Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
SOFTWARE LICENSE AGREEMENT Aastra Telecom Inc., hereinafter known as "Seller", grants to Customer a personal, worldwide, non-transferable, non-sublicenseable and non-exclusive, restricted use license to use Software in object form solely with the Equipment for which the Software was intended. This Product may integrate programs, licensed to Aastra by third party Suppliers, for distribution under the terms of this agreement. These programs are confidential and proprietary, and are protect
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Overview........................................................................................................................................ 1 General Requirements ................................................................................................................ 1 About this Guide.......................................................................................................................... 1 Methods of Installation.............................
Inhaltszusammenfassung zur Seite Nr. 4
Limited Warranty ......................................................................................................................... 62 Exclusions ................................................................................................................................. 62 Warranty Repair Services ......................................................................................................... 63 After Warranty Service ......................................................
Inhaltszusammenfassung zur Seite Nr. 5
Overview This SIP 480i IP Phone Administration • Vertical 480i IP Phone Installation Guide provides information on the basic Guide – contains installation and set- network setup that is required for the SIP up instructions, information on 480i IP phone. It also includes details on general features and functions, and the functioning and configuration of the basic options list customization. 480i phone. General Requirements • Vertical SIP 480i IP Phone Administration Guide–
Inhaltszusammenfassung zur Seite Nr. 6
480i IP Phone Set up Methods of Installation When the 480i is first plugged in or reset The firmware set up and installation for it will automatically download any the 480i can be done through the firmware updates for the phone. The Options List available directly from the binary and configuration files that are phone or through the Vertical 480i Web required for the 480i are: “firmware.st”, Client web interface. When the 480i is “aastra.cfg” and “.cfg”. The initialized for the
Inhaltszusammenfassung zur Seite Nr. 7
The 480i’s Options List Network: 1. Press the button on the phone to enter the options list. If DHCP is enabled, all the Network 2. Use the and to scroll settings are automatically configured. The 480i’s firmware allows the network through the list of options. 3. Press the Show softkey, the settings to be manually entered, if for button or press the number any reason the phone cannot populate corresponding to the option to any of the settings with DHCP enabled. select an option.
Inhaltszusammenfassung zur Seite Nr. 8
1. Primary TFTP: This is the is selected, the SIP phone's IP IP address of the TFTP server address is immediately deleted that the phone will use by from the Registrar's database, default. If the TFTP address and the phone’s screen displays is obtained through DHCP, it "No Service". will override this setting. If 6. User Name DHCP is ON, the primary This is used in the name field of TFTP is read only. the SIP URI for the 480i phone 2. Alternate TFTP: This and for registering the 48
Inhaltszusammenfassung zur Seite Nr. 9
11. Nortel configuration files to the phone, or This is used to specify if a Nortel • If the settings for the 480i on NAT is being used. Select “Yes” the IP PBX system had been to enable this feature if using a modified. Nortel call server. 4. Factory Default Phone Status: This option lets you reset the The following options display the phone back to the factory default phone’s status or allow you to power settings, including the network cycle the phone or reset the phone to
Inhaltszusammenfassung zur Seite Nr. 10
The Vertical 480i Web Client To access the Vertical 480i Web Client, open your web browser (supports Internet Explorer and Gecko engine based browsers like Firefox, Mozilla or Netscape) and enter the phone’s IP address into the address field, starting with the web prefix “http://”. In the side menu of the Vertical 480i • The ADMIN category contains Web Client, there are three main administrator only configurable categories: Status, User and Admin. sub-categories: Network, Fir
Inhaltszusammenfassung zur Seite Nr. 11
From the Web Client: 480i IP Phone Configuration 1. Click on the Network sub- category under the ADMIN main The Network and SIP options within the category. 480i phone can be configured from the 2. Enter the administrator’s user phone or from the Vertical 480i Web name and password (the default Client web interface. Some options can name is “admin” and password is also be set through the configuration “22222”). files. Administrator level options are 3. In the web page that has ju
Inhaltszusammenfassung zur Seite Nr. 12
Alternate. If DHCP is on, the Primary TFTP is read-only. To When an IP address has been assigned to manually configure the TFTP the phone, you have the option to either address, select Alternate TFTP. continue configuring the 480i through Select Use Primary/Use the button on the phone or to Alternate to choose between the start using the Vertical 480i Web primary and alternate TFTP Client. See the section “The Vertical server. 480i Web Client” within this guide for details.
