Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Internet IP Telephone
Model No.: SP5100/S
Website: http://www.micronet.info
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents 1. OVERVIEW OF THE IP PHONE .............................................................................................................. 3 1.1. HARDWARE OVERVIEW ....................................................................................................................... 4 1.2. SOFTWARE FEATURES AND SPECIFICATION .......................................................................................... 9 1.3. PHYSICAL SPECIFICATION & ENVIRONMENT ..............
Inhaltszusammenfassung zur Seite Nr. 3
4.14. [SECURITY] COMMAND....................................................................................................................... 45 4.15. [VOICE] COMMAND ............................................................................................................................ 46 4.16. [TOS] COMMAND................................................................................................................................47 4.17. [BUREAU] COMMAND ...........................
Inhaltszusammenfassung zur Seite Nr. 4
1. Overview of the IP Phone IP-Phone is a full-featured IP-based telephone set via Ethernet base communication. Over the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call and local PSTN/PBX Extension call via PSTN Gateway. IP-Phone provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office LAN and PC simultaneously. It is compatible with ADSL or Cable Modem provided by ITSP, ISP or Carrier Company to provide VoIP services to res
Inhaltszusammenfassung zur Seite Nr. 5
1.1. Hardware Overview Front View and Keypad function ● LCD: 2 lines, 24 character Dot Matrix display. ● C: Jump out current LCD menu. ● : Move to previous selection or clear previous data. ● : Move to right or next selection. ● OK: Press OK to confirm the modification. ● Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial according to phone book data from 1-10 (please refer to LCD configuration-3.Phone Book; Advanced Configurations via Telnet- 1
Inhaltszusammenfassung zur Seite Nr. 6
3 “D” ; “E” ; “F” ; “3” 4 “G” ; “H” ; “I” ; “4” 5 “J” ; “K” ; “L” ; “5” 6 “M” ; “N” ; “O” ; “6” 7 “P” ; “Q” ; “R” ; “S” ; “7” 8 “T” ; “U” ; “V” ; “8” 9 “W” ; “X” ; “Y” ; “Z” ; “9” * “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*” ; “’” ; “+” ; “$” ; “*” 0 “Space” ; “0” # “#” (2) Digit mode: 1 “1” 2 “2” 3 “3” 4 “4” 5 “5” 6 “6” 7 “7” 8 “8” 9 “9” * “.” 0 “0” # ● MUTE: Mute the voice of MIC and let others can’t hear from user in communication. ● PSTN: Press PSTN to switc
Inhaltszusammenfassung zur Seite Nr. 7
side. ● HOLD: To hold a call, after press HOLD button, both sides will hear hold tone. ● SPEED: 1. Press SPEED and number (Phone book index) after off-hook can do speed dial according to phone book data (please refer to 3.LCD configuration-6. Phone Book or Advanced Configurations via 4.Telnet- 10.[pbook] command). 2. Switch input mode between character mode or digit mode, e.g., when user wants to input phone number can press SPEED to switch input mode as digit mode; when user wants
Inhaltszusammenfassung zur Seite Nr. 8
Note: All function keys mentioned above (except dialing keypad) are effective only in IP Phone mode. Back View DC 9V: DC 9V power input outlet LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5 cable. PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable Line: RJ-11 connector, connected directly to the PSTN analog line. Note: There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port. W
Inhaltszusammenfassung zur Seite Nr. 9
Ethernet connector （LAN ） RJ-11connector ： RJ-11 connector is for connecting IP-Phone with PSTN. RJ11connector 8
Inhaltszusammenfassung zur Seite Nr. 10
1.2. Software Features and Specification Application: ● ISP/ITSP (Internet Telephony Service Provider) ● IP-PBX with office telephony services ● Multi-nation enterprise communication ● SOHO Telephony Calling Features ● Call Hold ● Call Transfer ● Call Forward (**) ● 10 sets last number Redial ● Ten configurable speed dials Network Supported ● Fixed IP ● Dynamic Host Configuration Protocol (DHCP) ● PPPoE connection (When PPPoE disconnect, IP-Phone can automatically re-conne
Inhaltszusammenfassung zur Seite Nr. 11
Provisioning and Configuration ● SIP (RFC3261) compliance ● LCD configuration password protection ● Provide Proxy Mode or Peer-to-Peer Mode (Non Proxy Server needed) selection ● Ring tone, Speaker and Handset volume adjustable ● Dial path selection (PSTN or IP mode) ● Support DNS server inquiry Management Features: ● Software Upgrade: TFTP/FTP download ● Three easy ways for system configuration 1. LCD Front Panel 2. Web Browser 3. TELNET Certification CE, 3C 10
