Inhaltszusammenfassung zur Seite Nr. 1
Digital Camera
Operating Instructions
Model No.DMC-F1PP
Before use, please read these
instructions completely.
For USA assistance , please call: 1-800-272-7033 or send e-mail to : consumerproducts@panasonic.com
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
VQT0B81
Inhaltszusammenfassung zur Seite Nr. 2
Safety Safety Dear Customer, Carefully observe copyright laws. We would like to take this opportunity to Recording of pre-recorded tapes or thank you for purchasing this Panasonic discs or other published or broadcast Digital Camera. Please read these material for purposes other than your Operating Instructions carefully and keep own private use may infringe copyright them handy for future reference. laws. Even for the purpose of private use, recording of certain material may be
Inhaltszusammenfassung zur Seite Nr. 3
Safety FCC Note: (U.S. only) Trade Name: Panasonic Model No.: DMC-F1 This equipment has been tested and Responsible party:Matsushita Electric found to comply with the limits for a Corporation of Class B digital device, pursuant to Part America One 15 of the FCC Rules. These limits are Panasonic Way, designed to provide reasonable Secaucus, NJ protection against harmful interference 07094 in a residential installation. This Support Contact: Panasonic equipment generates, u
Inhaltszusammenfassung zur Seite Nr. 4
Taking Pictures using Spot Mode........ 44 Contents Compensating the Exposure ............... 45 Taking Pictures using Auto Exposure (AE) Bracket...................................... 46 Safety Using the AF/AE Lock.......................... 47 Information for Your Safety ....................2 Picture Adjustment (Natural/Standard/Vivid).................... 48 Preparation Setting the White Balance ................... 49 Standard Accessories ............................5 Setting ISO Se
Inhaltszusammenfassung zur Seite Nr. 5
16 Preparation Preparation Digital Camera Accessory Order Form Others (For USA Customers) ....................... 93 The Menu Items ...................................82 Request for Service Notice.................. 94 Cautions for Use ..................................84 Limited Warranty (For USA Only)........ 95 Warning Indications..............................88 Customer Services Directory Troubleshooting ...................................89 (For USA Only) ........................
Inhaltszusammenfassung zur Seite Nr. 6
R E V DISPLAY MENU SET W T I E 12 8 Preparation Preparation Names of the Components [Front View] 1 Flash Sensor (P33) 1 2 3 4 2 Flash 3 Lens 4 Self-timer Indicator (P35) 5 Lens Barrel 6 Strap Eyelet (P18) 7 Lens Cover 7 5 6 [Top View] 8 Microphone (P29, P36, P66) 910 11 13 9 Mode Dial (P22) 10 Single/Burst Mode Button (P52) 11 Shutter Button (P21) 12 Power Switch (P17) 13 Zoom Button (P30, P31) [Back View] 14 Optical finder (P20, P25) 14 15 16 1718 15 Status Indicator (P17) 16 Flash
Inhaltszusammenfassung zur Seite Nr. 7
Preparation [Left View] 26 A/V OUT Socket (P76) 27 USB Socket (5pin) (P77) A/V OUT 28 Terminal Door 26 USB 27 28 [Right View] 29 DC IN Socket (P14) 30 Memory Card/Battery Door (P12, P15) 31 DC IN Terminal Door (P14) 30 DC IN 29 31 [Bottom View] 32 Tripod Receptacle 32 [Battery Charger/AC Adaptor] 1 1 AC Input Terminal 2 2 [POWER] Indicator 3 3 [CHARGE] Indicator 4 4 Battery Attachment Section 5 DC Output Terminal 5 7
Inhaltszusammenfassung zur Seite Nr. 8
Preparation LCD Monitor Display 1 2 3 4 5 6 7 2048 25 24 COOL 8 9 H 11 23 22 13 21 14 20 15 19 18 1 10:00 JAN.1.2003 F2.8 1/250 17 16 19 Current date and time (P24) [In recording] 1 REC mode (P22) It is displayed for about 5 seconds after turning on the power or setting 2 Flash mode (P32) the clock. 3 White balance (P49) 20 : Spot AF area (P44) 4 ISO sensitivity (P51) 5 Picture size (P37) 21 : Spot metering target (P44) 6 Quality (data compression ratio) (P38) 22 Focus indication
Inhaltszusammenfassung zur Seite Nr. 9
Preparation 1 3 6 1 2 3 4 5 6 2 4 5 7 2048 8 7 1/10 9 8 9 10 11 12 AUTO 10 10:00 JAN.1.2003 13 10:00 JAN 11 [In recording in Simple mode] [In playback] 1 Flash mode (P32) 1 Playback mode 2 Burst mode (P52) 2 DPOF (P60) (White): 3 Focus indication (P27) DPOF setting for printing 4 Shutter Jiggle alert (P26) (Green): 5 Picture mode (P27) DPOF setting for Slide Show (Green with DPOF number): 6 Battery indicator (P13) DPOF setting for printing and 7 Frame remain Slide Show 8 Zoom (P3
Inhaltszusammenfassung zur Seite Nr. 10
LOCK Preparation Quick Guide Prepare following items Camera 1 Battery Card AC adaptor AC cable Check that the power switch is set to [OFF] and the lens is stored. [Preparation] 1 Charge the battery. (1 # 2) (P11) 2 2 Charging is finished in about 90 minutes. 2 Slide the door in the direction of the arrow to open the Memory Card/battery door. 3 Insert the battery into the camera. (P12) 4 Insert the Card into the camera. (P15) 3 5 Close the Memory Card/battery door. [Rec
