Inhaltszusammenfassung zur Seite Nr. 1
Fujitsu LifeBook
T Series
BIOS Guide
LifeBook T Series Model:
T3010/T3010D
Document Date: 09/16/03
Document Part Number: FPC58-0992-01
FUJITSU PC CORPORATION
1
Inhaltszusammenfassung zur Seite Nr. 2
LifeBook T Series Tablet PC T Series BIOS BIOS SETUP UTILITY POINTS ■ Selecting a field causes a help message about that The BIOS Setup Utility is a program that sets up the field to be displayed on the right-hand side of the operating environment for your tablet. Your BIOS screen. is set at the factory for normal operating conditions, ■ Pressing the Enter key with the highlight on a selec- therefore there should be no need to set or change the tion that is not a submenu or auto selection
Inhaltszusammenfassung zur Seite Nr. 3
Main Menu POINTS ■ If your tablet emits a series of beeps that sounds like a code and the display is blank, please refer to the Trou- bleshooting section of your system Use’s Guide. The Troubleshooting Section includes a list of error mes- sages and their meanings. ■ If your data security settings require it, you may be asked for a password before the operating system will be opened. 3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] k
Inhaltszusammenfassung zur Seite Nr. 4
▲ ▲ LifeBook T Series Tablet PC MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current the field’s function and any special information needed system parameters. Follow the instructions for Navi- to help understand the field’s use. Note that the actual gating Through The Setup Utility to make any changes. drive labels shown may vary. (See Navigating Through the Setup Utility on page 2 for more information) POINT System Time and System Date can als
Inhaltszusammenfassung zur Seite Nr. 5
Main Menu Table 1: Fields, Options and Defaults for the Main Menu Menu Field Options Default Description Primary The product # of Display the type of device on this ATA/ATAPI interface, if there is Selects Primary Master: the Hard Drive one. Pressing the Enter key selects the Primary Master submenu Master submenu allowing additional device configuration options for this interface. ■ Language: English (US) [English (US)] The default setting differs between the US/European and the ■ Japanese mod
Inhaltszusammenfassung zur Seite Nr. 6
▲ LifeBook T Series Tablet PC Primary Master Submenu of the Main Menu The Primary Master submenu identifies what ATA Note that actual hard drive label shown may vary. devices are installed. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed. PhoenixBIOS Setup Utility Main Primary Master [TOSHIBA MK4021GAS-(PM)] Item Specific Help Type: [Auto] Select ATA/ATAPI drive LBA Format installed here. Total Sectors: 78140160 Max
Inhaltszusammenfassung zur Seite Nr. 7
Main Menu Menu Field Options Default Description ■ Heads: A number between –— This item is active only when Hard Disk is selected as type. You can 1 and 16 change the value by incrementing (pressing the [Spacebar]) or by typing in the number. ■ Sectors: A number between –— This item is active only when Hard Disk is selected as type. You can 0 and 63 change the value by incrementing (pressing the [Spacebar]) or by typing in the number. ■ Maximum Display only –— Displays the maximum capacity
Inhaltszusammenfassung zur Seite Nr. 8
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ LifeBook T Series Tablet PC ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: Follow the instructions for Navigating Through the ■ Set the I/O addresses for the infrared ports. Setup Utility to make any changes. ■ Set the features of the keyboard/mouse. (See Navigating Through the Setup Utility on page 2 for ■ Select between the display panel and/or an external more information) CRT display. ■ Set internal device configurations The follo
Inhaltszusammenfassung zur Seite Nr. 9
Main Menu Table 3: Fields, Options and Defaults for the Advanced Menu Menu Field Description IrDA Port Configurations When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for infrared ports. Keyboard/Mouse When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal Features keyboard and mouse parameters. Video Features When selected, opens the Video Features submenu, which allows setting of the display para
Inhaltszusammenfassung zur Seite Nr. 10
▲ LifeBook T Series Tablet PC IrDA Port Configuration Submenu of the Advanced Menu The IrDA Port Configuration submenu provides the ability to set the I/O addresses and interrupt levels for CAUTION the infrared ports of your tablet. I/O addresses, DMA channels, and Interrupt levels can be entered in various ways, including via the BIOS setup POINTS utility, the control software for the I/O device, or the ■ To prevent IRQ and address conflicts, avoid changing hardware. If any two ports or