Inhaltszusammenfassung zur Seite Nr. 12
1.3. Physical specification & Environment Dimension: 215mm(W) x 71mm(H) x 198mm(D) Weight: 834 grams (unit) Power Supply: DC 9V output adaptor, AC 120Vac input Operation Environment: Humidity: 10 to 90 % (Non-condensing) Operational Temperature: 0 to +40 °C Storage Environment: Humidity: 10 to 90 % (Non-condensing) Storage Temperature: -10 to +50 °C Analog Specification: 2 wires (RJ-11) *1 (Voltage: -48V) AC Impedance 600 Ω 11
Inhaltszusammenfassung zur Seite Nr. 13
2. Configuring the IP-Phone - LCD Menus Note: 1. After any configuration is made for the IP-Phone , user has to do Reboot in the selection 7 “Reboot”. 2. We suggest user to set IP address via LCD menu 5 →2.3.4.5 first, then go to chapter 3 to do other detail configurations via web browser. 2.1. Initialize IP-Phone When power on the IP-Phone, the LCD screen shows as below. Now IP-Phone is running Boot sector program. IP-Phone Board Start Booting When IP-Phone finishes
Inhaltszusammenfassung zur Seite Nr. 14
notice that user must plug PSTN line in RJ-11 port when IP-Phone is in PSTN mode. (**) IP-Phone PSTN 10:10:10 AM Press or to enter configuration mode then press OK button to enter sub menus; press C can jump out current menu to previous level. 1. Call List (**) 2. Forward Type 3. Phone Book 4. Ringer Settings 5. Network 6. Advanced Settings (protected by password) 7. Reboot Note: (**): May be not available right now, please contact with your distribut
Inhaltszusammenfassung zur Seite Nr. 15
2.2. LCD Menu Configuration User can set the following configurations by LCD keypad. Note: 1. Press TRANSFER before input data can switch characters to be capital or lowercase. 2. Press SPEED before input data can switch input mode as character mode or digit mode; for example, user wants to enter IP address, after pressing SPEED can enter digits directly. 3. When user is inputting data, press C will jump out to menu list, press will clear previous input data. 1. Call List (**) If
Inhaltszusammenfassung zur Seite Nr. 16
Enter a forwarded phone number to activate no response forward function. B. Deactivate Deactivate No Response Forward function. 3. Unconditional It is included the above two types. Whether the IP-Phone is in which status, calls will be automatically forwarded to the assigned phone number. A. Activate Enter a forwarded phone number to activate Unconditional Forward function. B. Deactivate Deactivate Unconditional Forward function. 3. Phone Book 1. List List all records of
Inhaltszusammenfassung zur Seite Nr. 17
5. Network 1. Information User can press or to check current network status: ● Mode: Display current network connection mode of IP-Phone to be Static (Fixed IP), DHCP, or PPPoE. Note: When IP-Phone is under DHCP mode, then change to Static mode, the following items: IP address, Subnet Mask, Default Gateway, will display empty, after reboot, user can see information again. ● IP, Mask, Gateway: display current IP information. 2. Network Mode Set network mode of IP-Phone to be St
Inhaltszusammenfassung zur Seite Nr. 18
IP-Phone will keep trying to connect. On the other hand, if user disables this function, IP-Phone won’t reboot and keep trying to connect. 8. SNTP Configuration (1) SNTP Mode: User can set SNTP function to be on or off, which means IP-Phone will capture current time from SNTP server or not. (2) SNTP Server: User can specify a SNTP server for IP-Phone to capture current time. (3) Time Zone: User can set time zone via pressing or according to the location IP-Phone is. For exa
Inhaltszusammenfassung zur Seite Nr. 19
2. Proxy ● Proxy Set Proxy IP address or Domain Name. ● Outbound proxy Set Outbound Proxy IP address or Domain Name. ● Proxy port Set Proxy port for IP-Phone to send messages. ● Expire (in seconds) Set expire time of registration, in the duration of 2/3 expire time, IP-Phone will re-register to Proxy Server again. 3. User Info ● User Name Set User Name of IP-Phone to register to Proxy Server. If Proxy server doesn’t request specific User name, please enter Line number here.
Inhaltszusammenfassung zur Seite Nr. 20
User has to input user name for FTP server login .It is necessary for upgrading IP-Phone new application rom file via FTP method. 4. FTP Password User has to input password for FTP server login .It is necessary for upgrading IP-Phone new application rom file via FTP method. 5. File Name User has to press the file name of new application rom file prepared for upgrading 6. Application Version Show current version of application. 7. Start to Upgrade Select YES or NO to start upgr