Inhaltszusammenfassung zur Seite Nr. 11
Preparation Charging the Battery 1 Connect the AC cable. The [POWER] indicator lights. 1 A 2 THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. 2 Attach the battery to the AC adaptor. (1 # 2) The [CHARGE] indicator B lights and charging starts. 3 When the [CHARGE] indicator B 2 turns off, charging is finished. Charging is finished in 90 minutes. 4 Remove the battery from the AC adaptor. 4 • The battery cannot be charged when the DC cabl
Inhaltszusammenfassung zur Seite Nr. 12
Preparation Inserting the Battery [Preparation] Check that the power switch is set to [OFF] and the lens is stored. [Inserting the battery] 1,4 1 Slide the door to the direction of the arrow to open the Memory Card/battery door. 2 Insert the charged battery all the way in, until it is locked 1. 3 Close the Memory Card/battery door. [Removing the battery] 4 Slide the door in the direction of the arrow to open the Memory Card/battery door. 2 5 Slide the lock 1 in the direction o
Inhaltszusammenfassung zur Seite Nr. 13
Preparation ª Battery indicator The remaining battery power is displayed on the LCD Monitor. (This is not displayed when using AC adaptor) : The battery power is sufficient : The remaining power is a little low : The remaining power is low : Recharge or replace the battery ª Charging time and available recording time Measured under the following conditions: Shooting once every 30 seconds, flash every other shot. Measured using supplied 16MB SD Memory Card. Temperature: 77 F
Inhaltszusammenfassung zur Seite Nr. 14
Preparation Connecting to an Electrical Outlet If you use an AC adaptor as indicated in 3, you can use the camera without worrying about battery discharge. [Preparation] Check that the power switch is set to [OFF] and the lens is stored. 1 1 Connect the AC cable. 2 Open the DC IN terminal door 1. It is also possible to connect the DC cable to the camera with the Memory Card/battery door opened. 3 3 Connect the DC cable (supplied) to the camera. The camera becomes warm duri
Inhaltszusammenfassung zur Seite Nr. 15
LOCK Preparation Inserting the Card [Preparation] Check that the power switch is set to [OFF] and the lens is stored. [Inserting the card] 1 Slide the door in the direction of the 1,4 arrow to open the Memory Card/battery door. 2 Insert the card all the way in until it clicks. Check the direction of the card. Do not touch the connection terminals on the back side of the card. 3 Close the Memory Card/battery door. [Removing the card] 4 Slide the door to the direction of the
Inhaltszusammenfassung zur Seite Nr. 16
Preparation ª Access to the card ª SD Memory Card (supplied) and MultiMediaCard (optional) When the card is being accessed, the flash/access indicator 1 and card The SD Memory Card and access indication 2 lights. MultiMediaCard are small, lightweight, removable external cards. The SD Memory Card is equipped with a write protection switch that can inhibit writing and formatting. (When the switch is moved towards the [LOCK] side, it is not possible to write or delete data on t
Inhaltszusammenfassung zur Seite Nr. 17
Preparation Turning Power on/off 1 Set the power switch to [ON]. 1,2 The Status indicator lights. 1 2 Set the power switch to [OFF]. OFF ON When the power switch is turned on, do not hold the lens cover. If the lens cover does not open, [SYSTEM ERROR] is displayed. Turn the power switch off and on. When turning the power switch off, do not hold the lens cover. If the lens cover does not close, the power turns off with it opened. Turn the power switch on and off. When turni
Inhaltszusammenfassung zur Seite Nr. 18
Preparation Attaching the Strap 1 Pass the top of the strap through the strap eyelet 1. 2 Pass the opposite side of the strap through its ring shaped part. 3 Pull the strap. 18
Inhaltszusammenfassung zur Seite Nr. 19
Preparation Using the LCD Monitor Every time you press the [DISPLAY] button, the display of the LCD Monitor changes as DISPLAY shown below. [In recording] 2048 19 [In playback] 2048 2048 100 0001 100 0001 1/10 1/10 F 2.8 1/200 AUTO 10:00 JAN.1.2003 10:00 JAN.1.2003 19
Inhaltszusammenfassung zur Seite Nr. 20
Preparation Using the Optical Viewfinder Parallax compensation mark If you take a picture of the subject at a distance between 2.3 feet (70 cm) - 3.94 feet (120 cm) with the zoom in tele position, match the top and left of the subject with the parallax compensation , in order not to cut it. When an accurate mark 1 framing is necessary, use the LCD monitor. 20