Inhaltszusammenfassung zur Seite Nr. 13
4. Select options 1-5 to change the From the Web Client: information about the registrar and the proxy server. 1. Click on the SIP Settings sub- 5. Select option 6. User Name to category under the ADMIN main change the user name. category. 6. Select option 7. Display Name to 2. Enter the administrator user change the display name. name and password (the default 7. Select option 8. Screen Name to user name is “admin” and change the screen name. password is “22222”). 8. Select option 9.Au
Inhaltszusammenfassung zur Seite Nr. 14
Setting Parameters through Configuration Files The following are the parameters that can be used to configure the 480i phone through the configuration files - aastra.cfg and .cfg. The "aastra.cfg" file configures the settings server wide, while the configures only the phones with the MAC address for which the file is named. The settings in the "aastra.cfg" file will be overridden by the settings that also appear in the cfg file. Options List Settings This section contains
Inhaltszusammenfassung zur Seite Nr. 15
Parameter headset mic Configurable through the phone’s options list or the volume configuration files Description Sets the headset mic volume Format Integer (1:low; 2:medium; 3:high) Default Value 1 Range 1-3 Example headset mic volume: 2 Parameter language Configurable through the phone’s options list or the configuration files Description Sets the phone’s language Format Integer (0:english; 1: French; 2: spanish) Default Value 0 Range 0, 1, 2 Example language: 2
Inhaltszusammenfassung zur Seite Nr. 16
Parameter ip Configurable through the 480i's Options List, the Vertical 480i web client or through the configuration files Description This parameter assigns a static IP address to the 480i device. Format IP address Default Value 0.0.0.0 Range Not Applicable Example ip: 192.168.0.25 Parameter subnet mask Configurable through the 480i's Options List, the Vertical 480i web client or through the configuration files Description The subnet mask IP address. Format IP address Default Val
Inhaltszusammenfassung zur Seite Nr. 17
Parameter dns1 Configurable through the 480i's Options List, the Vertical 480i web client or through the configuration files Description Primary domain name servers’ IP address. For any of the IP address settings on the 480i a domain name value can be entered instead of an IP address. With the help of the domain name servers the domain names for such parameters can then be resolved to their corresponding IP addresses. Format IP address Default Value 0.0.0.0 Range Not Applicable Exampl
Inhaltszusammenfassung zur Seite Nr. 18
Parameter alternate tftp Configurable through the phone’s option list, the web client server or the configuration files Description The ip address of the alternate tftp server Format ip Default Value 0.0.0.0 Range Not applicable Example alternate tftp server: 192.143.0.7 Parameter use alternate tftp Configurable through the phone’s option list, the web client or the configuration files Description Flag to enable or disable the alternate tftp server Format Integer Default Value 1
Inhaltszusammenfassung zur Seite Nr. 19
Parameter user password Configurable through the web client or the configuration files Description Password for the phone’s user Format Text – can be an alphanumeric combination. Maximum of 10 characters Default Value Not applicable Not applicable Range Example user password: bob132cat Configurable through the configuration files only Parameter sip rtp port Description Indicates the port through which the RTP packets will be sent to. The RTP port is used for sending DTMF tones and
Inhaltszusammenfassung zur Seite Nr. 20
Parameter resync period Configurable through the configuration files only Description Indicates how often in seconds the phone will check for config parameter updates. 0: indicates that this feature is disabled. Format Integer Default Value 600 Range 0 –2 ^ 31 - 1 Example resync period: 700 Parameter firmware file Configurable through the configuration files only name Description Firmware file name. When Auto Resync triggers, a check is made for the specified firmware file. If the