Inhaltszusammenfassung zur Seite Nr. 11
Advanced Menu Table 4: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu Menu Field Options Default Description ■ Infrared Port: Disabled [Enabled] Configures the infrared port using either no configuration (Disabled), a ■ user defined configuration (Enabled), or by allowing the BIOS or OS to Enabled ■ choose the configuration (Auto). Auto ■ Mode: IrDA [FIR] Select whether to use normal infrared or fast infrared mode. ■ FIR ■ I/O Address: 3F8 - 3FF [2E8 - 2EF] A
Inhaltszusammenfassung zur Seite Nr. 12
▲ LifeBook T Series Tablet PC Keyboard/Mouse Features Submenu of the Advanced Menu The Keyboard/Mouse Features submenu is for setting the parameters of NumLock. PhoenixBIOS Setup Utility Advanced Security Power Savings Exit Keyboard/Mouse Features Item Specific Help Numlock: [Off] Selects power-on state for Numlock. F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 5. Keyboard/Mouse Features Submenu Ta
Inhaltszusammenfassung zur Seite Nr. 13
▲ Advanced Menu Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Video Features Item Specific Help Display: [Auto] Select display terminal. Compensation: [Disabled] F1 Help Select Item -/Space Change Values F9 Setup Defaults ESC Exit Select Menu Enter Select Sub-Menu F10 Save and Exit Figure 6. Video Features Submenu Table 6: Fields, Options and Default
Inhaltszusammenfassung zur Seite Nr. 14
▲ LifeBook T Series Tablet PC Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Internal Device Configurations [Disabled] IDE Contoller: [Enabled IDE port is disabled. Modem Controller: [Enabled] LAN Controller: [Auto] [Enabled] IDE port is enabled. F1 Help Select Item -/Space Change Values F9 S
Inhaltszusammenfassung zur Seite Nr. 15
▲ Advanced Menu CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit CPU Features Item Specific Help Select Enhanced Intel(R) SpeedStep(R) SpeedStep(R) Technology: [Enabled] On Battery: [Battery Optimized] Technology enabled or On AC: [Maximum Performance] disabled. F1 Help Select Item -/Space Change Values F9 S
Inhaltszusammenfassung zur Seite Nr. 16
▲ LifeBook T Series Tablet PC USB Features Submenu of the Advanced Menu The USB Features Submenu configures the USB features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit USB Features Item Specific Help [Enabled] Legacy USB Support: [Disabled] SCSI SubClass Support: [Disabled] The feature is disabled. [Enabled] Legacy Floppy Emulation is enabled and USB floppy is available without USB aware OS. F1 Help Select Item -/Space Change Values
Inhaltszusammenfassung zur Seite Nr. 17
▲ Advanced Menu Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures miscellaneous features for your system. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Item Specific Help Miscellaneous Configurations Power Button: [Disabled] Configures the power Wake up on LAN: [Disabled] button. Auto Save To Disk: [Off] Volume Setting: [Middle] *ACPI OS ignores this setting. F1 Help Select Item -/Space Change Values F9
Inhaltszusammenfassung zur Seite Nr. 18
▲ LifeBook T Series Tablet PC Event Logging Submenu of the Advanced Menu The Event Logging Submenu configures event logging features for DMI events. PhoenixBIOS Setup Utility Main Advanced Security Power Savings Exit Event Logging Item Specific Help Event Log Capacity: Space Available Press key to Event Log Validity: Valid view the contents of the event log. View Event Log: [Enter] Event Logging: [Enabled] System Boot Event: [Disabled] Clear All Event Logs
Inhaltszusammenfassung zur Seite Nr. 19
▲ ▲ ▲ Security Menu SECURITY MENU – SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security POINT features of your tablet to fit your operating needs and to ■ view the current data security configuration. Follow the If you set a password, write it down and keep it in a instructions for Navigating Through the Setup Utility to safe place. If you forget the password you will have to contact your support representative to regain access make any changes. (See
Inhaltszusammenfassung zur Seite Nr. 20
LifeBook T Series Tablet PC Figure 12. Security Menu Table 12: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –— Clear A display-only field. Set is displayed when the system Supervisor Password is: Password is set and Clear when it is not. User Password is: –— Clear A display-only field. Set is displayed when the general User Password is set, and Clear when it is not. Set Supervisor [Enter] [Enter] Sets, changes or cancels Supervisor Pass
