Inhaltszusammenfassung zur Seite Nr. 1
2-Line Intercom Speakerphone
DECT6.0 Cordless Handset
User’s Guide
Please read this manual
before operating product
for the first time.
Model 25210
Inhaltszusammenfassung zur Seite Nr. 2
Important Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment. Y
Inhaltszusammenfassung zur Seite Nr. 3
Important Information 2 Rights of the Telephone Company Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately. In case of such temporary discontinuance, the telephone company must: (1) prom
Inhaltszusammenfassung zur Seite Nr. 4
Important Information Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Licensing Licensed under US Patent 6,427,009. Hearing Aid Compatibility This telephone system meets FCC standards for Hearing Aid Compatibility. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be insta
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents EquipmEnt ApprovAl i nformA tion .............2 Schingwit Between the SPP eaker hone , i ntEE rf E r ncE i A nform tion .........................3 h anDSet , D an h eaDSet m D o e ............ 22 l icEnsing ................................................4 BaSe .................................................. 22 HEAring Aid c omp Atibility .......................4 c orDSS le h anDSet ............................. 22 fcc rf r AdiA tion ExposurE s t AtEE m nt ....4 m ute ....
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents s oringt r Ecord in o nE -t oucH d A i ling (o ynl ApplicAblE for bAE s ) ...........................30 r eviewing Phone Book r ecorDS ............ 30 e Diting a Phone Book r ecorD ................ 31 c oPying a Phone Book r ecorD .............. 31 Deleting a Phone Book r ecorD ............. 32 Dialing a Phone Book r D ecor ............... 32 Dial a Phone Book recorD while in t alk moDe : ................................................. 32 Dial a Phone Book recorD while revi
Inhaltszusammenfassung zur Seite Nr. 7
Connections & Setup Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. IMPORTANT: Because cordless phones operate on electricity, you should have at least one phone in your home that isn’t cordless, in case the power in your home goes out. Parts Checklist Make sure your package includes the following items: Base Batt
Inhaltszusammenfassung zur Seite Nr. 8
Connections & Setup Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV, microwave ovens, or VCR. If
Inhaltszusammenfassung zur Seite Nr. 9
Connections & Setup Handset Layout Visual Indicator display 3 Soft keys DND/Privacy (button) Exit Spk (button) (Speaker button) CID VOL +/- (button) (buttons) DIR (button) Off (button) Talk (button) #Pause (button) * Tone (button) Mute/Del Redial (button) (button) Int/Hold (button) Menu/Flash (button)
Inhaltszusammenfassung zur Seite Nr. 10
Connections & Setup Base Layout Privacy (button) VOL +/- Voice mail1 DND CID (buttons) (button) (button) (button) Voice mail2 DIR Delete (button) (button) One Touch (button) (1-10) 3 Soft Keys buttons Exit (button) #Pause Charge Line 1 & 2 (button) LED (buttons) Mute Speaker (button) Headset (button) Intercom (button) (button) Flash Hold (button) (button) Page (button) Redial (button) 10
Inhaltszusammenfassung zur Seite Nr. 11
Connections & Setup Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before use. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Nickel-metal Hydride (Ni-MH) battery model 5-2734, which is compatible with this unit. 1. Locate battery which is packaged inside a plastic bag and is separate from the handset. 2. Locate the battery compartment on the back of the handset. 3. Plug the battery pack cord into the
Inhaltszusammenfassung zur Seite Nr. 12
Connections & Setup Base Station The phone may be connected to two line (RJ14C) wall jacks to accommodate all two lines. 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. CAUTION: To reduce risk of personal injury, fire, or damag
Inhaltszusammenfassung zur Seite Nr. 13
Connections & Setup 4. If you want to mount the telephone on the wall, you can plug the 2 lines such as the below drawing; Line 2 Line 1 -OR- Line 2 Line 1 -OR- Line 1 + 2 1
Inhaltszusammenfassung zur Seite Nr. 14
Programming the Telephone 5. Place the handset in the base cradle. The charge indicator illuminates, verifying the battery is charging. 6. Allow the phone to charge for 14 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised. NOTE: If the model you bought is a RE2 version, there is one additional charger. Plug the power supply cord into the power jack on the back of the charger and the other end into an electrical outlet. Place handset in th
Inhaltszusammenfassung zur Seite Nr. 15
Programming the Telephone Phone Setting 1. Make sure your phone is OFF (not in Talk mode). 2. Press the Menu button on HS or the MENU soft key (left) on BS to go to the main menu. 3. Press VOL (+ or -) button to scroll to Phone Setting. 4. Press SELECT soft key (right) to confirm and you may program the following items: Date/Time (base only), Auto Answer (handset only), Auto Answer Intercom (both base and handset), Dial Mode (base only), Area Code (base only), Registration (handset only
Inhaltszusammenfassung zur Seite Nr. 16
Programming the Telephone Auto Answer (only applicable for handset) This option allows you to pick up the handset from base to answer an incoming call without pressing the Talk/Spk/L1/L2 button. When it is set to off, this function is disabled in this handset. From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Auto Answer. 2. Press SELECT soft key. Use the VOL (+ or -) button to scroll to your selection. The default setting is Off. 3. Press SELECT soft key to save
Inhaltszusammenfassung zur Seite Nr. 17
Programming the Telephone Registration (only applicable to handset) A cordless handset will not operate until it is registered to the base. During the registration process, keep the handset near the base. Up to 10 cordless handsets can be registered to one base. NOTE: If a handset has not been registered to the base, then the screen displays “PRESS “REG” TO INITIATE REGISTRATION” once the handset has been activated. Press the REG soft key to start the registration. From the Phone Setting Men
Inhaltszusammenfassung zur Seite Nr. 18
Programming the Telephone De-Register (Only applicable for base) From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Deregistration. 2. Press SELECT soft key. The list of all registered handsets will be displayed, and use the VOL (+ or -) button to scroll to your selection. 3. Press the SELECT soft key. The screen displays “Remove handset?”. 4. Press YES soft key to confirm de-registration. The screen displays “Saved” and then displays “Press “REG” to initiate regis
Inhaltszusammenfassung zur Seite Nr. 19
Programming the Telephone From the Phone Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Update HS List. 2. Press SELECT soft key. 3. The latest handset name list stored in the base will be sent to all registered handsets. Display Setting 1. Make sure your phone is OFF (not in Talk mode). 2. Press the Menu button on HS or the MENU soft key on BS to go to the main menu. 3. Press VOL (+ or -) button to scroll to Display Setting. 4. Press SELECT soft key to confirm and you may
Inhaltszusammenfassung zur Seite Nr. 20
Telephone Operation Ring Tone There are 8 tone levels for your selection. They are Melody 1 to 8 for line 1 and line 2 respectively. From the Sound Setting Menu: 1. Press the VOL (+ or -) button to scroll to the Ring Tone. 2. Press SELECT soft key. 3. Use the VOL (+ or -) button to scroll to your selection and use the DIR or CID button to toggle between L 1 and L 2. The default setting is Melody 1 for both lines. 4. Press SELECT soft key to save your selection and the screen displays “Saved
