery is charged, unit switches on and off as needed  Rugged Durable Metal Case  Top Mounted Handle Model SE-70MA

Inhaltszusammenfassung zur Seite Nr. 10

Multiple Battery Charger  10 or 5-Amp Charge Rate  Manual Operation  Rotary Switch Selection  Includes 5 Jumpers – for connecting batteries in series  Charge Up to Six 12V or Twelve 6V Batteries  Dual-rate Output  Safety – has overload & short-circuit protection  Rugged Durable Metal Case  Top Mounted Carrying Handle  Applications – 6V & 12V batteries, hooked Model SE-1072 up in 12, 24, 36, 48, 60 or 72 Volt configurations 12V 6V

Inhaltszusammenfassung zur Seite Nr. 11

Signature Series Linear Battery Charger  Rugged Polypropylene Case  Built-In Top Mounted Carrying Handle Model 520A-PE Model 82-6-PE  10-Amp Fast Charge – charges a 12V battery in 3  6-Amp Medium Charge Rate – Charges a 12V to 5 hours battery in 6 to 8 hours  2-Amp Trickle Charge – charges a small 12 volt  2-Amp Trickle Charge – charges a small 12- battery in 2 to 12 hours Volt battery in 2 to 12 hours  Fully Automatic  Manual Operation  2 LEDs – signals Power On and Fully Charged

Inhaltszusammenfassung zur Seite Nr. 12

Signature Series Linear Battery Charger/Starter  Rugged Polypropylene Case  Built-In Top Mounted Carrying Handle Model 5216A-PE Model 1050-PE  50-Amp Engine Start – for emergency starting  50-Amp Engine Start – for emergency starting  10-Amp Fast Charge – charges a 12V battery  10-Amp Fast Charge – charges a 12V battery in 3 to 5 hours in 3 to 5 hours  2-Amp Trickle Charge – charges a small 12V  2-Amp Trickle Charge – charges a small 12V battery in 2 to 12 hours battery in 2 to 12

Inhaltszusammenfassung zur Seite Nr. 13

Speed Charge Maintainer  1.5-Amp Charger and Maintainer  Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring  Microprocessor Controlled  Automatic Voltage Detection  Automatic Temperature Compensation  Thermal Runaway Protection  Safety Start – charger will not supply current to battery until it is properly connected to a battery.  LEDs – indicate Charging, Charged and Power  Quick-Disconnect Harness Model SEM-1562A  Utilize ring connec

Inhaltszusammenfassung zur Seite Nr. 14

SpeedCharge Battery Charger  Microprocessor Controlled  LEDs Indicate – Charging, Charged and Trouble  Safety Start  Fully Automatic – once battery is charged, unit switches from Full Charge to Float-Mode Monitoring  Quick-Disconnect Harness - Utilize ring connector and only hook harness up once The 50-Amp clamps snap into place in seconds! Model SC-300A Model SC-200A Use male adaptor plug to recharge booster  3-Amp Charge – 120V  2-Amp, 12V Charge – 120V packs or plug-in,

Inhaltszusammenfassung zur Seite Nr. 15

SpeedCharge Battery Charger  Microprocessor Controlled  Thermal Runaway Protection  Safety Start  Electronic Push Button Controls  Sturdy, Built-In Handle  Molded Polypropylene Case Model SC-600A Model SC-1000A  6-Amp Medium Charge – charger monitors battery  10-Amp Medium Charge – charger monitors battery condition and automatically adjusts charging rate, condition and automatically adjusts charging rate, preventing battery damage preventing battery damage  4-Amp Medium Charge – sel

Inhaltszusammenfassung zur Seite Nr. 16

SpeedCharge Battery Charger  12-Amp Fast Charge – charger monitors battery condition and automatically adjusts charging rate, preventing battery damage  8-Amp Medium Charge – self-adjusting charge rate ideal for everyday charging needs  2-Amp Slow Charge – for charging small batteries and maintaining large ones  50-Amp Clamps – offer versatility for top and side- mounted battery posts  Microprocessor Controlled  Thermal Runaway Protection  Safety Start - charger will not supply curren

Inhaltszusammenfassung zur Seite Nr. 17

SpeedCharge Hybrid Battery Charger/Starter/Tester  Microprocessor Controlled  Thermal Runaway Protection  Safety Start  Charging Status LEDs  Electronic Touch Pad Controls  125-Amp Sure-Grip Clamps  Retractable Handle  Built-In Digital Voltmeter/Tester  Molded Polypropylene Case Model SC-8020A Model SC-10030A  80-Amp engine start  100-Amp engine start  10 ◄►20-Amp fast charge  12 ◄►30-Amp fast charge  2-Amp Trickle Charge  2-Amp Trickle Charge

Inhaltszusammenfassung zur Seite Nr. 18

SpeedCharge Ship N’ Shore High Frequency Charger  Microprocessor Controlled  Thermal Runaway Protection  Safety Start  Charging Status LEDs  Electronic Push Button Controls  Molded Polypropylene Case Model SSC-1500A Model SSC-1000A  10-Amp Fast Charge – charger monitors battery  15-Amp Fast Charge – charger monitors battery condition and automatically adjusts charge rate, condition and automatically adjusts charge rate, preventing battery damage for car, truck, marine, preventing batt

Inhaltszusammenfassung zur Seite Nr. 19

Signature Series Ship N’ Shore Battery Charger  Fully Automatic  LED Indicators  Reverse-Hookup Safeguard  Built-in Convenient Carrying Handle Model SS-120A-PE Model SS-51A-PE  12-Amp FAST Charge  10-Amp Fast Charge – ideal for  Flexible Function – manual or automatic everyday charging needs  Microprocessor Controlled

Inhaltszusammenfassung zur Seite Nr. 20

Ship N’ Shore Battery Charger  True 10-Amp Charge for–  Single 12V battery  Two 12V Batteries in a two-battery, 24-Volt system  True 20-Amp Charge – for single 12-Volt battery  Fully Automatic  Multiple Marine Capabilities – comes complete with two sets of output cords  Microprocessor Controlled – dedicated processor for each independently controlled bank  Safe – ignition protected, non-sparking battery leads allow safe charging, even on board  Electrically Independent Outputs –