Bedienungsanleitung Grandstream Networks Grandstream GXP2100

Inhaltszusammenfassung zur Seite Nr. 1

Grandstream Networks, Inc.
1297 Beacon Street, 2nd Floor
Brookline, MA 02446. USA
Tel : +1 (617) 566 – 9300
Fax: +1 (617) 249 – 1987
www.grandstream.com
GXP2100 4-Line IP Phone
Quick Start Guide
For Warranty and RMA information, please visit www.grandstream.com

Inhaltszusammenfassung zur Seite Nr. 2

EN PRECAUTIONS: The GXP2100 is not pre-configured to support or WARNING: Please DO NOT power cycle the GXP2100 when the LED carry emergency calls to any type of hospital, law lights are flashing during system boot up or firmware upgrade. You may corrupt enforcement agency, medical care unit (“Emergency firmware images and cause the unit to malfunction. WARNING: Use only the power adapter included in the GXP2100 package. Service(s)”) or any other kind of Emergency Service. Using an a

Inhaltszusammenfassung zur Seite Nr. 3

Installing the phone (Phone Stand) : PHONE SETUP: For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. CONNECTING THE PHONE: Slots for the Refer to the illustration below when following the setup instructions . wall mount and phone stand Handset Port PC Port Installing the phone (Wall Mount): 1. Attach the wall mount to the slot on the back of the phone. LAN Port Power Headset Port 2. Attach

Inhaltszusammenfassung zur Seite Nr. 4

Tips For Using the Keypad: Message Waiting Indicator Message Line Keys Volume Soft Keys Navigation Keys Mute Menu/OK Key Transfer Contact Conference Headset Intercom Standard Keypad Multipurpose Keys Send Speaker Hold Configure the GXP2100 using the Keypad: 1. Make sure the phone is idle 2. Press the “MENU” button to access the keypad MENU to configure the phone. 1. To access the MENU, press the round MENU button. 3. Select MENU-> Config, to configure settings for SIP Proxy, Outbound Proxy, 2