Inhaltszusammenfassung zur Seite Nr. 1
C122-E003-02EN
Front Cover
REFERENCE MANUAL :
GUI/COMMANDS
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
FOR SAFE OPERATION This manual contains important information regarding the use and handling of this product. Read this manual thoroughly. Pay special attention to the section "NOTE ON SAFETY" Use the product according to the instructions and information available in this manual. Keep this manual handy for further reference. Fujitsu makes every effort to prevent users and bystanders from being injured or from suffering damage to their property. Use the product according to this manual. AB
Inhaltszusammenfassung zur Seite Nr. 4
RADIO FREQUENCY INTERFERENCE STATEMENT The following notice is for EU users only. . WARNING: This is a product which meets Class A of EN55022. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. The following notice is for USA users only. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re
Inhaltszusammenfassung zur Seite Nr. 5
TRADEMARK ACKNOWLEDGEMENTS Microsoft, Windows, MS, Windows NT, and Windows Server are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Linux is a trademark or registered trademark of Linus Torvalds in the United States and other countries. Red Hat, RPM, and all Red-Hat-based marks and logos are trademarks or registered trademarks of Red Hat, Inc. in the United States and other countries. Intel, Xeon, and Itanium2 are trademarks
Inhaltszusammenfassung zur Seite Nr. 6
Inhaltszusammenfassung zur Seite Nr. 7
Revision History (1/1) Revised section Edition Date (Added/ Deleted/ Details Altered)(Note) 01 2005-07-11 02 2005-09-16 All Chapters (correction) Technical brushup Chapter 5 (correction) Addition of description for Windows version Note: In this table, the revised section is indicated by its section number in the current edition. An asterisk (*) indicates a section in the previous edition. C122-E003-02EN
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
Preface 1 This manual describes how to operate and maintain the system using the Web-UI and command line interface (CLI) provided with the PRIMEQUEST-series machine. Read this manual together with the manuals referenced in this manual. This section explains: Structure and Contents of This Manual Other Reference Manuals Text Conventions Syntax of the Command Line Interface (CLI) Environmental Requirements for Using This Product Conventions for Alert Messages Structure and Contents of T
Inhaltszusammenfassung zur Seite Nr. 10
Preface Part 3 PSA CHAPTER 5 Web-UI Operations Provides a list of menus and describes the windows and use of the MMB Web-UI for PSA operations. CHAPTER 6 CLI Operations Describes use of the CLI for PSA operations. Part 4 GSWB CHAPTER 7 Web-UI Operations Describes the windows and operations used when manipulating the GSWB via the MMB Web-UI and provides a list of menus for these operations. CHAPTER 8 CLI Operations Describes the use of the CLI for GSWB operations. Part 5 EFI CHAPTER 9 EFI
Inhaltszusammenfassung zur Seite Nr. 11
Preface Other Reference Manuals The following manuals are provided for reference: a) Printed manuals PRIMEQUEST 480/440 Installation Manual (C122-E001EN) b) PDF manuals included on the PRIMEQUEST Manual CD-ROM disk (C122-E013- C2) PRIMEQUEST 480/440 System Design Guide (C122-B001EN) PRIMEQUEST 480/440 Installation Planning Manual (C122-H001EN) PRIMEQUEST 480/440 Installation Manual (C122-E001EN) PRIMEQUEST 480/440 Operation Manual (C122-E002EN) PRIMEQUEST 480/440 Reference Manual: Messages/Log
Inhaltszusammenfassung zur Seite Nr. 12
Preface Syntax of the Command Line Interface (CLI) The command syntax is described below. Command syntax The command syntax is as follows: A variable that requires input of a value must be enclosed in < >. An optional element must be enclosed in [ ]. A group of options for an optional keyword must be enclosed in [ ] and delimited by |. A group of options for a mandatory keyword must be enclosed in { } and delimited by |. The command syntax is shown in a frame such as this one. Environment
Inhaltszusammenfassung zur Seite Nr. 13
Preface Alert messages in the text In the text, alert messages are indented to distinguish then from regular text. A wider space precedes and follows the message to show where the message begins and ends. Certain tasks in this manual should only be performed by a certified service engineer. Users must not perform these tasks. Incorrect operation of these tasks may cause electric shock, injury, or fire. Installation and reinstallation of all components, and initial settings Removal of front
Inhaltszusammenfassung zur Seite Nr. 14
Inhaltszusammenfassung zur Seite Nr. 15
NOTE ON SAFETY 2 Important Alert Messages This manual provides the following important alert signals: This indicates a hazardous situation that could result in minor or moderate personal injury if the user does not perform the procedure correctly. This signal also indicates that damage to the product or other property may occur if the user does not perform the procedure correctly. Task Warning Page P.2-1 Normal Malfunction The MMB Web-UI supports the Web browsers listed operation below. N
Inhaltszusammenfassung zur Seite Nr. 16
Inhaltszusammenfassung zur Seite Nr. 17
Product Handling 3 Maintenance Certain tasks in this manual should only be performed by a certified service engineer. Users must not perform these tasks. Incorrect operation of these tasks may cause electric shock, injury, or fire. Installation and reinstallation of all components, and initial settings Removal of front, rear, or side covers Mounting/de-mounting of optional internal devices Plugging or unplugging of external interface cards Maintenance and inspections (repairing, and reg
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Structure and Contents of This Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Other Reference Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 20
Contents 3.2.2 System Event Log window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 3.2.2.1 System Event Log Filtering Condition window . . . . . . . . . . . 3-13 3.2.2.2 System Event Log (Detail) window . . . . . . . . . . . . . . . . . . . . 3-16 3.2.3 System Information window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18 3.2.4 Firmware Information window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 3.2.5 System Setup windo
